• CP FLIGHT - B737 EFIS SELECTOR EFI737PRO2
  • CP FLIGHT - B737 EFIS SELECTOR EFI737PRO2
  • CP FLIGHT - B737 EFIS SELECTOR EFI737PRO2
  • CP FLIGHT - B737 EFIS SELECTOR EFI737PRO2
  • CP FLIGHT - B737 EFIS SELECTOR EFI737PRO2
  • CP FLIGHT - B737 EFIS SELECTOR EFI737PRO2
  • CP FLIGHT - B737 EFIS SELECTOR EFI737PRO2
В ПРОДАЖЕ С: .
03/17/201710813
ИЗДАТЕЛЬ
РАЗРАБОТЧИК И ОТПРАВИТЕЛЬ
МЕТКИ

EFI737PRO2 SELECTOR

The EFIS737PRO2 may be considered as an extension of the CPflight MCP737PRO1/2- MCP737EL and requires it to operate

EFISPRO2 disposes of triple concentric devices for the MINS and BARO regulation:

a) The RADIO/BARO and IN/HPA are two positions 60° index rotary switches (outer knobs) and mantain the settled position.

b) The MINS and BARO regulation (middle knobs) are real as in the aircraft; they are R/L (rise/lower) regulation kind with spring return to the center. Different rise/decrease intervention is related on how much you would like to rotate the knob (fast slow function).

A small rotation angle cause a slow rise/decrease (1 mb each 0,5 second) where a bigger rotation angle cause a fast rise/decrease (10 mb each 0,5 second). c) The RST/STD pushbuttons (inner buttons) have a separate shaft to guarantee a correct label orientation of the central pushbuttons regardless of the position of the other knobs.

EFISPRO2 also disposes of double concentric devices for the MODE and RANGE commutators:

e) The MODE and RANGE commutators (outer knobs) are respectively 4 and 8 positions 30°index.

f) the TFC and CTR pushbuttons (inner buttons) have a separate shaft to guarantee a correct label orientation of the central pushbuttons regardless of the position of the other knobs.

EFIS737PRO2 is a full scale replica of the EFIS selector located in the Boeing 737NG cockpit glareshield.

Trough a jumper EFIS737PRO2 can operate as CAPTAIN or F/O selector. EFIS737PRO2 has backlight controlled by MCP737 and support all functions.

EFIS737PRO2 is directly powered and drived by the MCP737PRO through a single 5 pole cable and like all others CPflight modules has a second socket, to allow the connection of further devices (daisy chain). The module not require any configuration or extra board to operate.

The product comes provided with 5 pole cable ( lenght 70 cm provided), parts for the mounting, bracket and wingnuts.

EFIS737PRO2 is fully compatible with Prosim737, Project Magenta, PMDG737NGX, PMDG777, iFly737, LVLD767 and Xplane (x737).
Due to the continue evolution of flight simulation field we constantly update the compatibilities. Please verify the current state of the compatibility at our CPflight website. 

далее...
ВЕБ-САЙТ
ТЕХПОДДЕРЖКА
ТРЕБОВАНИЯ
The EFIS737PRO2 may be considered as an extension of the CPflight MCP737PRO1/2- MCP737EL and requires it to operate.
Корзина
0 товаров
Баланс: EUR 0.00
Авторы и издатели
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
0...9
Отзывы клиентов
PREALSOFT - HD CITIES - CASABLANCA FSX P3D
Ken McVie
This transforms the look and feel of Casablanca airport for P3D by Prealsoft. On takeoff to the west, the city is presented in amazing detail with the port and all key landmarks modelled well. Howeve-
r, I am a bit annoyed with Prealsoft for bringing out a combined Casablanca airport & city package not long after I purchased the airport on its own. Had I waited a few more weeks, I could have purchased the combined package more cheaply than buying the two separately (which is what I did). So, ths alone has put me off buying anymore Prealsoft airport products in the future.
CARENADO - DO228 100 HD SERIES FSX P3D
thomas holzinger
The model and textures are simply great, as well the immersion in the VC and in the virtual cabin. The engine sound is ok, even the start-up sequence seems too short. The flight dynamics seems reasonable. The model has the Carenado usual animations which looks great. Unfortunately there is a major bug in regard to the stab trim indication which is reversed when the instrument lights are switched on.
JUSTSIM - STUTTGART AIRPORT - P3D V4.4+
Keino Furbert-Jacobs
Nothing less than Amazing!!!!!!!!-
! Need to say nothing more.
TROPICALSIM - TIRANA LATI 2020 FSX P3D
mike georgiou
Amazing Scenery, with great performance !! A must for All simmers. Very Well done ! I Only wish an Update to Match FTX Global Color's !!
ANTS AIRPLANES - TIGER MOTH PRO FSX P3D
Mathias Postema
The best tiger Moth on the market. I love it! Matthias
VIRTUALCOL - EMBRAER E190-195 REGIONAL PACK FSX P3D
Alec Main
Very impressed with this product! VirtualCol continues to amaze me with their progress of each product they release! This is by far, significantly better than their previous versions of their E-Jets v1 and v2. Textures look great inside and out, implementing their features of separated landing lights and windshield wiper animations as in previous products released in the past years. I've been keeping track of this product for over half a year now, and been checking up on it daily to see it's progress. Happy to say, I am not disappointed at the release. $21 USD for this aircraft or $12 if you've previously purchased the old version of this series, not a bad price at all. The only thing I found odd, was while the product was in development, it mentioned an Embraer Lineage 1000 to be released as well, but it wasn't included in the final product; shame that the corporate/busin-
ess version of this plane never made it and was scrapped at the last minute. Still a very enjoyable plane however and like with every VirtualCol product, it's easy on the frames! Flying into busy areas such as Chicago, New York, Los Angeles, etc is much smoother with VirtualCol planes, and that has always been a staple to their products. Al-
so wanted to point out that this is the first VirtualCol plane that has wingflex! Very neat feature added and the first for VirtualCol products! Looking forward to the future releases of their products as always; and can't wait for the new innovations and features they'll add next to their upcoming products!
PILOT'S FSG - LEAL - ALICANTE AIRPORT P3D4
Lieuwe Bleeker
this scenery is excellent, to have a look inside the terminal and you see walking people! The sound at the apron, and more details a great job!
FSPS - P3DV4 BOOSTER LIVE 2018
Christoff du Plessis
I can say that it does work. Just not much as a "boost" as some people expecting, but it helps to allocate resources correctly under heavy load conditions. For example at a detailed airport or city set the slider to 100% and your frames will be higher than without the tool. When you're cruising over the countryside or when you're out sightseeing, set it to 60 percent or so and you wont experience blurred terrain texture tiles.
SIM SKUNK WORKS - MCDONNEL DOUGLAS AV8B II HARRIER FOR P3D V4.X
Boris Guerrero Reyes
The aircraft is great. Love the graphics work and and the VTOL module works perfect in P3D V4.5 but it looks like the the Tacpack functions do not work. Did several bombing campaigns using FSX@war but when the bombs impact their targets it does not destroy them. I also noticed that when the AIM-9 AA missile hits an aircraft it causes damage but it does not shoot it down like other Tacpack aircraft do! I reported several glitches to the SSW team and they responded back but they gave me the incorrect fix advice. Other than that I am completely satisfied with the product. The aircraft flies great and navigation is good. TACAN also does not work even if you follow the instruction in the PDF manual.
JETSTREAM DESIGNS - MILANO LINATE FSX P3D
David Watson
What a smashing airport. Make sure your AV etc is turned off prior to installation. Do a walk-round with the Trike, in slew mode, or with BOB to get a good look. Get the update and download it from JetStreams' website, revised AFCAD etc, and then you are good to go. This is one addon airport that I highly recommend, plus it works just as well in FSX Steam Edition without any glitches.
ваша страна/область проживания