POLABS - POKEYS57U TERMINALS
POLABS - POKEYS57U TERMINALS
EUR 50.00 
$
£
¥

+ shipping
  • POLABS - POKEYS57U TERMINALS
  • POLABS - POKEYS57U TERMINALS
  • POLABS - POKEYS57U TERMINALS
  • POLABS - POKEYS57U TERMINALS
AVAILABLE SINCE: .
09/30/20159669
PUBLISHER
SOLD AND DISPATCHED BY

PoKeys57U is an easy-to-use USB device that combines a lot of inputs and outputs, and does not require complex programming knowledge. Pokeys57 provides 55 digital I/O (5V tolerant), 7 analog inputs (12-bit). All the I/O are controlled by the provided software which allows either to use the graphical user interface or advanced console type interface. The settings can be stored on the device, so no special software is needed on target system. PoKeys57 can be used as industrial or CNC control or data acquisition board. PoKeys is available with (PoKeys57UT) or without (PoKeys57UN) screw terminals.

Features:

  • Compatible with USB 1.1/2.0 HID standard
  • Standard USB keyboard simulation (with triggering support for up/down keys)
  • Standard USB joystick simulation (6 axis, 32 buttons with triggering support)
  • 55 digital inputs with pull-up resistors, freely mappable to virtual USB keyboard’s keys
  • 55 software controlled digital outputs
  • 7 analog inputs (12-bit) with adjustable low-pass filtering support
  • 3-axis 25 kHz or 8-axis 125 kHz Pulse engine
  • Up to 26 encoder pair inputs (3 high-speed encoder inputs, 1 ultra high speed encoder input)
  • Digital counters on specific digital input pins
  • Two 8x8 matrix LED display support
  • Up to 64 256-character long keyboard macro sequences
  • Up to 16x8 matrix keyboard with triggered keys/alternate function support
  • Two 8x8 matrix LED display support
  • Up to 6 high-speed fully configurable PWM outputs support (25MHz PWM timer)
  • HD44780-based character LCD support (up to 4x20 characters)
  • PoExtBus support for adding up to 10 external shift registers = 80 aditiona outputs
  • PoNET devices support (48-key CNC keyboard mapped to matrix keyboard, etc)
  • Support for Connection signal output
  • Support for up to 10 sensors on I2C bus, up to 10 sensors on 1-wire bus and up to 7 analog sensors
  • Communication compatible with PoKeys55 on application layer (data packet structure)
  • Intuitive and user-friendly software
  • Third-party support via communication DLL library and extensive protocol specification document that allows porting to other systems
  • Plugin for Mach3 and Mach4 software, PoKeys as 4-axis external motion controller or general purpose, highly cusomizable Human Machine Interface
  • PoBlocks graphical programming PLC software

Xively web services support (version 3.0.57 and on)

PoKeys57E automatically uploades the selected sensor values to the Xively web services, making them accessible from all over the world - look at our test feed of the greenhouse temperature and humidity sensor SHT21 and soil humidity, all connected to PoKeys57E: https://xively.com/feeds/136873450. For more details on using Xively web services with PoKeys57E devices, please look at this tutorial: http://www.mypokeys.com/?p=340.

Support for X-Plane flight simulator

See more here: http://forums.x-plane.org/index.php?showtopic=62459

Support for PoBlocks graphical programming software

Software

PoKeys software package contains

  • PoKeys configuration software
  • PoKeys firmware
  • PoKeys communication library
  • Manual
  • PoKeys USB driver (for fast interface)
  • PoBlocks graphical programming environment
  • Programming examples for C++, C#, VB.NET, Delphi

Cross-platform PoKeys communication library is available at bitbucket.org: https://bitbucket.org/mbosnak/pokeyslib

read more
REQUIREMENTS
  • Ethernet connection between host computer and PoKeys56U device
  • Included software requires Windows 2000/XP/Vista/Windows 7/8/10 with .NET framework 3.5 installed (ONLY FOR SYSTEMS WHERE THE DEVICES WILL BE CONFIGURED, TARGET SYSTEM NEEDS NO SOFTWARE INSTALLATION FOR THE DEVICE TO OPERATE AS A STANDARD NETWORK DEVICE)
Customers who bought this product also purchased
Shopping Cart
0 items
Credit: EUR 0.00
Authors & Publishers
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
0...9
Customer Reviews
MACHINE WASHING DESIGN - MONTENEGRO PODGORICA LYPG FSX P3D
VASSILIOS MADONIS
Nice scenery for prepare3dv4.5 .Good at frames .Nice job thanks
INDIAFOXTECHO - TA-4 SKYHAWK FLIGHT SIMULATOR X EDITION
Leonardo Fontinelle
Very good realism and i will buy it the another model, A-4 single place!
MK-STUDIOS - DUBLIN P3D4
Markus Maunula
Must have Airport and Scenery for anyone flying in and out of Europe. Great work by MK-Studios.
ALABEO - C400 CORVALIS TT FSX P3D
andrew niiranen
Looks really nice, very accurate, fast GA, great for sightseeing. Performance is good, flight dynamics seem realistic. My only complaint is it seems to just get yanked into the air and its's hard to grease a landing. I have logged a lot of hours in this plane, but cant seem to master the landing or take off. it seems like it just gets close to the ground and then pancakes on to the runway. It's strange.
FSIMSTUDIOS - CALGARY INTERNATIONAL AIRPORT CYYC FSX P3D
Shanard Letang
I have to give credit to the FSS. I love their work they have done and they have create these sceneries from the ground up. It's a great addition the P3D v4+. I love the blending with ORBX textures and surrounding scenery. No issues.
AEROSOFT - A330 PROFESSIONAL P3D V4.5
Angus Rowlands
Great Job Aerosoft I’m very happy with the A330. Few updates and you guys got a real winner here in my opinion. PBR, Modeling everything looks great. Plus it’s excellent on FPS and still has all the systems that I need to fly.
AEROSOFT - A330 PROFESSIONAL P3D V4.5
Irving Vargas
The textures are great, and the performance optimal. It is a good aeroplane. My biggest complain is that aerosoft still didn’t make the plane as realistic as possible, simulated a total engine failure and the rat did not deploy and the power did not transfer to battery... at least the glide was good, so system wise is not realistic, but if you wanna fly around, is a great aeroplane.
ON-NEXT DEVELOPMENT GMBH - SIMSOUNDS 3.0 - FSX P3D
George Sansom
I purchased Simsounds v2.1 back in June this year. I like this software so much and was delighted to hear that v3 is offered free to v2 users. I can't imagine using my sim now without Simsounds as it gives so much immersion to my sim using the buttkicker, all sounds are enhanced now in my sim when using simsounds. Y-
ou can also purchase voice packs to have different nationalities making announcements, these are well worth investing in. Thomas (the developer of Simsounds) is very obliging if you get stuck with anything, his support is awesome. Wel-
l done Thomas, keep up the great work.
ON-NEXT DEVELOPMENT GMBH - SIMSOUNDS 3.0 - FSX P3D
George Sansom
I purchased Simsounds v2.1 back in June this year. I like this software so much and was delighted to hear that v3 is offered free to v2 users. I can't imagine using my sim now without Simsounds as it gives so much immersion to my sim using the buttkicker, all sounds are enhanced now in my sim when using simsounds. Y-
ou can also purchase voice packs to have different nationalities making announcements, these are well worth investing in. Thomas (the developer of Simsounds) is very obliging if you get stuck with anything, his support is awesome. Wel-
l done Thomas, keep up the great work.
MEGASCENERYEARTH - OHIO V3 FSX P3D
DARRELL VILLA
This software brings more realistic into P3D only it does not change colour throughout the season such as no snow during winter time, no colour during spring, summer and autumn.
your country/region of residence