FEELTHERE - CALL! FOR THE LEGACY PILOT IN COMMAND
FEELTHERE - CALL! FOR THE LEGACY PILOT IN COMMAND
EUR 12.99  
$
£
¥
  • FEELTHERE - CALL! FOR THE LEGACY PILOT IN COMMAND
  • FEELTHERE - CALL! FOR THE LEGACY PILOT IN COMMAND
DISPONIBLE DEPUIS: .
04/09/20082901
EDITEUR
VENDUS PAR

CALL! for the Legacy Pilot In Command for FS2004 and FSX in one package

CALL! for the Legacy Pilot In Command is a First Officer, Flight Attendant simulation. This easy to use software brings great realism into your virtual cockpit making you "feel there".

The First officer reads the following checklists:

  • Dark/Cold
  • Engines Ready To Start
  • Engine Startup
  • Flight Attandent Safety
  • Before Takeoff
  • After Takeoff
  • Before Descend
  • Approach Checklist
  • Before Landing
  • After Landing
  • Leaving the Aircraft

After reading each item it will wait for your action making sure you are properly following the checklist flow.

The Flight Attendant SAFETY feature will initiate a safety briefing before takeoff. Upon landing She will automatically remind the passengers to remain seated until full stop.

lire plus
POSSIBILITES DE LIVRAISON
TÉLÉCHARGEMENT DIRECT
FICHIER
25.5MB
CLÉ D'ENREGISTREMENT
Ce produit n'a pas de clé d'enregistrement, vous pouvez simplement exécuter le fichier téléchargé pour installer
NECESSITE
FS2004 FSX
Wilco/Feelthere Legacy Pilot In Command
Les clients qui ont acheté cet article ont également acheté
Commentaires client
DIGITAL DESIGN - TENERIFE V2 P3D5
Daniel
A really beautiful scenery which makes flying in and out of Tenerife South a real joy. The colouring of the terrain is really nice and the autogen around the airport with many hand placed buildings is superb. The addition of the sloped runway and also slope of the taxiways really adds a new level of immersion to the sim and just brings the airport to life. I deduct one star just because the autogen around the airport is beautifully done, but the autogen for the rest of the island is non-existent and this is a real shame. Overa-
ll I recommend the scenery!
SAMSCENE - SHANGHAI CITY TIMES FSX P3D
yokie
I am amazed by the shanghai city center especially the bund and pudong area, also with acceptable frame rate, whether flying from or landing either the Hongqiao or Pudong airport, now with the shanghai city skyline gives a lot of immersion
WF SCENERY STUDIO - HONG KONG INTERNATIONAL AIRPORT VHHH P3D
Jiekeng
good job! I think this VHHH is better than T2G,nice fps,more detail,great!
FSXCENERY - KSYR SYRACUSE HANCOCK INTERNATIONAL AIRPORT FSX P3D
Andrew
First of all, I would like to thank the developer for the Syracuse Hancock Airport. I feel deeply connected to Syracuse and finger lakes area, so I'm glad I can make few flights to and from this airport. Howev-
er. Just like one of the pilots before me, I think, the price for the quality if too much. I know, the airport has been released some years back, but I had to spend another 5-6 hours working on afcad file (adjusting gates, adding missing airbridges, hazard lights and also apron lights, as these do not show in my sim for some reason). I visited Hancock airport in late Autumn of 2019 during snow blizzards so I was hoping, come winter, I will be able to do some nice winter flights only to discover, that the ground textures are for summer time only! So in order to do winter flights, I had to remove some of the original files and work on landclass from scratch. Not something I was expecting to do after paying for the airport. So, all in all, I took one star for afcad I had to adjust, one for land class I had to do myself and one for lack of winter textures.
PREALSOFT - HD CITIES VIENNA FSX P3D
Douglas
This is a follow up on Vienna and how the developer responded. Although a fix was attempted to make this airport right the developer ran into some issues that were beyond their control, so they did the best they could. The developer was very apologetic and made me the customer a generous gesture, they are not bad guys they just ran into an issue beyond their control. I have almost every one of their sceneries and I can tell you they are not bad. As far as Vienna goes what they offer is still much better than default, so give these guys support, they all work hard. The rating given is for the great response from Prealsoft
RICHER SIMULATIONS - CARIBSKY: TBPB 2020 FSX P3D
Bernhard
This is a very nice scenery and necessary for the Caribean to fly. Even if this is published as "P3Dv4" there is a possibility to get this into P3Dv5 with the help of the developer - update for the config-tool needed and a patch. This all is handled in less than 10 hours. Thumbs up !
HUEYTUNING - PAF890SAR FSX P3D
Simon
This is a very short review of the excellent PAF890SAR repaint. I tried the paint kit by myself, but I wasted 2 weeks of time and at least 60 hours searching for any parts and could not find them. Finally, I gave it up. Designing a white repaint is anyway the hardest task. This pay ware repaint is worlds better than all the default and freeware repaints ever made for the Milviz Huey Uh-1h. I’ve made the effort and was comparing it with MILVIZ default USAF Rescue repaint. Here are just a few details that shows the skills of the artist. 1. The yellow stripe with the registration 66890 and the two blue stripes are designed very exactly around the tail fin. On the default USAF Rescue repaint, the black stripe at the tail fin was only mirrored and looks very loveless. 2.Th-
e PAF890SAR repaint is the only repaint where the landing skids are colored in another separate black tone. 3. It is also very striking that the antenna on the roof is painted in white. 4. The yellow ribbon and every single letter from the vertical lettering has been perfectly adapted to the shape of the body, (that’s a masterpiece) 5-
. Additional maintenance levels have been incorporated with lovely details. 6.The Rescue Angel and the Huey 2 stickers are razor sharp even in highest zoom level. I’m definitely thrilled with the great implementation of this Philippine Air Force rescue helicopter. I will definitely buy the other two repaints. The price may seem a bit expensive at first glance, but hey, try the paint kit yourself and you will quickly realize this PAF890SAR repaint is a masterpiece No doubt, five stars!
PREALSOFT - HD CITIES VIENNA FSX P3D
Douglas
Buyer Beware this scenery has problems and the developer states there is "No Fix" on their end for this. The color of the land class is very washed out and the ground, (land class) loads as you fly directly in front of your plane; it is very annoying and looks and performs bad. How he is allowed to continue to sale this is beyond me!
RDS - RUSSIAN DIGITAL SIMULATIONS - UUEL KONAKOVO AIRFIELD IAHS P3D
David
Very nice airport and surroundings.I think it will need a little more lighting.
RICHER SIMULATIONS - CARIBSKY: TBPB 2020 FSX P3D
Ramon
Being a Concorde fan, Barbados is a MUST HAVE scenery. I had been using a freeware version for years, and I have to admit I was quite happy with it so, the obvious question is, is it worth paying for the update? The developer really deserves the price charged. Barbados is a small airport, but this version is incredibly rich in details. Its quality is second to none, so if you like to invest in high quality sceneries there is no doubt your money will be well invested. As I mentioned, I am Concorde fan and currently I only fly Concorde-X by FSLabs, which requires P3Dv3. At fist, the only surface shown was the runway and there was grass were taxiways and the terminal platform where supposed to be. I contacted the developer, exchanged a couple of emails and in less than 24 hours we solved the problem. In my case what solved the problem was leaving the default directory for the installation (the counter-intuiti-
ve "Prepar3D v4 Add-ons") for the Config tool to work correctly. Otherwise, the "patch" to convert the default P3Dv4 scenery into a P3Dv3 compatible did not work and the problem described before showed. Now that my problem is solved I am a super-happy pilot flying my Concorde in and out Barbados :-)
Votre pays/région de résidence