POLABS - POKEYS57U NO TERMINALS
POLABS - POKEYS57U NO TERMINALS
EUR 42.00  
$
£
¥

+ shipping
  • POLABS - POKEYS57U NO TERMINALS
  • POLABS - POKEYS57U NO TERMINALS
  • POLABS - POKEYS57U NO TERMINALS
  • POLABS - POKEYS57U NO TERMINALS
AVAILABLE SINCE: .
09/30/20159670
PUBLISHER
SOLD AND DISPATCHED BY

PoKeys57U is an easy-to-use USB device that combines a lot of inputs and outputs, and does not require complex programming knowledge. Pokeys57 provides 55 digital I/O (5V tolerant), 7 analog inputs (12-bit). All the I/O are controlled by the provided software which allows either to use the graphical user interface or advanced console type interface. The settings can be stored on the device, so no special software is needed on target system. PoKeys57 can be used as industrial or CNC control or data acquisition board. PoKeys is available with (PoKeys57UT) or without (PoKeys57UN) screw terminals.

Features:

  • Compatible with USB 1.1/2.0 HID standard
  • Standard USB keyboard simulation (with triggering support for up/down keys)
  • Standard USB joystick simulation (6 axis, 32 buttons with triggering support)
  • 55 digital inputs with pull-up resistors, freely mappable to virtual USB keyboard’s keys
  • 55 software controlled digital outputs
  • 7 analog inputs (12-bit) with adjustable low-pass filtering support
  • 3-axis 25 kHz or 8-axis 125 kHz Pulse engine
  • Up to 26 encoder pair inputs (3 high-speed encoder inputs, 1 ultra high speed encoder input)
  • Digital counters on specific digital input pins
  • Two 8x8 matrix LED display support
  • Up to 64 256-character long keyboard macro sequences
  • Up to 16x8 matrix keyboard with triggered keys/alternate function support
  • Two 8x8 matrix LED display support
  • Up to 6 high-speed fully configurable PWM outputs support (25MHz PWM timer)
  • HD44780-based character LCD support (up to 4x20 characters)
  • PoExtBus support for adding up to 10 external shift registers = 80 aditiona outputs
  • PoNET devices support (48-key CNC keyboard mapped to matrix keyboard, etc)
  • Support for Connection signal output
  • Support for up to 10 sensors on I2C bus, up to 10 sensors on 1-wire bus and up to 7 analog sensors
  • Communication compatible with PoKeys55 on application layer (data packet structure)
  • Intuitive and user-friendly software
  • Third-party support via communication DLL library and extensive protocol specification document that allows porting to other systems
  • Plugin for Mach3 and Mach4 software, PoKeys as 4-axis external motion controller or general purpose, highly cusomizable Human Machine Interface
  • PoBlocks graphical programming PLC software

Xively web services support (version 3.0.57 and on)

PoKeys57E automatically uploades the selected sensor values to the Xively web services, making them accessible from all over the world - look at our test feed of the greenhouse temperature and humidity sensor SHT21 and soil humidity, all connected to PoKeys57E: https://xively.com/feeds/136873450. For more details on using Xively web services with PoKeys57E devices, please look at this tutorial: http://www.mypokeys.com/?p=340.

Support for X-Plane flight simulator

See more here: http://forums.x-plane.org/index.php?showtopic=62459

Support for PoBlocks graphical programming software

Software

PoKeys software package contains

  • PoKeys configuration software
  • PoKeys firmware
  • PoKeys communication library
  • Manual
  • PoKeys USB driver (for fast interface)
  • PoBlocks graphical programming environment
  • Programming examples for C++, C#, VB.NET, Delphi

Cross-platform PoKeys communication library is available at bitbucket.org: https://bitbucket.org/mbosnak/pokeyslib

read more
REQUIREMENTS
  • Ethernet connection between host computer and PoKeys56U device
  • Included software requires Windows 2000/XP/Vista/Windows 7/8/10 with .NET framework 3.5 installed (ONLY FOR SYSTEMS WHERE THE DEVICES WILL BE CONFIGURED, TARGET SYSTEM NEEDS NO SOFTWARE INSTALLATION FOR THE DEVICE TO OPERATE AS A STANDARD NETWORK DEVICE)
Customers who bought this product also purchased
Customer Reviews
TROPICALSIM-2 - SÃO JORGE LPSJ 2019 FSX P3D
nassim
Nice scenery with a lot of details they have made a lot of efforts, keep up the good work!
PREALSOFT - HD CITIES VIENNA FSX P3D
Douglas
Buyer Beware this scenery has problems and the developer states there is "No Fix" on their end for this. The color of the land class is very washed out and the ground, (land class) loads as you fly directly in front of your plane; it is very annoying and looks and performs bad. How he is allowed to continue to sale this is beyond me!
ANTS AIRPLANES - TIGER MOTH PRO FSX P3D
David
Outstanding on all counts! The detail and physical characteristics are top notch. If you own just one classic biplane type make this one a top candidate. No, it’s not fast but it’s nimble and still capable of some aerobatics as long as you keep your load as low as possible. The “complete auto start” goes through all of the start up procedure pieces in detail. You could change that to a quick start (cntl E) or just set it to force a full manual start up. This plane has many little tidbits and added details from voice changes, to wear and tear tracking. Eventually your plane will need maintenance (if enabled) and yo7 will need to complete those maintenance tasks or suffer problems or failures. You get a lot more than bargained for here. Runs great with medium hi graphics settings at full realism on my 512 integrated graphics, Steam edition, even with intense weather settings while flying in add on scenery. Great for sight seeing VFR conditions
CENTRALSIM - SABE AEROPARQUE JORGE NEWBERY - BUENOS AIRES FSX P3D3
JR
Muy buen escenario lástima que falten los edificios de la zona militar, reemplazados por unas vallas. Very good pity that the buildings of the military zone are missing, replaced by fences.
ELIAS STASSINOS - PTTBUDDY
Sergiy
A very good product. Works nicely, as advertised, with Vpilot. Reasonable price. One advice - to develop more detailed, step by step, written instructions of how to set it up. Overall- 5 star product
CENTRALSIM - MPPA PANAMA PACIFICO INTERNATIONAL AIRPORT P3D
Luan
Nice work CentralSIm.... i loved it, FPS Friendlly, textures so nice worfth every Euro...
AUSCENE 2 - ADELAIDE INTERNATIONAL X V2.1 FSX P3D
Lee
This is a review of AUSCENE 2 - Adelaide International version 2.1 for FSX/P3D. Test system - ChillBlast Intel i9-9900k CPU overclocked, 32GB System RAM, 1TB Samsung Evo SSD, GeForce RTX 2080Ti 11GB Video, Windows 10 64-bit Home. This scenery was installed into Lockheed Martin's Prepar3Dv4.5 Hot Fix 3 (HF3) Pro license. Please note that this new version of Adelaide is NOT an upgrade, in the sense that you just install right over the top of an existing ASCENE version; The original version, if you have it, should be removed as the newer version 2.1 is a new FULL install. Unfortunately, the product for me scores lower for a lack of instructions concerning the install. The file size download was something I found confusing to begin with as the original version of AUscene Adelaide was 495MB, whereas the newer version 2.1 is smaller at 247MB! Usually I would expect an "improved" version or upgrade to an existing scenery to be a larger download. However, the scenery is fine. It is not Orbx quality, but it is very acceptable. For those users who have Orbx Global Base, Vector and Australia v2 installed, I can confirm that this product is compatible and works very well with the Orbx products installed. However, the layering is critical, I have found. Normally, Airport sceneries are layered ABOVE all base products such as Default Terrain, Default Scenery and the Base files. But in this case, I found that normal layering results in a huge loss of objects and the rise of default buildings and structures! Layering this scenery BETWEEN the Orbx Base products and Orbx Australia gives the same result. But by placing this scenery BELOW the Orbx products, but ABOVE the Default Base files as usual, it works. Most noticeable is the fact that the missing trees come back, as does a large part of the coastal infrastructure, west of the runway 5 threshold, all missing and flat looking if the scenery is not layered correctly. Your results may vary, but this is a pleasing scenery that works and to be honest, really enhances this little corner of Australia - and an airport that has been crying out to be developed for your Simulator! After I managed to install this correctly, I found that the quality is good with many nice touches. To read more on this, visit my blog - virtualairlinep-
ilot.org. Lee James - AUG 2020 West Sussex UK
ROUTEANN-STUDIO - ZSOF HEFEI XINQIAO INTERNATIONAL AIRPORT P3DV5/P3DV4.4+
Zicheng
This is amazing level of detail without any compromise of FPS. The terminal building looks pictorial and the 3D internal modeling pushes the realism into the next level in P3Dv5. Simply one of the best airport addons ever made.
AEROSOFT - SIM-WINGS PRO MUNICH P3D
Bradley
Maybe ill timed in some eyes but i must say this is a gorgeous rendition of Munich which outweighs T2Gs version. There are obvious attentions to detail here that T2G continue to ignore or miss out in their work and as often as i have brought T2G work i have always been ready to replace their scenerys with those from Simwings for example in this instance. The housekeeping of the installation here is excellent, updates are easy and clean and its just an overall better package. Simwings will be bringing us Hamburg in August too and you can bet your dollar it will be a touch better than JustSims version and updates will come free!!!
AUSCENE 2 - ADELAIDE INTERNATIONAL X V2.1 FSX P3D
MR ANSELM J
I have the 1st package of this fantastic airport scenery and to get the 2and version of this fantastic airport free was totally amazing v2 is even better so massive well done to the scenery team on yet another fantastic scenery package very happy with this product definitely 5stars for this very well done and nights textures are amazing aswell;):)
your country/region of residence