• FI - GSA10 - INPUT/OUTPUT MODULE USB-VERSION
  • FI - GSA10 - INPUT/OUTPUT MODULE USB-VERSION
  • FI - GSA10 - INPUT/OUTPUT MODULE USB-VERSION
  • FI - GSA10 - INPUT/OUTPUT MODULE USB-VERSION
В ПРОДАЖЕ С: .
09/23/20083195
ИЗДАТЕЛЬ
РАЗРАБОТЧИК И ОТПРАВИТЕЛЬ

The Input/output module (I/O) is an additional module that allows the user to control inputs and outputs. The card can accept 48 digital inputs (for e.g. control switches), 32+2 outputs to control LED’s and 8 analogue inputs to connect potentiometers.

No need to buy three different cards to have switches, led’s or throttle control. You will find all you need on this one card.

The I/O module is connected directly to the computer with USB and is recognized by the software as a separate module. Hence the speed is very fast. To set it up, you can first connect the switches/leds/ potmeters, run the software and assign a function to each of them.

How does it work 

For switches, you can connect normal on/off switches, momentary switches or rotary switches. In case of rotary each position can be assigned separately which e.g. makes it simple to create a more position flaps control lever.

LED’s can be standard LED’s with maximum 15 mA current. Most LEDs (if working at 2Volt or lower) can be connected in series giving you more light and compatibility with many standard indicator housings. LEDs are grouped in two groups of 16 LEDs. Two extra LEDs can be used as “master” LEDs that will light up when one of the 32 LEDs is switched on. Per LED can be selected whether or which of the two Masters must be lit.

Potentiometers are in the range of 5-15 Kilo-ohm and can be used to drive throttle, speedbrake, flap position, etc. In general linear potentiometers are used and each analogue input hat a resolution of 1024 positions. A definable zero cross point enables the use of potentiometers for positive and negative values, like throttle forward/reverse.

NEW - rotary encoders can also be used in the USB version. They connect to the normal digital input connectors. The software recognized the direction of the mrotation and acts like a switch. assign left and right direction to the switch or a switch to the pushbutton if present on the encoder.

Ease of use 

The card is very easy to use and to setup. A very user friendly test and card-layout function is integrated in the Control Program. No programming knowledge is required.

The I/O module gets its function from a list that can be modified. Every offset from FS or FSUIPC can be added, but keystrokes can be configured as well.
All values that are used for gauges (or offsets that can be used to create gauges) can drive the LED’s as the ON/OFF cross point (and either ON or OFF below that cross point) are configurable.
 

 Download the I/O manual
(USB version)

 

далее...
ТЕХПОДДЕРЖКА
ТРЕБОВАНИЯ
USB
Клиенты купившие этот продукт также покупали
Отзывы клиентов
SAMSCENE - SHANGHAI CITY TIMES FSX P3D
Andreas
Excellent scenery with lots of landmark buildings reproduced. Great performance under P3DV5. Higly competent and responsive support by developers. -
If I would wish one thing then possibly all the li-Long areas could be provided with 3D buildings rater than Photoscenery. -
But who knows, possibly developers are already working on that....
DIGITAL DESIGN - TENERIFE V2 P3D5
Daniel
A really beautiful scenery which makes flying in and out of Tenerife South a real joy. The colouring of the terrain is really nice and the autogen around the airport with many hand placed buildings is superb. The addition of the sloped runway and also slope of the taxiways really adds a new level of immersion to the sim and just brings the airport to life. I deduct one star just because the autogen around the airport is beautifully done, but the autogen for the rest of the island is non-existent and this is a real shame. Overa-
ll I recommend the scenery!
SAMSCENE - SHANGHAI CITY TIMES FSX P3D
yokie
I am amazed by the shanghai city center especially the bund and pudong area, also with acceptable frame rate, whether flying from or landing either the Hongqiao or Pudong airport, now with the shanghai city skyline gives a lot of immersion
WF SCENERY STUDIO - HONG KONG INTERNATIONAL AIRPORT VHHH P3D
Jiekeng
good job! I think this VHHH is better than T2G,nice fps,more detail,great!
FSXCENERY - KSYR SYRACUSE HANCOCK INTERNATIONAL AIRPORT FSX P3D
Andrew
First of all, I would like to thank the developer for the Syracuse Hancock Airport. I feel deeply connected to Syracuse and finger lakes area, so I'm glad I can make few flights to and from this airport. Howev-
er. Just like one of the pilots before me, I think, the price for the quality if too much. I know, the airport has been released some years back, but I had to spend another 5-6 hours working on afcad file (adjusting gates, adding missing airbridges, hazard lights and also apron lights, as these do not show in my sim for some reason). I visited Hancock airport in late Autumn of 2019 during snow blizzards so I was hoping, come winter, I will be able to do some nice winter flights only to discover, that the ground textures are for summer time only! So in order to do winter flights, I had to remove some of the original files and work on landclass from scratch. Not something I was expecting to do after paying for the airport. So, all in all, I took one star for afcad I had to adjust, one for land class I had to do myself and one for lack of winter textures.
PREALSOFT - HD CITIES VIENNA FSX P3D
Douglas
This is a follow up on Vienna and how the developer responded. Although a fix was attempted to make this airport right the developer ran into some issues that were beyond their control, so they did the best they could. The developer was very apologetic and made me the customer a generous gesture, they are not bad guys they just ran into an issue beyond their control. I have almost every one of their sceneries and I can tell you they are not bad. As far as Vienna goes what they offer is still much better than default, so give these guys support, they all work hard. The rating given is for the great response from Prealsoft
RICHER SIMULATIONS - CARIBSKY: TBPB 2020 FSX P3D
Bernhard
This is a very nice scenery and necessary for the Caribean to fly. Even if this is published as "P3Dv4" there is a possibility to get this into P3Dv5 with the help of the developer - update for the config-tool needed and a patch. This all is handled in less than 10 hours. Thumbs up !
HUEYTUNING - PAF890SAR FSX P3D
Simon
This is a very short review of the excellent PAF890SAR repaint. I tried the paint kit by myself, but I wasted 2 weeks of time and at least 60 hours searching for any parts and could not find them. Finally, I gave it up. Designing a white repaint is anyway the hardest task. This pay ware repaint is worlds better than all the default and freeware repaints ever made for the Milviz Huey Uh-1h. I’ve made the effort and was comparing it with MILVIZ default USAF Rescue repaint. Here are just a few details that shows the skills of the artist. 1. The yellow stripe with the registration 66890 and the two blue stripes are designed very exactly around the tail fin. On the default USAF Rescue repaint, the black stripe at the tail fin was only mirrored and looks very loveless. 2.Th-
e PAF890SAR repaint is the only repaint where the landing skids are colored in another separate black tone. 3. It is also very striking that the antenna on the roof is painted in white. 4. The yellow ribbon and every single letter from the vertical lettering has been perfectly adapted to the shape of the body, (that’s a masterpiece) 5-
. Additional maintenance levels have been incorporated with lovely details. 6.The Rescue Angel and the Huey 2 stickers are razor sharp even in highest zoom level. I’m definitely thrilled with the great implementation of this Philippine Air Force rescue helicopter. I will definitely buy the other two repaints. The price may seem a bit expensive at first glance, but hey, try the paint kit yourself and you will quickly realize this PAF890SAR repaint is a masterpiece No doubt, five stars!
PREALSOFT - HD CITIES VIENNA FSX P3D
Douglas
Buyer Beware this scenery has problems and the developer states there is "No Fix" on their end for this. The color of the land class is very washed out and the ground, (land class) loads as you fly directly in front of your plane; it is very annoying and looks and performs bad. How he is allowed to continue to sale this is beyond me!
RDS - RUSSIAN DIGITAL SIMULATIONS - UUEL KONAKOVO AIRFIELD IAHS P3D
David
Very nice airport and surroundings.I think it will need a little more lighting.
ваша страна/область проживания