• ALEX DESIGN - BOEING 787-8 DREAMLINER FS2004
  • ALEX DESIGN - BOEING 787-8 DREAMLINER FS2004
  • ALEX DESIGN - BOEING 787-8 DREAMLINER FS2004
  • ALEX DESIGN - BOEING 787-8 DREAMLINER FS2004
  • ALEX DESIGN - BOEING 787-8 DREAMLINER FS2004
  • ALEX DESIGN - BOEING 787-8 DREAMLINER FS2004
  • ALEX DESIGN - BOEING 787-8 DREAMLINER FS2004
  • ALEX DESIGN - BOEING 787-8 DREAMLINER FS2004
  • ALEX DESIGN - BOEING 787-8 DREAMLINER FS2004
  • ALEX DESIGN - BOEING 787-8 DREAMLINER FS2004
  • ALEX DESIGN - BOEING 787-8 DREAMLINER FS2004
  • ALEX DESIGN - BOEING 787-8 DREAMLINER FS2004
  • ALEX DESIGN - BOEING 787-8 DREAMLINER FS2004
  • ALEX DESIGN - BOEING 787-8 DREAMLINER FS2004
  • ALEX DESIGN - BOEING 787-8 DREAMLINER FS2004
  • ALEX DESIGN - BOEING 787-8 DREAMLINER FS2004
  • ALEX DESIGN - BOEING 787-8 DREAMLINER FS2004
В ПРОДАЖЕ С: .
02/18/20148218
ИЗДАТЕЛЬ
РАЗРАБОТЧИК

Boeing in 2004 launched the 787 Dreamliner, an all-new, superefficient airplane.
An international team of top aerospace companies builds the airplane, led by Boeing at its Everett, Wash., facility near Seattle and in North Charleston, S.C.
The 787-8 Dreamliner can carry 242 passengers up to 7,850 nautical miles (14,500 km).
In addition to bringing big-jet ranges to midsize airplanes, the 787 family provides airlines with unmatched fuel efficiency, resulting in exceptional environmental performance.
The airplane uses 20 percent less fuel than today’s similarly sized airplanes. The 787 also travels at a similar speed as today’s fastest twin-aisle airplanes, Mach 0.85. Airlines also realize more cargo revenue capacity — a 20 to 45 percent advantage over similarly sized airplanes.
Passengers also enjoy improvements on the 787 Dreamliner, from an interior environment with higher humidity to more comfort and convenience.
The key to the exceptional performance of the 787 Dreamliner is its suite of new technologies and its revolutionary design.
Composite materials make up 50 percent of the primary structure of the 787, including the fuselage and wing.
At the heart of the 787 design is a modern systems architecture that is simpler, more functional and more efficient than that of other airplanes.

Features.

  • Wing view no VC model
  • Wide screen 2D panel
  • Custom gauges
  • Custom sounds
  • Custom effects
  • Four liveries
  • Two exits animated
  • Cargo doors animated
  • Animated pushback truck
  • Refueling truck
далее...
ТЕХПОДДЕРЖКА
МЕТОД ДОСТАВКИ
ЗАГРУЗКА ФАЙЛОВ
РАЗМЕР ФАЙЛА
38MB
РЕГИСТРАЦИОННЫЙ КЛЮЧ
Регистрационные ключи выписываются после покупки. Вы сможете их найти в вашей учетной записи.
ПРИМЕЧАНИЯ
Для активации необходимо интернет-соединение. Нажмите для получения информации.
ТРЕБОВАНИЯ
FS2004
wide screen monitor
multi core CPU
1GB RAM
512MB graphics card
Клиенты купившие этот продукт также покупали
Отзывы клиентов
SAMSCENE - SHANGHAI CITY TIMES FSX P3D
yokie
I am amazed by the shanghai city center especially the bund and pudong area, also with acceptable frame rate, whether flying from or landing either the Hongqiao or Pudong airport, now with the shanghai city skyline gives a lot of immersion
WF SCENERY STUDIO - HONG KONG INTERNATIONAL AIRPORT VHHH P3D
Jiekeng
good job! I think this VHHH is better than T2G,nice fps,more detail,great!
FSXCENERY - KSYR SYRACUSE HANCOCK INTERNATIONAL AIRPORT FSX P3D
Andrew
First of all, I would like to thank the developer for the Syracuse Hancock Airport. I feel deeply connected to Syracuse and finger lakes area, so I'm glad I can make few flights to and from this airport. Howev-
er. Just like one of the pilots before me, I think, the price for the quality if too much. I know, the airport has been released some years back, but I had to spend another 5-6 hours working on afcad file (adjusting gates, adding missing airbridges, hazard lights and also apron lights, as these do not show in my sim for some reason). I visited Hancock airport in late Autumn of 2019 during snow blizzards so I was hoping, come winter, I will be able to do some nice winter flights only to discover, that the ground textures are for summer time only! So in order to do winter flights, I had to remove some of the original files and work on landclass from scratch. Not something I was expecting to do after paying for the airport. So, all in all, I took one star for afcad I had to adjust, one for land class I had to do myself and one for lack of winter textures.
PREALSOFT - HD CITIES VIENNA FSX P3D
Douglas
This is a follow up on Vienna and how the developer responded. Although a fix was attempted to make this airport right the developer ran into some issues that were beyond their control, so they did the best they could. The developer was very apologetic and made me the customer a generous gesture, they are not bad guys they just ran into an issue beyond their control. I have almost every one of their sceneries and I can tell you they are not bad. As far as Vienna goes what they offer is still much better than default, so give these guys support, they all work hard. The rating given is for the great response from Prealsoft
RICHER SIMULATIONS - CARIBSKY: TBPB 2020 FSX P3D
Bernhard
This is a very nice scenery and necessary for the Caribean to fly. Even if this is published as "P3Dv4" there is a possibility to get this into P3Dv5 with the help of the developer - update for the config-tool needed and a patch. This all is handled in less than 10 hours. Thumbs up !
HUEYTUNING - PAF890SAR FSX P3D
Simon
This is a very short review of the excellent PAF890SAR repaint. I tried the paint kit by myself, but I wasted 2 weeks of time and at least 60 hours searching for any parts and could not find them. Finally, I gave it up. Designing a white repaint is anyway the hardest task. This pay ware repaint is worlds better than all the default and freeware repaints ever made for the Milviz Huey Uh-1h. I’ve made the effort and was comparing it with MILVIZ default USAF Rescue repaint. Here are just a few details that shows the skills of the artist. 1. The yellow stripe with the registration 66890 and the two blue stripes are designed very exactly around the tail fin. On the default USAF Rescue repaint, the black stripe at the tail fin was only mirrored and looks very loveless. 2.Th-
e PAF890SAR repaint is the only repaint where the landing skids are colored in another separate black tone. 3. It is also very striking that the antenna on the roof is painted in white. 4. The yellow ribbon and every single letter from the vertical lettering has been perfectly adapted to the shape of the body, (that’s a masterpiece) 5-
. Additional maintenance levels have been incorporated with lovely details. 6.The Rescue Angel and the Huey 2 stickers are razor sharp even in highest zoom level. I’m definitely thrilled with the great implementation of this Philippine Air Force rescue helicopter. I will definitely buy the other two repaints. The price may seem a bit expensive at first glance, but hey, try the paint kit yourself and you will quickly realize this PAF890SAR repaint is a masterpiece No doubt, five stars!
PREALSOFT - HD CITIES VIENNA FSX P3D
Douglas
Buyer Beware this scenery has problems and the developer states there is "No Fix" on their end for this. The color of the land class is very washed out and the ground, (land class) loads as you fly directly in front of your plane; it is very annoying and looks and performs bad. How he is allowed to continue to sale this is beyond me!
RDS - RUSSIAN DIGITAL SIMULATIONS - UUEL KONAKOVO AIRFIELD IAHS P3D
David
Very nice airport and surroundings.I think it will need a little more lighting.
RICHER SIMULATIONS - CARIBSKY: TBPB 2020 FSX P3D
Ramon
Being a Concorde fan, Barbados is a MUST HAVE scenery. I had been using a freeware version for years, and I have to admit I was quite happy with it so, the obvious question is, is it worth paying for the update? The developer really deserves the price charged. Barbados is a small airport, but this version is incredibly rich in details. Its quality is second to none, so if you like to invest in high quality sceneries there is no doubt your money will be well invested. As I mentioned, I am Concorde fan and currently I only fly Concorde-X by FSLabs, which requires P3Dv3. At fist, the only surface shown was the runway and there was grass were taxiways and the terminal platform where supposed to be. I contacted the developer, exchanged a couple of emails and in less than 24 hours we solved the problem. In my case what solved the problem was leaving the default directory for the installation (the counter-intuiti-
ve "Prepar3D v4 Add-ons") for the Config tool to work correctly. Otherwise, the "patch" to convert the default P3Dv4 scenery into a P3Dv3 compatible did not work and the problem described before showed. Now that my problem is solved I am a super-happy pilot flying my Concorde in and out Barbados :-)
AFLOSIM - CLUJ-NAPOCA AIRPORT FSX P3D
Jan
Since i flew to Romania last year in real life i really love the country! And i really enjoy the Addons from Aflosim such as Cluj and Bucharest. Very great detail and athmosphere and a very good pricing!!!! I would love to see Timisoara soon!!
ваша страна/область проживания