DRZEWIECKI DESIGN - KEWR NEWARK LIBERTY INTL MSFS

KEWR NEWARK LIBERTY INTL MSFS

DRZEWIECKI DESIGN
EUR 22.50
$
£
¥
UPDATE OFFER
If you previously purchased DRZEWIECKI DESIGN - NEW YORK AIRPORTS X - KEWR EXTRACT FSX P3D at simMarket, you are entitled to the special upgrade price of EUR 15.00 only. NOTE: The special upgrade price will be awarded automatically, therefore you must be logged into your same account used to purchase the previous version! If in doubt contact simMarket support first! NO REFUNDS GIVEN!

If you previously purchased DRZEWIECKI DESIGN - NEW YORK AIRPORTS XP X-PLANE 10/11 or DRZEWIECKI DESIGN - NEW YORK AIRPORTS X FSX P3D or DRZEWIECKI DESIGN - NEW YORK AIRPORTS X - KEWR EXTRACT FSX P3D or DRZEWIECKI DESIGN - NEW YORK AIRPORTS X - KJFK EXTRACT FSX P3D or DRZEWIECKI DESIGN - NEW YORK AIRPORTS X - KLGA EXTRACT FSX P3D or DRZEWIECKI DESIGN - NEW YORK AIRPORTS X - KTEB, KCDW AND KLDJ EXTRACT FSX P3D at simMarket, you are entitled to the special upgrade price of EUR 20.00 only. NOTE: The special upgrade price will be awarded automatically, therefore you must be logged into your same account used to purchase the previous version! If in doubt contact simMarket support first! NO REFUNDS GIVEN!

Newark Liberty International Airport (IATA: EWR, ICAO: KEWR, FAA LID: EWR), originally Newark Metropolitan Airport and later Newark International Airport, is an international airport straddling the boundary between the cities of Newark in Essex County and Elizabeth in Union County, New Jersey. Located about 4.5 miles (7.2 km) south of downtown Newark, it is a major gateway to points in Europe, South America, Asia, and Oceania. It is jointly owned by the cities and leased to its operator, the Port Authority of New York and New Jersey. It is the second-busiest airport in the New York airport system.

 

On August 3, 1927, Newark's mayor, Thomas Raymond, ordered plans for a new airport as people and organizations began calling for a new one in Newark. Construction began on April 1, 1928. The airport opened on October 1, 1928, as the Newark Metropolitan Airport. It was the first major airport to serve the New York metropolitan area and the first airport in the United States with a paved airstrip.

 

The nation's first air traffic control tower and airport weather station opened at Newark in 1930 (following a flight that crashed outside of Kansas City, killing five people, including a U.S. senator), and it became the first airport to allow nighttime operations after installing runway lights in 1952. The Art Deco-style Newark Metropolitan Airport Administration Building, adorned with murals by Arshile Gorky, was built in 1934 and dedicated by Amelia Earhart in 1935. It served as the terminal and a control tower until the opening of the North Terminal in 1953. Construction of the Brewster Hangar began in 1937 and continued through 1938. This hangar was the most advanced of its time. It was added to the National Register of Historic Places in 1979 and is now a museum and Port Authority Police headquarters.

 

After the hijacking and crash of United Airlines Flight 93 in the September 11 attacks in 2001 while en route from Newark to San Francisco, the airport's name was changed from Newark International Airport to Newark Liberty International Airport in 2002 This name was chosen over the initial proposal, Liberty International Airport at Newark, and pays tribute to the victims of the September 11 attacks and to the Statue of Liberty.

 

In 2016, the Port Authority approved and announced a redevelopment plan to replace Terminal A, set to fully open in 2022.

The busiest domestic routes from Newark include Orlando, Los Angeles, and San Francisco while the most popular international destinations are London, Tel Aviv, and Toronto. The main operators are United, JetBlue, Spirit Airlines, and American Airlines.

 

 

 

SCENERY FEATURES

  • A high-quality model of KEWR Newark Liberty Airport, featuring the up-to-date version with extensive details throughout the whole airport

  • FPS-friendly design, with epic night textures, dynamic lighting, PBR materials, high-definition mesh

  • Custom-animated people, vehicles, and trains

  • Performance-friendly interior modeling at all terminal buildings, hangars, and control towers, high-quality static aircraft, custom animations, custom animated jetways, custom sounds

  • Compatible with CARTAYNA & DRZEWIECKI AIRPORTS MSFS GSX PRO

read more
CUSTOMER REVIEWS
Ø from 17 Customer Reviews
 Review it now! 
read more
Language Filter:
  • All (17)
  • English (17)
  • Deutsch (0)
  • Francais (0)
  • 简体中文 (0)
  • русский (0)
Rating Filter:
  (3)
  (5)
  (4)
  (5)
  (0)
Most recent reviews:
Phillip
*Verified Product User*
01/19/2023
I've purchase DD airports for years. All are amazingly detailed and impressive. As far as details go, KEWR is quite nice. However, this airport could be the most disappointing of all with regards to performance. I even installed the latest update with the ability to remove various excess objects that could cause lower FPS. STILL... it's a hog. I know this is the NYC area, but that's never been a problem for me with my beefy computer. Hoping for more optimizations soon.
Michael
*Verified Product User*
01/15/2023
Having been based at EWR for years with Continental, Dr Z has captured the look and feel exactly - even though its less grimy and dirty than the real EWR, I can almost smell the Jet A. Performance is excellent for the area and is actually better than the default airport. Area around the airport is highly detailed (docks, Elizabeth, Linden, etc. and yes IKEA is there) so it just feels like EWR especially on approach. I use this with AIG at 100% and I see no performance issues - but I have a system that can run it satisfactorily. The terminal interiors are also highly detailed with announcements! Thankfully Dr Z also bothered to have the right airlines parked at the right gates and gives a choice to have no static aircraft. I have to say this is one of the best - if not the best - example of a MSFS large airport. Mind you, NYC is heavy on performance so be mindful that your system can handle it.
Justin
*Verified Product User*
01/05/2023
Great scenery, however, it's the only add on airport that gives me performance issues and my frames drop really bad (unflyable)during takeoff and landing.
Andrew
*Verified Product User*
12/26/2022
[Pros!]
Not a bad scenery, good model of the current version of Newark Liberty International Airport (KEWR) near Manhattan. nice modeling around the airport and interior is nicely model to an extent. Ground textures are good, but I felt like some of the runway textures lack quite a bit but good overall because it does represent the real-life format.

[Cons!]
When flying around the airport or taxing you will not get a stable FPS and you will get stuttering. I run a 3080 series of gpu and I was not able to get a good FPS around the airport, but it was playable. This is probably to do with the amount of interior design in the airport that should've been removed to increase FPS. I wish Drzewiecki Design would've hold back on the interior design of the airport and focus more on ground textures a lot. Speaking of ground textures, the airport scenery lacks a lot of ground textures, specifically apron textures that are not apparent in the scenery.

Other than that, if you have a good GPU that can run this scenery then totally it's really modeled to its fullest even though it's excessive number of props in the airport terminal that you would not look at from the outside in an aircraft.

Not my best purchase and I wish the exterior of the airport was put a bit more thought on the apron and ground textures.

Also, the PDF you get with it doesn't even include the Airport Diagram XD just a bunch of facts and stuff.
Roderick
12/23/2022
Please give people the option to turn off interiors, FPS is really quite bad, even for an NY scenery... get 10FPS less than INI EGLL...
Aro
12/22/2022
This is definitely the most detailed airport I have bought. The realism is amazing. I am very satisfied with this rendition of KEWR - finally a detailed version of this airport. On the performance side - I get the FPS drop near terminal D to about 25 but besides that, on aprons and runways, I maintain solid 40fps on RTX 3070. Thank you, DD for the amazing scenery!
Daniel
*Verified Product User*
12/21/2022
Top notch airport. DD's attention to detail is stunning and I think the airport is well worth the price.

Performance - as mentioned by others - tanks when close to the gate. I am running it with a few addons and no other airport puts such a strain on my system.
However, if you are running the sim on an AMD X3D chip - like I do - you may not have such a big performance deterioration. I am looking at a loss of about 10fps at the gate.
andrea
*Verified Product User*
12/21/2022
As always, DRZEWIECKI's products are of excellent quality and i love his scenarios, but this time I too have to complain about the fps. I have a fairly powerful pc (i9-11900F, NVIDIA GeForce RTX 3080, 64 GB RAM) and I get 18-20 fps at the gate. I'm very sorry because usually DRZEWIECKI's scenarios are fps friendly and I always buy them with great pleasure. This time I hope that something can be done to increase the fps perhaps with future updates.
lonny
*Verified Product User*
12/21/2022
Not sure how people are getting low fps with this airport. Sitting at the gate I get mid 40s. Taxiing around I get high 30s. Acceptable considering this is probably the most detailed scenery for MSFS
Patrick
*Verified Product User*
12/20/2022
Very high quality airport, with a loooot of details as expected for that kind of money and coming from drzewiecki. While it's definitely tough on FSP, I can't really confirm what others wrote before me with "unflyable" performance. I just did a flight yesterday with the PMDG 738 from the also new KDTW scenery and had an absolutely smooth landing experience in KEWR with fps around the 30ies on final until touchdown, with almost everything at ULTRA, 200 LOD, with VATSIM live traffic and around 30 FSLTL injected static aircraft at the gates.

This was the case until taxiing to the gates. The performance went right down the drain and I got barely 20 fps at the gate and VRAM was maxed out, something I rarely see. When reloading the flight at the same gate, the performance was back at 32 - 35 FPS. So not sure if it's directly related to the scenery or one of those "msfs performance over time degradation thing".

Anyway, I still recommend the buy.. Performance on takeoff and landing is acceptable for me at least with over 30FPS.

my specs for the record: 9900K, 2080TI, 32GB RAM
read more
FILESIZE
1.5GB
REQUIREMENTS

Microsoft Flight Simulator (FS2020)

Customer Reviews
DRZEWIECKI DESIGN - KEWR NEWARK LIBERTY INTL MSFS
Phillip
I've purchase DD airports for years. All are amazingly detailed and impressive. As far as details go, KEWR is quite nice. However, this airport could be the most disappointing of all with regards to performance. I even installed the latest update with the ability to remove various excess objects that could cause lower FPS. STILL... it's a hog. I know this is the NYC area, but that's never been a problem for me with my beefy computer. Hoping for more optimizations soon.
DRZEWIECKI DESIGN - KEWR NEWARK LIBERTY INTL MSFS
Michael
Having been based at EWR for years with Continental, Dr Z has captured the look and feel exactly - even though its less grimy and dirty than the real EWR, I can almost smell the Jet A. Performance is excellent for the area and is actually better than the default airport. Area around the airport is highly detailed (docks, Elizabeth, Linden, etc. and yes IKEA is there) so it just feels like EWR especially on approach. I use this with AIG at 100% and I see no performance issues - but I have a system that can run it satisfactorily. The terminal interiors are also highly detailed with announcements! Thankfully Dr Z also bothered to have the right airlines parked at the right gates and gives a choice to have no static aircraft. I have to say this is one of the best - if not the best - example of a MSFS large airport. Mind you, NYC is heavy on performance so be mindful that your system can handle it.
DRZEWIECKI DESIGN - KEWR NEWARK LIBERTY INTL MSFS
Justin
Great scenery, however, it's the only add on airport that gives me performance issues and my frames drop really bad (unflyable)duri-
ng takeoff and landing.
DRZEWIECKI DESIGN - KEWR NEWARK LIBERTY INTL MSFS
Andrew
[Pros!] Not a bad scenery, good model of the current version of Newark Liberty International Airport (KEWR) near Manhattan. nice modeling around the airport and interior is nicely model to an extent. Ground textures are good, but I felt like some of the runway textures lack quite a bit but good overall because it does represent the real-life format. [Cons!] Wh-
en flying around the airport or taxing you will not get a stable FPS and you will get stuttering. I run a 3080 series of gpu and I was not able to get a good FPS around the airport, but it was playable. This is probably to do with the amount of interior design in the airport that should've been removed to increase FPS. I wish Drzewiecki Design would've hold back on the interior design of the airport and focus more on ground textures a lot. Speaking of ground textures, the airport scenery lacks a lot of ground textures, specifically apron textures that are not apparent in the scenery. Other than that, if you have a good GPU that can run this scenery then totally it's really modeled to its fullest even though it's excessive number of props in the airport terminal that you would not look at from the outside in an aircraft. No-
t my best purchase and I wish the exterior of the airport was put a bit more thought on the apron and ground textures. Al-
so, the PDF you get with it doesn't even include the Airport Diagram XD just a bunch of facts and stuff.
DRZEWIECKI DESIGN - KEWR NEWARK LIBERTY INTL MSFS
Roderick
Please give people the option to turn off interiors, FPS is really quite bad, even for an NY scenery... get 10FPS less than INI EGLL...
DRZEWIECKI DESIGN - KEWR NEWARK LIBERTY INTL MSFS
Aro
This is definitely the most detailed airport I have bought. The realism is amazing. I am very satisfied with this rendition of KEWR - finally a detailed version of this airport. On the performance side - I get the FPS drop near terminal D to about 25 but besides that, on aprons and runways, I maintain solid 40fps on RTX 3070. Thank you, DD for the amazing scenery!
DRZEWIECKI DESIGN - KEWR NEWARK LIBERTY INTL MSFS
Daniel
Top notch airport. DD's attention to detail is stunning and I think the airport is well worth the price. Perfo-
rmance - as mentioned by others - tanks when close to the gate. I am running it with a few addons and no other airport puts such a strain on my system. Howeve-
r, if you are running the sim on an AMD X3D chip - like I do - you may not have such a big performance deterioration. I am looking at a loss of about 10fps at the gate.
DRZEWIECKI DESIGN - KEWR NEWARK LIBERTY INTL MSFS
andrea
As always, DRZEWIECKI's products are of excellent quality and i love his scenarios, but this time I too have to complain about the fps. I have a fairly powerful pc (i9-11900F, NVIDIA GeForce RTX 3080, 64 GB RAM) and I get 18-20 fps at the gate. I'm very sorry because usually DRZEWIECKI's scenarios are fps friendly and I always buy them with great pleasure. This time I hope that something can be done to increase the fps perhaps with future updates.
DRZEWIECKI DESIGN - KEWR NEWARK LIBERTY INTL MSFS
lonny
Not sure how people are getting low fps with this airport. Sitting at the gate I get mid 40s. Taxiing around I get high 30s. Acceptable considering this is probably the most detailed scenery for MSFS
DRZEWIECKI DESIGN - KEWR NEWARK LIBERTY INTL MSFS
Patrick
Very high quality airport, with a loooot of details as expected for that kind of money and coming from drzewiecki. While it's definitely tough on FSP, I can't really confirm what others wrote before me with "unflyable" performance. I just did a flight yesterday with the PMDG 738 from the also new KDTW scenery and had an absolutely smooth landing experience in KEWR with fps around the 30ies on final until touchdown, with almost everything at ULTRA, 200 LOD, with VATSIM live traffic and around 30 FSLTL injected static aircraft at the gates. This was the case until taxiing to the gates. The performance went right down the drain and I got barely 20 fps at the gate and VRAM was maxed out, something I rarely see. When reloading the flight at the same gate, the performance was back at 32 - 35 FPS. So not sure if it's directly related to the scenery or one of those "msfs performance over time degradation thing". Anyway, I still recommend the buy.. Performance on takeoff and landing is acceptable for me at least with over 30FPS. my specs for the record: 9900K, 2080TI, 32GB RAM
your country/region of residence
Newsletter - Stay always up to date!

The New SIMMARKET App

Explore an endless world !

Download App