• POLABS - POKEYS57E TERMINALS
  • POLABS - POKEYS57E TERMINALS
  • POLABS - POKEYS57E TERMINALS
上架日期: .
09/30/20159667
出版商
销售及配送人

PoKeys57E is an easy-to-use Ethernet device that combines a lot of inputs and outputs, and does not require complex programming knowledge. Pokeys57 provides 55 digital I/O (5V tolerant), 7 analog inputs (12-bit). All the I/O are controlled by the provided software which allows either to use the graphical user interface or advanced console type interface. The settings can be stored on the device, so no special software is needed on target system. PoKeys57 can be used as industrial or CNC control or data acquisition board. PoKeys is available with (PoKeys57ET) or without (PoKeys57EN) screw terminals.

Features:

  • Ethernet 10/100 with DHCP client or fixed IP support
  • TCP connection with device
  • 55 digital inputs with pull-up resistors
  • 55 software controlled digital outputs
  • 7 analog inputs (12-bit) with adjustable low-pass filtering support
  • Up to 26 encoder pair inputs (3 high-speed encoder inputs, 1 ultra high speed encoder input)
  • 3-axis 25 kHz or 8-axis 125 kHz Pulse engine
  • Digital counters on specific digital input pins
  • Up to 16x8 matrix keyboard
  • Two 8x8 matrix LED display support
  • Up to 6 high-speed fully configurable PWM outputs support (25 MHz PWM timer)
  • HD44780-based character LCD support (up to 4x20 characters)
  • PoExtBus support for adding up to 10 external shift registers = 80 aditional outputs
  • PoNET devices support (48-key CNC keyboard, etc...)
  • Modbus TCP support (access to digital IO, analog inputs, encoders’ counters, digital counters values, PWM outputs, LCD display, LED matrix display, PoExtBus devices, matrix keyboard status)
  • Support for up to 10 sensors on I2C bus, up to 10 sensors on 1-wire bus and up to 7 analog sensors
  • Web interface with newly designed dashboard and I/O status display with multiple user accounts
  • Support for communication with devices on I2C and 1-wire buses
  • Support for Connection signal output
  • Intuitive and user-friendly software
  • Third-party support via communication DLL library and extensive protocol specification document that allows porting to other systems
  • Plugin for Mach3 and Mach4 software, PoKeys as 4-axis external motion controller or general purpose, highly cusomizable Human Machine Interface
  • PoBlocks graphical programming PLC software

Xively web services support (version 3.0.57 and on)

PoKeys57E automatically uploades the selected sensor values to the Xively web services, making them accessible from all over the world - look at our test feed of the greenhouse temperature and humidity sensor SHT21 and soil humidity, all connected to PoKeys57E: https://xively.com/feeds/136873450. For more details on using Xively web services with PoKeys57E devices, please look at this tutorial: http://www.mypokeys.com/?p=340.

Support for X-Plane flight simulator

See more here: http://forums.x-plane.org/index.php?showtopic=62459

Support for PoBlocks graphical programming software

Software

PoKeys software package contains

  • PoKeys configuration software
  • PoKeys firmware
  • PoKeys communication library
  • Manual
  • PoKeys USB driver (for fast interface)
  • PoBlocks graphical programming environment
  • Programming examples for C++, C#, VB.NET, Delphi

Cross-platform PoKeys communication library is available at bitbucket.org: https://bitbucket.org/mbosnak/pokeyslib

浏览详情
官方主页
使用需求
  • Ethernet connection between host computer and PoKeys56E device
  • 5V DC power supply with 400 mA. If any additional peripheral is connected to PoKeys57E, use appropriately more powerful power supply.
  • Included software requires Windows 2000/XP/Vista/Windows 7/8/10 with .NET framework 3.5 installed (ONLY FOR SYSTEMS WHERE THE DEVICES WILL BE CONFIGURED, TARGET SYSTEM NEEDS NO SOFTWARE INSTALLATION FOR THE DEVICE TO OPERATE AS A STANDARD NETWORK DEVICE)
购买了该商品的顾客还买了
客户评价
FSXCENERY - KSYR SYRACUSE HANCOCK INTERNATIONAL AIRPORT FSX P3D
Andrew
First of all, I would like to thank the developer for the Syracuse Hancock Airport. I feel deeply connected to Syracuse and finger lakes area, so I'm glad I can make few flights to and from this airport. Howev-
er. Just like one of the pilots before me, I think, the price for the quality if too much. I know, the airport has been released some years back, but I had to spend another 5-6 hours working on afcad file (adjusting gates, adding missing airbridges, hazard lights and also apron lights, as these do not show in my sim for some reason). I visited Hancock airport in late Autumn of 2019 during snow blizzards so I was hoping, come winter, I will be able to do some nice winter flights only to discover, that the ground textures are for summer time only! So in order to do winter flights, I had to remove some of the original files and work on landclass from scratch. Not something I was expecting to do after paying for the airport. So, all in all, I took one star for afcad I had to adjust, one for land class I had to do myself and one for lack of winter textures.
PREALSOFT - 高清城市系列 - 维也纳 FSX P3D
Douglas
This is a follow up on Vienna and how the developer responded. Although a fix was attempted to make this airport right the developer ran into some issues that were beyond their control, so they did the best they could. The developer was very apologetic and made me the customer a generous gesture, they are not bad guys they just ran into an issue beyond their control. I have almost every one of their sceneries and I can tell you they are not bad. As far as Vienna goes what they offer is still much better than default, so give these guys support, they all work hard. The rating given is for the great response from Prealsoft
RICHER SIMULATIONS - 加勒比天空: 巴巴多斯-格兰特利·亚当斯国际机场 TBPB 2020 FSX P3D
Bernhard
This is a very nice scenery and necessary for the Caribean to fly. Even if this is published as "P3Dv4" there is a possibility to get this into P3Dv5 with the help of the developer - update for the config-tool needed and a patch. This all is handled in less than 10 hours. Thumbs up !
HUEYTUNING - PAF890SAR 菲律宾空军涂装 FSX P3D
Simon
This is a very short review of the excellent PAF890SAR repaint. I tried the paint kit by myself, but I wasted 2 weeks of time and at least 60 hours searching for any parts and could not find them. Finally, I gave it up. Designing a white repaint is anyway the hardest task. This pay ware repaint is worlds better than all the default and freeware repaints ever made for the Milviz Huey Uh-1h. I’ve made the effort and was comparing it with MILVIZ default USAF Rescue repaint. Here are just a few details that shows the skills of the artist. 1. The yellow stripe with the registration 66890 and the two blue stripes are designed very exactly around the tail fin. On the default USAF Rescue repaint, the black stripe at the tail fin was only mirrored and looks very loveless. 2.Th-
e PAF890SAR repaint is the only repaint where the landing skids are colored in another separate black tone. 3. It is also very striking that the antenna on the roof is painted in white. 4. The yellow ribbon and every single letter from the vertical lettering has been perfectly adapted to the shape of the body, (that’s a masterpiece) 5-
. Additional maintenance levels have been incorporated with lovely details. 6.The Rescue Angel and the Huey 2 stickers are razor sharp even in highest zoom level. I’m definitely thrilled with the great implementation of this Philippine Air Force rescue helicopter. I will definitely buy the other two repaints. The price may seem a bit expensive at first glance, but hey, try the paint kit yourself and you will quickly realize this PAF890SAR repaint is a masterpiece No doubt, five stars!
PREALSOFT - 高清城市系列 - 维也纳 FSX P3D
Douglas
Buyer Beware this scenery has problems and the developer states there is "No Fix" on their end for this. The color of the land class is very washed out and the ground, (land class) loads as you fly directly in front of your plane; it is very annoying and looks and performs bad. How he is allowed to continue to sale this is beyond me!
RDS - RUSSIAN DIGITAL SIMULATIONS - 俄罗斯-科纳科沃机场 UUEL P3D
David
Very nice airport and surroundings.I think it will need a little more lighting.
RICHER SIMULATIONS - 加勒比天空: 巴巴多斯-格兰特利·亚当斯国际机场 TBPB 2020 FSX P3D
Ramon
Being a Concorde fan, Barbados is a MUST HAVE scenery. I had been using a freeware version for years, and I have to admit I was quite happy with it so, the obvious question is, is it worth paying for the update? The developer really deserves the price charged. Barbados is a small airport, but this version is incredibly rich in details. Its quality is second to none, so if you like to invest in high quality sceneries there is no doubt your money will be well invested. As I mentioned, I am Concorde fan and currently I only fly Concorde-X by FSLabs, which requires P3Dv3. At fist, the only surface shown was the runway and there was grass were taxiways and the terminal platform where supposed to be. I contacted the developer, exchanged a couple of emails and in less than 24 hours we solved the problem. In my case what solved the problem was leaving the default directory for the installation (the counter-intuiti-
ve "Prepar3D v4 Add-ons") for the Config tool to work correctly. Otherwise, the "patch" to convert the default P3Dv4 scenery into a P3Dv3 compatible did not work and the problem described before showed. Now that my problem is solved I am a super-happy pilot flying my Concorde in and out Barbados :-)
AFLOSIM - 罗马尼亚-克卢日-纳波卡国际机场 LRCL FSX P3D
Jan
Since i flew to Romania last year in real life i really love the country! And i really enjoy the Addons from Aflosim such as Cluj and Bucharest. Very great detail and athmosphere and a very good pricing!!!! I would love to see Timisoara soon!!
LATINVFR - 美国-圣地亚哥国际机场 KSAN V2 FSX FSXSE
Leo
This is my second LatinVFR scenery and is completely awsome. I love how accurate is the depiction of this airport and it come with downtown San Diego too, the textures used are incredible with a good attention to details. It comes with a scenery configurator to change some elememts of the scenery like add/remove static objects, add/remove downtown San Diego and more. The FPS dont drop a all or maybe just a little bit and it runs smooth with no problem at all. Im surprise by the great performance it has on my simple HP laptop. The night textures inside the airport are really good but the night textures of the city are interesting because it doesnt look as illuminated as the default FSX/P3D textures but looks more realistic and I like it. Overall this scenery is a great scenery for KSAN and worth every penny. 100% recommended.
FSXCENERY - 肯尼亚-蒙巴萨-莫伊国际机场 HKMO FSX P3D
MR ANSELM J
This definitely is a great place to fly to the airport is very nicely designed and well equipped with ground stuff I'm very pleased with this product definitely 5stars for this very well done to the scenery team on yet another great scenery package;) :)
您居住的国家或地区