JUSTFLIGHT - JUSTTRAINS - THREE COUNTRY CORNER ROUTE

JUSTTRAINS - THREE COUNTRY CORNER ROUTE

JUSTFLIGHT
EUR 20.97
$
£
¥

Drive 130km (80 miles) of track through Austria, Germany and Switzerland, passing through 40 detailed stations!

A tour de force in route design, with stunning scenery, country-specific signalling systems and custom objects throughout, the Three Country Corner Route is probably the most authentic, realistic and detailed route for Train Simulator to date!

The Three Country Corner route lies at the heart of Europe and covers three countries. It starts at Lake Constance in Germany on the Island of Lindau, crosses over to the mainland on a railway dam, and then follows the shores of Lake Constance to the city of Bregenz in Austria.

From there you have two choices - either continue on the main line or take a branch line into Switzerland. This branch line crosses the River Rhine, which forms the border between Austria and Switzerland, and continues on to the city of Rorschach where the line terminates.

The main line starts its slow climb through the valleys to the city of Bludenz, surrounded by the often snow-capped mountains of the Alps, then becomes a single track mountain pass (Arlberg Pass) that winds its way through the Alps. When the tracks reach the very top of the pass at St. Anton, the route finishes.

If you'd like to take a look at the 50-page manual, you can download it here, and don't forget to take a look at the videos about the signalling systems along the route!

FEATURES
  • 130km (80 miles) of track covering three countries (Austria, Germany and  Switzerland)
  • 40 detailed stations
  • Four different and highly realistic signalling systems
  • Specially designed and accurate country-specific gantry systems
  • Custom signs along the route (speed signs, hectometer signs, warning signs etc.)
  • Detailed and accurate country-specific station assets (platforms, ticket machines, signs, platform roofs etc.)
  • All major features such as tracks, main roads, rivers, bridges and tunnels are accurately placed
  • Specially designed tracks replicate the real-world tracks along the route
  • Newly created track rule including realistic super-elevation
  • Many custom buildings along the route
  • Route-specific assets such as noise reduction walls and snow-retaining walls
  • Faithful re-creation of the Arlberg Pass line including all the rapid gradient changes
  • Detailed night lighting taking advantage of TSX technology
  • PZB speed monitoring system (if a warning signal indicates that the following main signal says 'Proceed at 60kph' then the PZB will check whether the train driver is actually slowing down. If not, it will activate an emergency brake. It will also activate an emergency brake if the driver runs a red light or approaches a red light too fast)
  • Includes 10 Standard scenarios and 5 Free Roam scenarios - available in English or German, depending on your language settings
  • Route is Quick Drive enabled
STATIONS
 
Lindau (Germany) - Lauterach (Austria)
  • Lindau
  • Lindau - Reutin
  • Lochau-Hoerbranz
  • Bregenz Hafen
  • Bregenz
  • Riedenburg
  • Lauterach
Lauterach (Austria) - Rorschach (Switzerland)
  • Lauterach
  • Hard (closed)
  • Lustenau
  • St Margrethen
  • Rheineck
  • Staad
  • Rorschach
Lauterach (Austria) - St. Anton (Austria)
  • Wolfurt
  • Schwarzach
  • Haselstauden
  • Dornbirn
  • Schoren
  • Hatlerdorf
  • Hohenems
  • Altach
  • Goetzis
  • Klaus
  • Sulz
  • Rankweil
  • Feldkirch - Amberg
  • Feldkirch
  • Frastanz
  • Schlins
  • Nenzing
  • Ludesch
  • Nueziders
  • Bluden
    (Start of Arlbergpass)
  • Bings (closed)
  • Braz (closed)
  • Hintergasse (closed)
  • Dalaas (closed)
  • Wald (closed)
  • Langen
  • St. Anton
SCENARIOS
 
The scenarios are available in English or German, depending on your language settings.


Scenario 1: Route Introduction – Part 1

 

It’s your first day on the Three Country Corner Route and you are joined by an experienced driver who will talk about items of interest on the route and point out some useful information regarding the signals. Take a Regional Express train (REX) from Lindau to Bludenz.

 
This is an easy scenario with lots of information and useful tips about the route.
 
Length: 50 minutes
Locomotive: BR101

Scenario 2: Route Introduction – Part 2
 
After a short break in Bludenz, you take over the Eurocity train from Zurich to Vienna and drive it up the mountain pass.
 
This second introductory scenario is very easy and will provide you with plenty of background information about the mountain pass.
 
Length: 40 minutes
Locomotive: BR101

Scenario 3: Night Train Through The Valleys
 
It’s a nice warm summer’s night and your job is to take an Intercity train from Bludenz to Lindau.
 
This is an easy scenario which highlights the night lighting along the route.
 
Length: 45 minutes
Locomotive: BR101

Scenario 4: From Port to Port
 
It’s 2004 and the Lake Constance Shipping Company is celebrating its 120 year anniversary. Thousands of spectators are flocking to the lake and the railways are running special trains between the ports. Take control of one of these trains from
Lindau to Rorschach-Hafen.
 
This is a medium difficulty scenario with a diesel locomotive. Regular traffic has the right of way so there are some red signals along the route. Hundreds of additional people are placed along the route, including some spotters.
 
Length: 35 minutes
Locomotive: BRV200

Scenario 5: Down We Go

It’s a cold winter’s day and a heavy freight train has arrived at the top of the pass.
Drive it all the way down to Bludenz and then on to the freight station at Wolfurt.
 
A medium difficulty scenario with a very long and heavy freight train restricted to
110kph. Keep an eye out for other traffic and slippery tracks.

Length: 70 minutes
Locomotive: BR143

Scenario 6: No Business like Snow Business

Winter has started in the Alps and the snow has arrived. Take a freight train from
Wolfurt to Rorschach where a Swiss colleague will take over.
 
Medium difficulty scenario with some signals slowing down the train. The signalling in Switzerland shows some of the more complex indications.
 
Length: 25 minutes
Locomotive: BR143

Scenario 7: There and Back
 
Some wagons need to be picked up from the quarry in Hohenems. Jump into a loco,pick them up and bring them to Wolfurt.
 
This is a medium difficulty scenario with a diesel shunting loco. First you need to
drive to the quarry to pick up some wagons, then bring them to a siding at the freight station in Wolfurt. You’ll encounter many red signals on your route as normal traffic has the right of way.
 
Length: 30 minutes
Locomotive: BR294

Scenario 8: REX Feldkirch-Bregenz

It’s a lovely evening and you are to drive a REX from Feldkirch to Bregenz. Everything looks fine – but expect the unexpected!
 
A hard scenario with some challenges along the way as you try to keep to a strict
timetable.
 
Length: 35 minutes
Locomotive: BR101

Scenario 9: The Three Country Hop

It’s a busy Monday morning and you are about to take charge of a stopping passenger train from Switzerland to Germany via Austria.
 
This is a very hard scenario with challenges coming from a tight timetable and heavy traffic. There are also some signals which will slow your train down as well as EC and IC train traffic which has the right of way. You will have to be familiar with all four signalling systems along the route as you will encounter all of them in this scenario.
 
Length: 40 minutes
Locomotive: BR101

Scenario 10: Stopping Service to Feldkirch

It’s a grey and rainy day in the valleys. Take over a passenger stopping service from Lindau to Feldkirch and try to stick to a very tight timetable.

A very hard scenario with lots of stops along the way. You need to keep to a very
tight timetable and will have plenty of traffic to contend with along the route.

Length: 55 minutes
Locomotive: BR101
 
FREE ROAM SCENARIOS
 
Five Free Roam scenarios are also included.
lire plus
FICHIER
644MB
TÉLÉCHARGER DEMO
NOTES
An active internet connection is required for activation.
NECESSITE
  • Train Simulator 2016
    Important! If you do not already have the European Loco & Asset Pack and the US Loco & Asset Pack installed (both available to purchase from Dovetail Games via Steam) then you will need them both to allow the route to display correctly. Please note that one or both of those packs may be included in other products purchased from Dovetail games via Steam.
  • 3.0GHz PC or any Dual Core
  • Windows 8 / 7 / XP / Vista
  • 512Mb RAM (1Gb for Windows 8 / 7 / Vista)
  • 256Mb video card with Pixel shader 2.0 (AGP/PCE only)
  • Direct X 9.0c compatible sound card
  • 1.3GB hard drive space
Commentaires client
ROLAND LABORIE - CL415-V2 P3DV4
pierre
Magnifique avion, malheureusement j'ai beau suivre précisément la check list je n'arrive pas a démarrer le moteur droit.( obliger de démarrer un autre avion puis recharger le cl415) je n'arrive pas non plus à écoper plus de 2000lbs. J'espère que je trouverais rapidement une solution à ces deux soucis.
FS2CREW - PUSHBACK EXPRESS MSFS
Jean-Charles
Excellent produit qui fonctionne parfaitement avec le Fenix A320 et les autres modèles de MSFS A32NX. Mode Distance ou mode Rudder Control avec l'avantage de tirer ou de pousser l'avion et de régler la vitesse avec le joystick en utilisant les élévateurs. -
Excellent product which works perfectly in two mode Rudder control push or pull with speed control with elevators or Distance mode. We can use it with every planes of MSFS included FBW A32NX and A320 Fenix since the last update 2.4.6 and 2.4.7 Better if documentation in futur could be updated with the new version. Do not forget to modify yours parameters inside the wheel when you launch it. Thanks FS2crew
FS2CREW - PUSHBACK EXPRESS MSFS
Jean-Charles
Excellent produit qui fonctionne parfaitement avec le Fenix A320 et les autres modèles de MSFS A32NX. Mode Distance ou mode Rudder Control avec l'avantage de tirer ou de pousser l'avion et de régler la vitesse avec le joystick en utilisant les élévateurs. -
Excellent product which works perfectly in two mode Rudder control push or pull with speed control with elevators or Distance mode. We can use it with every planes of MSFS included FBW A32NX and A320 Fenix since the last update 2.4.6 and 2.4.7 Better if documentation in futur could be updated with the new version. Do not forget to modify you parameter inside the wheel. Thanks FS2crew
ROLAND LABORIE - CL415 MSFS
jacques
CL 415 .Avion certainement issu de FSX. Intéressant , sauf pour le son moteur qui ne correspond pasà la réalité (Pratt & Whitney Canada PW100). Voir DHC 7 ou 8 et ATR. Une mise à jour du fichier Sound serai la bienvenue pour une bonne immersion sonore. Cordia-
lement merci -
Jacques
DIGITAL DESIGN - LYON MSFS
Lionel
MA-GNI-FI-QUE ! Superbe scène, très détaillée et surtout réaliste ! Jetways amortis lorsqu'ils se mettent en place. Véhicules de piste bien reconnaissables de marques françaises, les panneaux et signalétique au sol sans défaut. Aucun regret de l'avoir achetée !
SUPERSONIC - CARCASSONNE SALVAZA AIRPORT MSFS
Michel
beau travail pour ce petit aéroport très bien détaillé j'aime beaucoup ..
HANGAR STUDIOS 713 - CAMAIR 480 TWIN NAVION MSFS
Michel
plutôt contente de cet avion j'aime son look rétro, certes l'intérieur mériterait d'être un peu moins rustique, bien que tous les instruments soient là et fonctionnent parfaitement ( avec la version rechargée ce matin). le PA très simple a utiliser fonctionne très bien. peu-être une amélioration concernant le son qui semble pauvre pour un bimoteur des années 50, et des hachures de son par moments qui mériteraient d'être fixées. en conclusion bien agréable et maniable pour faire un vol tranquille de temps en temps (sans prises de tête les diverses procédures pré-vol, vol, et après-vol..
ROLAND LABORIE - CL415 MSFS
Demouge
En at de mise a jour tres belle avion (prévoir le mapage du largage d'eau) agréabl-
e en vol et a l'écopage le son des moteures son bon
DIGITAL DESIGN - LYON MSFS
RODRIGUEZ
Très belle scène de Lyon Saint Exupéry qui modélise vraiment bien la plate-forme aéroportuaire lyonnaise. Il ne manque pas grand chose pour que ce soit parfait. Le concepteur est très réactif. Il a déjà fait une mise à jour pour les avions du trafic AI aillent aux bons terminaux.
DIGITAL DESIGN - LYON MSFS
Pascal
Jolie Aéroport qu'on attendait depuis longtemps...Seu-
lement en seuil de piste de la 35L une côte indésirable est apparue ce qui gène une entrée de piste en douceur..... de plus l'avion fixe d'entrainement sur la gauche de la 35L est dédoublé avec celui de MFS 2020 par défaut. J'espère qu'une correction arrivera vite..
Votre pays/région de résidence
Newsletter - Restez toujours actualisé!

The New SIMMARKET App

Explore an endless world !

Download App