• POLABS - POKEYS57E TERMINALS
  • POLABS - POKEYS57E TERMINALS
  • POLABS - POKEYS57E TERMINALS
В ПРОДАЖЕ С: .
09/30/20159667
ИЗДАТЕЛЬ
РАЗРАБОТЧИК И ОТПРАВИТЕЛЬ

PoKeys57E is an easy-to-use Ethernet device that combines a lot of inputs and outputs, and does not require complex programming knowledge. Pokeys57 provides 55 digital I/O (5V tolerant), 7 analog inputs (12-bit). All the I/O are controlled by the provided software which allows either to use the graphical user interface or advanced console type interface. The settings can be stored on the device, so no special software is needed on target system. PoKeys57 can be used as industrial or CNC control or data acquisition board. PoKeys is available with (PoKeys57ET) or without (PoKeys57EN) screw terminals.

Features:

  • Ethernet 10/100 with DHCP client or fixed IP support
  • TCP connection with device
  • 55 digital inputs with pull-up resistors
  • 55 software controlled digital outputs
  • 7 analog inputs (12-bit) with adjustable low-pass filtering support
  • Up to 26 encoder pair inputs (3 high-speed encoder inputs, 1 ultra high speed encoder input)
  • 3-axis 25 kHz or 8-axis 125 kHz Pulse engine
  • Digital counters on specific digital input pins
  • Up to 16x8 matrix keyboard
  • Two 8x8 matrix LED display support
  • Up to 6 high-speed fully configurable PWM outputs support (25 MHz PWM timer)
  • HD44780-based character LCD support (up to 4x20 characters)
  • PoExtBus support for adding up to 10 external shift registers = 80 aditional outputs
  • PoNET devices support (48-key CNC keyboard, etc...)
  • Modbus TCP support (access to digital IO, analog inputs, encoders’ counters, digital counters values, PWM outputs, LCD display, LED matrix display, PoExtBus devices, matrix keyboard status)
  • Support for up to 10 sensors on I2C bus, up to 10 sensors on 1-wire bus and up to 7 analog sensors
  • Web interface with newly designed dashboard and I/O status display with multiple user accounts
  • Support for communication with devices on I2C and 1-wire buses
  • Support for Connection signal output
  • Intuitive and user-friendly software
  • Third-party support via communication DLL library and extensive protocol specification document that allows porting to other systems
  • Plugin for Mach3 and Mach4 software, PoKeys as 4-axis external motion controller or general purpose, highly cusomizable Human Machine Interface
  • PoBlocks graphical programming PLC software

Xively web services support (version 3.0.57 and on)

PoKeys57E automatically uploades the selected sensor values to the Xively web services, making them accessible from all over the world - look at our test feed of the greenhouse temperature and humidity sensor SHT21 and soil humidity, all connected to PoKeys57E: https://xively.com/feeds/136873450. For more details on using Xively web services with PoKeys57E devices, please look at this tutorial: http://www.mypokeys.com/?p=340.

Support for X-Plane flight simulator

See more here: http://forums.x-plane.org/index.php?showtopic=62459

Support for PoBlocks graphical programming software

Software

PoKeys software package contains

  • PoKeys configuration software
  • PoKeys firmware
  • PoKeys communication library
  • Manual
  • PoKeys USB driver (for fast interface)
  • PoBlocks graphical programming environment
  • Programming examples for C++, C#, VB.NET, Delphi

Cross-platform PoKeys communication library is available at bitbucket.org: https://bitbucket.org/mbosnak/pokeyslib

далее...
ВЕБ-САЙТ
ТАКЖЕ ДОСТУПНЫ
ТРЕБОВАНИЯ
  • Ethernet connection between host computer and PoKeys56E device
  • 5V DC power supply with 400 mA. If any additional peripheral is connected to PoKeys57E, use appropriately more powerful power supply.
  • Included software requires Windows 2000/XP/Vista/Windows 7/8/10 with .NET framework 3.5 installed (ONLY FOR SYSTEMS WHERE THE DEVICES WILL BE CONFIGURED, TARGET SYSTEM NEEDS NO SOFTWARE INSTALLATION FOR THE DEVICE TO OPERATE AS A STANDARD NETWORK DEVICE)
Клиенты купившие этот продукт также покупали
Отзывы клиентов
SAMSCENE - SHANGHAI CITY TIMES FSX P3D
Andreas
Excellent scenery with lots of landmark buildings reproduced. Great performance under P3DV5. Higly competent and responsive support by developers. -
If I would wish one thing then possibly all the li-Long areas could be provided with 3D buildings rater than Photoscenery. -
But who knows, possibly developers are already working on that....
DIGITAL DESIGN - TENERIFE V2 P3D5
Daniel
A really beautiful scenery which makes flying in and out of Tenerife South a real joy. The colouring of the terrain is really nice and the autogen around the airport with many hand placed buildings is superb. The addition of the sloped runway and also slope of the taxiways really adds a new level of immersion to the sim and just brings the airport to life. I deduct one star just because the autogen around the airport is beautifully done, but the autogen for the rest of the island is non-existent and this is a real shame. Overa-
ll I recommend the scenery!
SAMSCENE - SHANGHAI CITY TIMES FSX P3D
yokie
I am amazed by the shanghai city center especially the bund and pudong area, also with acceptable frame rate, whether flying from or landing either the Hongqiao or Pudong airport, now with the shanghai city skyline gives a lot of immersion
WF SCENERY STUDIO - HONG KONG INTERNATIONAL AIRPORT VHHH P3D
Jiekeng
good job! I think this VHHH is better than T2G,nice fps,more detail,great!
FSXCENERY - KSYR SYRACUSE HANCOCK INTERNATIONAL AIRPORT FSX P3D
Andrew
First of all, I would like to thank the developer for the Syracuse Hancock Airport. I feel deeply connected to Syracuse and finger lakes area, so I'm glad I can make few flights to and from this airport. Howev-
er. Just like one of the pilots before me, I think, the price for the quality if too much. I know, the airport has been released some years back, but I had to spend another 5-6 hours working on afcad file (adjusting gates, adding missing airbridges, hazard lights and also apron lights, as these do not show in my sim for some reason). I visited Hancock airport in late Autumn of 2019 during snow blizzards so I was hoping, come winter, I will be able to do some nice winter flights only to discover, that the ground textures are for summer time only! So in order to do winter flights, I had to remove some of the original files and work on landclass from scratch. Not something I was expecting to do after paying for the airport. So, all in all, I took one star for afcad I had to adjust, one for land class I had to do myself and one for lack of winter textures.
PREALSOFT - HD CITIES VIENNA FSX P3D
Douglas
This is a follow up on Vienna and how the developer responded. Although a fix was attempted to make this airport right the developer ran into some issues that were beyond their control, so they did the best they could. The developer was very apologetic and made me the customer a generous gesture, they are not bad guys they just ran into an issue beyond their control. I have almost every one of their sceneries and I can tell you they are not bad. As far as Vienna goes what they offer is still much better than default, so give these guys support, they all work hard. The rating given is for the great response from Prealsoft
RICHER SIMULATIONS - CARIBSKY: TBPB 2020 FSX P3D
Bernhard
This is a very nice scenery and necessary for the Caribean to fly. Even if this is published as "P3Dv4" there is a possibility to get this into P3Dv5 with the help of the developer - update for the config-tool needed and a patch. This all is handled in less than 10 hours. Thumbs up !
HUEYTUNING - PAF890SAR FSX P3D
Simon
This is a very short review of the excellent PAF890SAR repaint. I tried the paint kit by myself, but I wasted 2 weeks of time and at least 60 hours searching for any parts and could not find them. Finally, I gave it up. Designing a white repaint is anyway the hardest task. This pay ware repaint is worlds better than all the default and freeware repaints ever made for the Milviz Huey Uh-1h. I’ve made the effort and was comparing it with MILVIZ default USAF Rescue repaint. Here are just a few details that shows the skills of the artist. 1. The yellow stripe with the registration 66890 and the two blue stripes are designed very exactly around the tail fin. On the default USAF Rescue repaint, the black stripe at the tail fin was only mirrored and looks very loveless. 2.Th-
e PAF890SAR repaint is the only repaint where the landing skids are colored in another separate black tone. 3. It is also very striking that the antenna on the roof is painted in white. 4. The yellow ribbon and every single letter from the vertical lettering has been perfectly adapted to the shape of the body, (that’s a masterpiece) 5-
. Additional maintenance levels have been incorporated with lovely details. 6.The Rescue Angel and the Huey 2 stickers are razor sharp even in highest zoom level. I’m definitely thrilled with the great implementation of this Philippine Air Force rescue helicopter. I will definitely buy the other two repaints. The price may seem a bit expensive at first glance, but hey, try the paint kit yourself and you will quickly realize this PAF890SAR repaint is a masterpiece No doubt, five stars!
PREALSOFT - HD CITIES VIENNA FSX P3D
Douglas
Buyer Beware this scenery has problems and the developer states there is "No Fix" on their end for this. The color of the land class is very washed out and the ground, (land class) loads as you fly directly in front of your plane; it is very annoying and looks and performs bad. How he is allowed to continue to sale this is beyond me!
RDS - RUSSIAN DIGITAL SIMULATIONS - UUEL KONAKOVO AIRFIELD IAHS P3D
David
Very nice airport and surroundings.I think it will need a little more lighting.
ваша страна/область проживания