JUSTFLIGHT - JUSTTRAINS - FANTASTIC WEST SOMERSET RAILWAY

JUSTTRAINS - FANTASTIC WEST SOMERSET RAILWAY

JUSTFLIGHT
EUR 16.63
$
£
¥
HINZUGEFÜGT AM:
16.03.2016 10094
VERKAUF DURCH

Just Trains is proud to bring you an authentic reproduction of the West Somerset Railway for you to drive on your PC.

The West Somerset Railway, the epitome of a preserved country branch line railway harking back to bygone days, is the longest 'heritage' line in England, with trains running 20 miles between Bishops Lydeard station (four miles from Taunton) and Minehead, via the Quantock Hills and along the Bristol Channel coast. The line is still connected to the national rail network on the Great Western Line at the southern end.

This Fantastic West Somerset Railway add-on for Train Simulator in fact represents the line some time in 2015, following the introduction of a new siding at Norton Fitzwarren and also the southern extension of the passing loop at Williton Station. The line is almost entirely accurately signalled, and has been accurately modelled with numerous custom objects, buildings and signals to show the splendour of the West Somerset Railway in digital form.

The route includes 14 Standard Scenarios - please note that additional stock (not supplied) is required to enable all the scenarios to be operated.

Important! Please note that The Fantastic West Somerset Railway is compatible with Train Simulator 2015. If you purchased Train Simulator after 20th September 2012 then you will require the European Loco & Asset Pack (available to purchase via Steam) for the route to display correctly.

The West Somerset Railway logo and name are used with the kind permission of the West Somerset Railway PLC.  

ROUTE FEATURES

  • Authentic reproduction of the West Somerset Railway in 2015
  • Route class: Heritage
  • Route length: approximately 20 miles
  • Beautifully detailed and immersive scenery around the Quantock hills and North Somerset coast.
  • Includes 14 Standard scenarios and one Free Roam scenario
  • Route is Quick drive enabled
  • Includes custom signals

CUSTOM BUILDINGS AND OBJECTS

  • Bishops Lydeard station - including station buildings, signal box, water tower and bridge
  • Crowcombe Heathfield station - including station buildings and signal box
  • Stogumber station
  • Williton station - including station buildings, signal box and engine sheds
  • Doniford Halt
  • Watchet station - including station buildings and boat museum
  • Washford station - including station buildings and Somerset and Dorset Railway Trust shed
  • Blue Anchor station - including station buildings and signal box
  • Dunster station - including station buildings and shed
  • Minehead station - including station buildings, turntable and engine sheds
  • Specific custom 3D trees and foliage
  • Custom platforms
  • Custom design GWR signals
  • Custom modern level crossings

SCENARIOS

Note: For certain scenarios to run correctly, the following locomotives are required:

Just Trains: Standard 4MT Advanced, Voyager Advanced, GWR Manor Class and Digital Traction Rebuilt Bulleid Light Pacific

Steam: BR Castle Class, Freightliner Class 70, Class 150 DMU

Standard scenarios

70s at Norton
Duration: 30 minutes
Season and weather: Autumn - cloudy
Required locomotive: Steam - Freightliner Class 70

Drive a Class 70 on a special working around Norton Fitzwarren and up to Bishops Lydeard. There is some shunting to be completed, as well as a bit of a fast run up and down to Lydeard.

7F from Minehead
Duration: 90 minutes
Season and weather: Spring - clear
Required locomotive: Default 7F 2-8-0 Prussian blue

Drive from Minehead to Bishops Lydeard with the S&DJR 7F and seven carriages in tow. There's nothing complicated about this run - it's just a pleasant trip through the countryside. Be sure to keep an eye on your fire as you climb the two hills en route, though!

Engineers Working
Duration: 60 minutes
Season and weather: Winter - clear
Required locomotive: Default Class 37 BR Green split headcode

You're in command of the resident Class 37 and will be driving to Norton Fitzwarren to collect an engineering train. You will then drive to Williton and deposit some wagons before terminating at Washford.

Heritage HST
Duration: 45 minutes
Season and weather: Spring - clear
Required locomotive: Default High Speed Train BR Blue

The first preserved HST unit is visiting the West Somerset Railway for an upcoming diesel gala. You are driving the lead unit along with a set of Mk 2s and 3s and a dead Class 47 from the main line at Norton Fitzwarren to Williton.

Steam Gala Part 1
Duration: 90 minutes
Season and weather: Autumn – 3D cloudy
Required locomotives: JT GWR Manor Class and Steam BR Castle Class

Take the Manor from Bishops Lydeard to Minehead on the opening service of the Autumn Steam Gala.

Steam Gala Part 2
Duration: 90 minutes
Season and weather: Autumn – cloudy
Required Locomotives: JT GWR Manor Class and Steam BR Castle Class

Take 5029 'Nunney Castle' from Bishops Lydeard to Norton Fitzwarren where the locomotive must be turned on the triangle. Then return to Bishops Lydeard and collect the arriving service which you will then take non-stop to Minehead.

Steam Gala Part 3
Duration: 90 minutes
Season and weather: Autumn – 3D cloudy
Required locomotives: JT GWR Manor Class and Steam BR Castle Class

Take 5029 'Nunney Castle' and a Manor from Minehead back to Bishops Lydeard. You only have seven coaches but are still double-headed. This is a chance for you to admire the view and for your fireman to have a bit of a rest!

Santa Special
Duration: 30 minutes
Season and weather: Winter – cloudy snow
Required assets: Steam European Loco & Asset Pack

Take the S&DJR 7F from Bishops Lydeard to Williton on a snowy December day. You have 10 coaches in tow so this won't be the easiest of tasks to accomplish!

Sprinting the West Somerset
Duration: 90 minutes
Season and weather: Spring - stormy
Required locomotive: Steam Class 150 DMU

Drive a Class 150 from Minehead on a special charter service to Cardiff. You are driving as far as the network rail boundary at Norton Fitzwarren.

Standard Storm
Duration: 75 minutes
Season and weather: Summer - clear
Required locomotive: JT Standard 4MT Advanced

Drive visiting Standard 4 No. 76079 from Bishops Lydeard to Minehead with an 11-coach incoming railtour in tow. This one is a challenge for even the most skilled of drivers!

A Round Trip
Duration: 190 minutes
Season and weather: Summer - clear
Required locomotive: Default Black 5

Drive visiting Black 5 No. 45379 from Bishops Lydeard to Minehead and return. This is a long scenario but very rewarding when completed!

Minehead Driver Experience
Duration: 100 minutes
Season and weather: Autumn - rainy
Required locomotive: Default Black 5

Drive a Black 5 from Minehead to Williton and back on a driver experience day. You will be required to drive both ways and oversee the correct uncoupling and running round of the train at Williton.

Late Evening Test
Duration: 60 minutes
Season and weather: Autumn - clear
Required locomotive: JT Digital Traction Rebuilt Bulleid Light Pacific

You are in charge of a test run of the newly restored West Country Class No. 34046 Braunton. Starting at Minehead, you will run all the way to Bishops Lydeard to complete the test. Along the way you will be required to stop at certain stations to check the engine's bearings and will also need to conduct two brake tests. Enhanced permissible speeds are active during this scenario, allowing you to run at up to 70mph in places - make sure you know the route, though, as it's easy to get lost and come unstuck!

Visiting Voyager
Duration: 120 minutes
Season and weather: Summer - clear
Required locomotive: JT Voyager Advanced

A Virgin Voyager is visiting the line for the first time. You are to drive it from the mainline to Minehead and then stable the unit.

Free Roam scenario

Free Roam Scenario
Locomotive: Use default stock

weiterlesen
DATEIGRÖßE
367MB
DEMO DOWNLOAD
HINWEIS
An active internet connection is required for activation.
ANFORDERUNGEN
  • Train Simulator 2016

    NB: The European Loco & Asset Pack (available to purchase via Steam) is required for the route to display correctly.
     
  • 3.0GHz PC or any Dual Core
  • Windows 8 / 7 / XP / Vista
  • 512MB RAM (1GB for Windows Vista / 7 / 8)
  • 256MB graphics card with Pixel Shader 3.0 (AGP/PCE only)
  • Direct X 9.0c compatible sound card
  • 300MB hard drive space
Note: For certain scenarios to run correctly, the following locomotives are required:

Just Trains: Standard 4MT Advanced, Voyager Advanced, GWR Manor Class and Digital Traction Rebuilt Bulleid Light Pacific

Steam: BR Castle Class, Freightliner Class 70, Class 150 DMU
Kundenrezensionen
JEPPESON2001 - VICTORIA FALLS SCENERY PACKAGE MSFS
Volker
Tolle Atmosphäre! Was die Wasserfälle betrifft: Grafik und Sound top . Schöne Zusatzanimation-
en (Bungee jumping, Gleiter etc.)
AIRWORTHY DESIGNS - TFFJ ST. BARTS MSFS
Claudio Marc
Sehr Nett gemachte neue Scenery hier in Saint Barthelemi TFFJ , empfehlenswert auch für , ältere respektive schwächere PC - Systeme !
FS2CREW - FS2CREW: FENIX A320 EDITION MSFS
Wolfgang
Ich fliege schon seit jungen Jahren Flugsimulatione-
n. Und möchte hier mal eine deutliche Kaufempfehlung aussprechen. Diese FS2Crew Software hat deutliche Schritte nach vorne gemacht. Nicht weil sie komplexer ist. Sondern weil das Bedienen erleichtert wurde. Dabei möchte ich aber nicht seine Vorgänger schmälern. Denn die hatten auch eine schöne Komplexität. -
Ich habe nur einen Flug in der Buttonkonfigura-
tion dieser Fenix-Version gemacht, um dabei einige Einstellungen zu machen die einem diese Software bietet. Scho-
n beim 2.ten Flug bemerkte ich, dass es richtig cool zur Sache geht. Nach dem Einsprechen der Befehle in die Software, merkte ich das die Software mit einem arbeitet und nicht gegen einem arbeitet. In Verbindung mit Fenix ein Top-Produkt, und zugleich eine Traumpaarung. Klare Kaufempfehlung 5. Sterne. P.S.: Vergesst nicht darauf zu achten, dass die Soundtreiber aktuell sind. Das hätte ich bald übersehen. Sonst läuft nix ;)
VIRTUALCOL - EMB 170-175 SERIES MSFS
lorenz
Preis, Leistung Tip Top. Sehr schöner Feierabendflieg-
er.
SPOGI INC - LOCKHEED L-1011-500 TRISTAR XP11/12
Jürgen
Natürlich kann man für diesen Preis nicht gerade PMDG erwarten,-
doch die Tristar ist gut gemacht Außenansicht S-
ounds 3D Cockpit passable Flugeigenschaft-
en u. gute Annimationen v.Flaps,Speed Brake,Reverse(U-
mkehrschub) we-
nn man über gute Steuerelememte wie Horn,Joystick und Throttle vefügt ,die umständliche Bedienung der Cockpit Schalter sollte schnell verbessert werden
JAVIER ITURRALDE LIND - CARTAYNA FILES GSX MSFS PACK 2
Eike
Spannendes und perfekt umgesetztes Produkt für eine noch bessere Immersion des GSX! Must Have!
JAVIER ITURRALDE LIND - CARTAYNA & DRZEWIECKI AIRPORTS MSFS
Eike
Spannendes und perfekt umgesetztes Produkt für eine noch bessere Immersion des GSX! Must Have!
JAVIER ITURRALDE LIND - CARTAYNA FILES GSX MSFS PACK 3
Eike
Spannendes und perfekt umgesetztes Produkt für eine noch bessere Immersion des GSX! Must Have!
JAVIER ITURRALDE LIND - CARTAYNA FILES GSX MSFS PACK 1
Eike
Hochwertige und professionell programmierte GSX Files! Funktionieren perfekt! Ich konnte keine Mängel erkennen! Top Produkt!
MP DESIGN STUDIO - AEROSPATIALE SA315 LAMA FSX P3D
Harald
Nach längerer Zeit der Nichtbenützung habe ich mich in diesen Tagen wieder mal intensiver mit dieser Lama auseinandergese-
tzt. Es gab bei mir Probleme beim Landen, dass der Collectiv-Stick plötzlich nicht mehr reagierte und ich dadurch mehrmals zu Boden gekracht bin. Habe dann auch noch die FSUIPC-Steuerun-
g herausgelöscht. Komisch, manchmal funktioniert der Collective-Stic-
k, manchmal nicht. Das Lama würde mich schon sehr interessieren, diese waren in unserer Region auch viele Jahre im Einsatz. Bin sogar mit dem Designstudio im Kontakt, weswegen der Throttle/Collec-
tive Probleme macht. Dann habe ich auch noch den Schalter "Reflektor switch" am Stick eingeschaltet. -
Auch Kalibrieren nützt nur teilweise. A-
fter longtime not used this helicopter I have try some hours to fly this nice helicopter. I have little troubles with the collective stick. Then I have removed the controls FSUIPC. I have a little contact with the studio MP. Somethime the collective is going correct with the landing, sometimes not. I have enabled always the toggle "reflector switch". I have try with the calibration, only partial successfully.
aufenthaltsland/region
Newsletter - Bleib immer auf dem Laufenden!

The New SIMMARKET App

Explore an endless world !

Download App