• XTREME PROTOTYPES - X-15-1
  • XTREME PROTOTYPES - X-15-1
  • XTREME PROTOTYPES - X-15-1
  • XTREME PROTOTYPES - X-15-1
  • XTREME PROTOTYPES - X-15-1
  • XTREME PROTOTYPES - X-15-1
  • XTREME PROTOTYPES - X-15-1
  • XTREME PROTOTYPES - X-15-1
  • XTREME PROTOTYPES - X-15-1
  • XTREME PROTOTYPES - X-15-1
  • XTREME PROTOTYPES - X-15-1
  • XTREME PROTOTYPES - X-15-1
  • XTREME PROTOTYPES - X-15-1
  • XTREME PROTOTYPES - X-15-1
В ПРОДАЖЕ С: .
08/17/20072527
ИЗДАТЕЛЬ
РАЗРАБОТЧИК
БАНДЛ
Купить 3 за 9.6€ вкл. НДС (9.60€ без НДС) за каждый

XTREME PROTOTYPES - X-15-1
XTREME PROTOTYPES - X-15-2/3

Чтобы воспользоваться этим предложение покупка должна совершаться с той же учетной записи! Без исключений! Возврат не производится!

This package contains 2 versions of the X-15-1 with the interim XLR-11 rocket engines and two versions of the aircraft with the million-horsepower XLR-99 rocket engine.

The North American X-15-1 (serial number AF56-6670) was the first of three experimental X-15 aircraft built in the late 1950s to demonstrate the ability of pilots to fly rocket-powered airplanes out of the earth's atmosphere and back to precision landing. The X-15 was a single-place research airplane, designed to obtain data on flight at extremely high altitudes and speeds and on the effects of such flight conditions on the aircraft and on the pilot. The X-15-1 was rolled out in October 1958, and successfully completed its first powered flight in January 1960, after a series of captive and glide flights. The No. 1 aircraft completed 81 missions during the entire (9-year) X-15 research program. The legendary test pilot Scott Crossfield was the first to fly the X-15-1 in the spring of 1959 while NASA pilot Bill Dana flew the aircraft for the last time in October 1968.

X-15-1 for Flight Simulator Key Features

  • Custom X-15 flight model to simulate rocket-powered high-speed and high-altitude flight in FS2004 and FSX:
    • Supersonic flight up to Mach 4.65 in FS2004 and FSX
    • High-altitude flight up to 354,200 feet in FSX (100,000 feet in FS2004)
    • Can be launched either from a high altitude like the real X-15 or take off from an airport runway like other Flight Simulator aircraft
    • Good maneuvrability at supersonic speeds and excellent gliding capabilities
  • Highly detailed 3D models with more than 300 parts, 60 animations, reflective textures and unique markings, based on archive material
  • Fully functional instrument panels with 240 custom gauges and systems to simulate almost every step and procedure required in a typical X-15 mission
  • Spectacular visual effects including rocket engine flames, APU exhaust and propellant jettison effects
  • Uses a custom fuel management system with three different types of propellants (water-alcohol or ammonia, liquid oxygen and hydrogen peroxide) and pressurized helium or nitrogen, like in the real-world X-15 rocket plane
  • Includes a comprehensive 100-page user manual inspired from the original X-15 utility flight manuals, in a printable PDF format (English and French language versions are included with the software)
  • NEW! Fully functional 3D virtual cockpits with over 900 parts and nearly 200 animated gauges, switches, levers, light indicators and flight instruments
  • NEW! New VC switches, control sticks, handles and levers
  • NEW! Multiple side views for the main 2D panel
  • NEW An automatic ignition sequence to start the X-15 engine at the touch of a single “magic” red button
  • NEW! New cockpit spotlights (VC and exterior model)
  • NEW! Ten camera definitions or views (FSX only), some of them corresponding to the real-world X-15 external bug-eye cameras
  • NEW! New X-15 custom sound sets for FSX and FS2004
  • NEW! New “invisible” canopy mode to fly the X-15 without her clamshell-type canopy on for more visibility and a spectacular view from the VC
  • NEW! Twelve saved flights based on X-15 historical missions to simulate a high-altitude launch from a carrier aircraft or a takeoff from the ground
  • Spectacular visual special effects including rocket engine flames, APU exhaust and propellant jettison effects
  • A custom fuel management system with three different types of propellants (water-alcohol or ammonia, liquid oxygen and hydrogen peroxide) and pressurized helium or nitrogen, like in the real-world X-15 rocket plane
  • NEW! A comprehensive 100-page user manual and a 20-page VC manual inspired from the original X-15 utility flight manuals, in a printable PDF format (English and French language versions are included with the software)

X-15-1 Add-on Aircraft Description

This package contains two versions of the X-15-1 aircraft (serial number AF56-6670) equipped with the XLR-11 rocket engines (limited-mission configuration) and two versions of the X-15-1 aircraft equipped with the XLR-99 rocket engine (design-mission configuration).

The X-15-1, equipped with the interim XLR-11 engines, completed 21 flights between June 1959 and February 1961, before it was converted to the XLR-99 engine configuration. The aircraft completed 60 flights in its design-mission configuration between August 1961 and October 1968.

Removable wing-tip pods that contained cameras and various research instruments were attached to the aircraft in the fall of 1964. The pods and other parts of the airplane were covered with temperature-sensitive paints of different colors. The second variation of the aircraft also features a tail-cone box with additional experimentation equipment and a reconnaissance camera window under the front compartment.

X-15-1 Advanced Instrument Panels

What makes the X-15 for Flight Simulator series exciting and unique are the advanced fully functional instrument panels with custom gauges and systems to simulate almost every step and procedure required in a typical X-15 mission:

  • Aircraft servicing (all three propellants and gases);
  • APUs/generators/hydraulic pump operation;
  • Propellant tank pressurization;
  • Engine precool and prime;
  • Turbopump operation;
  • Rocket ignition sequence;
  • Monitoring of propellant pressure gauges;
  • Propellant jettison.

Almost every X-15 internal system has been integrated into the X-15 for Flight Simulator panels:

  • Engine propellant and control system;
  • Engine ignition system;
  • APUs and electrical power distribution systems;
  • Hydraulic systems;
  • Temperature control systems.

The X-15-1 for Flight Simulator comes with three main instrument panels and eight secondary panels, either in their original black version or the later light blue-gray version. Included with each X-15-1 add-on aircraft is:

  • A main panel;
  • A service panel;
  • A "vent, pressurize, jettison" lever panel;
  • A throttle and speed brake lever panel;
  • A left side panel;
  • A right side panel;
  • A radio panel (ADF panel on some aircraft);
  • A center pedestal panel with research instrumentation and stability augmentation system panels;
  • An RAS (reaction augmentation system) panel on some aircraft;

In addition, the default Flight Simulator Garmin GPS and magnetic compass panels are available from the main panel. 240 custom gauges have been developed for the X-15-1 for Flight Simulator and each one has been carefully designed based on the original instrument found in the real X-15 aircraft. Note that one variation of the X-15-1 has a revised light blue-gray instrument panel that replaced the original black panel in the summer of 1963. The new panel contrasted better with the gauges, light indicators and flight instruments.

X-15-1 Utility Flight Manual

Included with the software are the 100-page English and French versions of the X-15-1 Utility Flight Manual, available in a printable PDF format (Adobe® Acrobat® Reader 5.0 or later required).

The manual has been specifically designed for the X-15 for Flight Simulator and is based on the original real-world X-15 utility flight manuals.

The flight manual contains the necessary information for the installation and operation of the X-15-1 virtual aircraft and associated instrument panels. It contains instructions and procedures for both XLR-11 and XLR-99 rocket engine operation, on the X-15-1 for Flight Simulator.

The end-user is encouraged to print a copy of the manual for his/her own use, in conjunction with the add-on simulation software. The best way to keep the manual handy for easy reference during flight is to organize it in a durable presentation binder.

Product Specifications (X-15-1 for Flight Simulator)

GENERAL FEATURES

2 versions of the X-15-1 aircraft (s/n AF56-6670) with the XLR-11 rocket engines (limited-mission configuration):

  • "Clean" rollout version with the NACA vane-type boom nose and the original (XLR-11) black panel;
  • "Dirty" version with the NACA vane-type boom nose and the original (XLR-11) black panel.

2 versions of the X-15-1 aircraft (s/n AF56-6670) with the XLR-99 rocket engine (design-mission configuration):

  • "Dirty" version with the NACA/Nortronics ball nose and the original (XLR-99) black panel;
  • "Dirty" version with the NACA/Nortronics ball nose, wing-tip pods, tail-cone box and the (XLR-99) light blue-gray panel.

FLIGHT MODEL FEATURES

  • Custom X-15 flight model to simulate rocket-powered high-speed and high-altitude flight in FS2004 and FSX
  • Two Reaction Motors XLR-11, 5900-pound four-chambered liquid-fuel turbo-rocket engines
  • (or) One Reaction Motors XLR-99, "throttable" 60,000-pound liquid-fuel turbo-rocket engine
  • Supersonic flight up to Mach 4.65 in FS2004 and FSX
  • High-altitude flight up to 354,200 feet in FSX (100,000 feet in FS2004)
  • Ground takeoff or high-altitude launch
  • Good maneuvrability at supersonic speeds
  • Excellent gliding capabilities

AIRCRAFT 3D MODEL FEATURES

  • Highly detailed models based on archive material, with more than 300 parts and 60 animations
  • Reflective textures
  • Unique markings and liveries (on each aircraft)
  • Dynamic frost texture on fuselage (around the liquid oxygen tank when filled)
  • Movable aerodynamic control surfaces:
    • Differential horizontal stabilizer
    • Vertical stabilizers with movable and fixed sections and a jettisonable ventral rudder
    • Flaps
  • Extendable upper and lower split-flap speed brakes
  • Landing skids and front gear ("steerable")
  • Movable canopy
  • Cockpit details with astronaut/pilot and animated sticks and levers
  • Experimental equipment on some airplanes (wing-tip pods, tail-cone box, etc.)

SPECIAL VISUAL EFFECTS

  • Over 15 X-15-specific animated visual effects
  • Engine flame and contrail effects
  • Engine first and/or second stage igniter effects
  • Propellant jettison effects
  • APU and turbopump exhaust effects
  • Engine precool and prime effects
  • Condensation effect near the cold propellant tanks when filled

CUSTOM AIRCRAFT SYSTEMS FEATURES

  • Fictional service panel system for external power and aircraft refueling (water-alcohol or ammonia, liquid oxygen, hydrogen peroxide, nitrogen and helium gas, liquid nitrogen)
  • Custom X-15 fuel management system for the three different types of propellants and gases, like in the real-world X-15 rocket plane
  • Engine propellant pressurization and control system
  • Engine turbopump system
  • Engine ignition control system
  • Electrical distribution and control system with APUs, generators, emergency battery and an external power source
  • Hydraulic systems
  • Temperature control systems

ADVANCED 2D PANEL FEATURES

  • Advanced X-15 black (2D) main instrument panels (XLR-11 or XLR-99 engines)
  • Advanced X-15 light blue-gray (2D) main instrument panel (XLR-99 engine)
  • Service panel
  • Left white console panel with "vent, pressurize, jettison" lever and flaps switch
  • Throttle (or thrust selector switches on the XLR-11-equipped aircraft) and speed brake panel
  • Left side panel
  • Right side panel
  • Radio panel (ADF panel on some aircraft)
  • RAS panel (on some aircraft)
  • Center pedestal with research instrumentation and stability augmentation system panels
  • 240 fully functional custom integrated systems and gauges with "tooltips"
  • X-15-1 aircraft kneeboard reference tab and check list
  • 100-page English and French language utility flight manuals with step-by-step procedures (PDF formal, requires Adobe® Acrobat® Reader)

NOTE: Specifications are subject to change without notice.

далее...
ТЕХПОДДЕРЖКА
http://www.xtremeprototypes.com/en/shopcontent.asp?type=support
МЕТОД ДОСТАВКИ
ЗАГРУЗКА ФАЙЛОВ
РАЗМЕР ФАЙЛА
198MB
РЕГИСТРАЦИОННЫЙ КЛЮЧ
Регистрационные ключи выписываются после покупки. Вы сможете их найти в вашей учетной записи.
ЗАГРУЗКА ДЕМО-ВЕРСИИ
ТРЕБОВАНИЯ
  • Flight Simulator: Microsoft® FS2004, FSX (optimized for FS2004, FSX compatible)
  • Windows®: 2000/XP (128 MB RAM)
  • Processor: 450 MHz
  • Hard Drive: 1.8 GB
  • Available Disk Space: 200 MB (space required to install the add-on software and documentation)
  • Video Card: 32 MB (DirectX® 9.0 or later)
  • Other: Sound card and speakers, joystick, Adobe® Acrobat® Reader 5.0 or later
Клиенты купившие этот продукт также покупали
ЛИДЕРЫ ПРОДАЖ
ЗА НЕДЕЛЮ |  ЗА ВСЕ ВРЕМЯ |  ПОСТАВЩИК
Отзывы клиентов
SAMSCENE - SHANGHAI CITY TIMES FSX P3D
yokie
I am amazed by the shanghai city center especially the bund and pudong area, also with acceptable frame rate, whether flying from or landing either the Hongqiao or Pudong airport, now with the shanghai city skyline gives a lot of immersion
WF SCENERY STUDIO - HONG KONG INTERNATIONAL AIRPORT VHHH P3D
Jiekeng
good job! I think this VHHH is better than T2G,nice fps,more detail,great!
FSXCENERY - KSYR SYRACUSE HANCOCK INTERNATIONAL AIRPORT FSX P3D
Andrew
First of all, I would like to thank the developer for the Syracuse Hancock Airport. I feel deeply connected to Syracuse and finger lakes area, so I'm glad I can make few flights to and from this airport. Howev-
er. Just like one of the pilots before me, I think, the price for the quality if too much. I know, the airport has been released some years back, but I had to spend another 5-6 hours working on afcad file (adjusting gates, adding missing airbridges, hazard lights and also apron lights, as these do not show in my sim for some reason). I visited Hancock airport in late Autumn of 2019 during snow blizzards so I was hoping, come winter, I will be able to do some nice winter flights only to discover, that the ground textures are for summer time only! So in order to do winter flights, I had to remove some of the original files and work on landclass from scratch. Not something I was expecting to do after paying for the airport. So, all in all, I took one star for afcad I had to adjust, one for land class I had to do myself and one for lack of winter textures.
PREALSOFT - HD CITIES VIENNA FSX P3D
Douglas
This is a follow up on Vienna and how the developer responded. Although a fix was attempted to make this airport right the developer ran into some issues that were beyond their control, so they did the best they could. The developer was very apologetic and made me the customer a generous gesture, they are not bad guys they just ran into an issue beyond their control. I have almost every one of their sceneries and I can tell you they are not bad. As far as Vienna goes what they offer is still much better than default, so give these guys support, they all work hard. The rating given is for the great response from Prealsoft
RICHER SIMULATIONS - CARIBSKY: TBPB 2020 FSX P3D
Bernhard
This is a very nice scenery and necessary for the Caribean to fly. Even if this is published as "P3Dv4" there is a possibility to get this into P3Dv5 with the help of the developer - update for the config-tool needed and a patch. This all is handled in less than 10 hours. Thumbs up !
HUEYTUNING - PAF890SAR FSX P3D
Simon
This is a very short review of the excellent PAF890SAR repaint. I tried the paint kit by myself, but I wasted 2 weeks of time and at least 60 hours searching for any parts and could not find them. Finally, I gave it up. Designing a white repaint is anyway the hardest task. This pay ware repaint is worlds better than all the default and freeware repaints ever made for the Milviz Huey Uh-1h. I’ve made the effort and was comparing it with MILVIZ default USAF Rescue repaint. Here are just a few details that shows the skills of the artist. 1. The yellow stripe with the registration 66890 and the two blue stripes are designed very exactly around the tail fin. On the default USAF Rescue repaint, the black stripe at the tail fin was only mirrored and looks very loveless. 2.Th-
e PAF890SAR repaint is the only repaint where the landing skids are colored in another separate black tone. 3. It is also very striking that the antenna on the roof is painted in white. 4. The yellow ribbon and every single letter from the vertical lettering has been perfectly adapted to the shape of the body, (that’s a masterpiece) 5-
. Additional maintenance levels have been incorporated with lovely details. 6.The Rescue Angel and the Huey 2 stickers are razor sharp even in highest zoom level. I’m definitely thrilled with the great implementation of this Philippine Air Force rescue helicopter. I will definitely buy the other two repaints. The price may seem a bit expensive at first glance, but hey, try the paint kit yourself and you will quickly realize this PAF890SAR repaint is a masterpiece No doubt, five stars!
PREALSOFT - HD CITIES VIENNA FSX P3D
Douglas
Buyer Beware this scenery has problems and the developer states there is "No Fix" on their end for this. The color of the land class is very washed out and the ground, (land class) loads as you fly directly in front of your plane; it is very annoying and looks and performs bad. How he is allowed to continue to sale this is beyond me!
RDS - RUSSIAN DIGITAL SIMULATIONS - UUEL KONAKOVO AIRFIELD IAHS P3D
David
Very nice airport and surroundings.I think it will need a little more lighting.
RICHER SIMULATIONS - CARIBSKY: TBPB 2020 FSX P3D
Ramon
Being a Concorde fan, Barbados is a MUST HAVE scenery. I had been using a freeware version for years, and I have to admit I was quite happy with it so, the obvious question is, is it worth paying for the update? The developer really deserves the price charged. Barbados is a small airport, but this version is incredibly rich in details. Its quality is second to none, so if you like to invest in high quality sceneries there is no doubt your money will be well invested. As I mentioned, I am Concorde fan and currently I only fly Concorde-X by FSLabs, which requires P3Dv3. At fist, the only surface shown was the runway and there was grass were taxiways and the terminal platform where supposed to be. I contacted the developer, exchanged a couple of emails and in less than 24 hours we solved the problem. In my case what solved the problem was leaving the default directory for the installation (the counter-intuiti-
ve "Prepar3D v4 Add-ons") for the Config tool to work correctly. Otherwise, the "patch" to convert the default P3Dv4 scenery into a P3Dv3 compatible did not work and the problem described before showed. Now that my problem is solved I am a super-happy pilot flying my Concorde in and out Barbados :-)
AFLOSIM - CLUJ-NAPOCA AIRPORT FSX P3D
Jan
Since i flew to Romania last year in real life i really love the country! And i really enjoy the Addons from Aflosim such as Cluj and Bucharest. Very great detail and athmosphere and a very good pricing!!!! I would love to see Timisoara soon!!
ваша страна/область проживания