ПОДЕЛИТЬСЯ
В ПРОДАЖЕ С
07/30/2020
8407
ИЗДАТЕЛЬ
РАЗРАБОТЧИК
АПГРЕЙД
Если вы ранее приобретали AUSCENE - ADELAIDE INTERNATIONAL X FSX simMarket предоставлет право на бесплатный апгрейд. Приобретите этот продукт по нулевой ставке. ВНИМАНИЕ: предложение действует только в случае приобретения с той же самой учетной записи! ВОЗВРАТ НЕ ПРОИЗВОДИТСЯ!Finally Adelaide International X V2.3 (YPAD) has arrived! AUscene is proud to present our latest airport for Australia which is NOW Available for FSX and recently updated for all versions of Prepar3D (V1-V5)
Adelaide finally fills a gap that has been missing ever since FSX and P3D were released, capable of handling 777’s right down to Dash 8’s and GA aircraft you’re bound to enjoy flying into Adelaide. On top this this Adelaide is only a short flight from Brisbane, Sydney or Melbourne so you have plenty of routes to utilise Adelaide on. We developed the airport on the foundation of a high definition aerial photo combined multiple layers of high resolution details to bring the airport to life. The night lighting is something amazing to see, you’ll notice our rendered effects causing even windows to cast light on the ground!
Adelaide International X is now updated to V2.3 and is available FREE for all existing customers, what are you waiting for? Adelaide International X V2.3 brings compatibility for the latest Prepar3D versions as well as adding support for GSX and Dynamic Lighting!
Feature list;
- Now Compatible with all versions of Prepar3D
- Custom Ground Poly
- GSX Compatible including SODE Jetways (FSX / Prepar3D)
- Dynamic Lighting (Prepar3D V4-5)
- Hand crafted representation of YPAD, built from the ground up for FSX and P3D
- Highly detailed custom ground layer with high-resolution texture details
- Detailed Terminal and Aerobridges with high resolution textures
- Animated Runway Guard Lights
- Realistic PAPI, Runway and Taxiway lights.
- Enhanced and accurate rendered night-lighting
- 30cm/pixel High Resolution Aerial Image
- Accurate placement of buildings and vegetation within the airport grounds
- Modelled grass and shrubs
- High resolution hand painted textures
- Working Navaids (ILS, VOR/DME, NDB)
- Animated road traffic around the airport
- Accurate Gate Assignments
- Ready to go and compatible with default and most AI Traffic Programs
- Dynamic Airport Environment
Extra files are included if you wish to add even more detail and with easy and fast installation will have you flying in no time.
Compatible with default FSX / Prepar3D and has been tested with FTX Australia products
Ø от 12 Отзывы клиентов
Напишите свой отзыв!
Напишите свой отзыв!
Языковой фильтр:
- Все (12)
-
English (12)
-
Deutsch (0)
-
Francais (0)
-
简体中文 (0)
-
русский (0)
Фильтр по рейтингу:
Последние отзывы:
Christian
*Владеет продуктом*
08/27/2022
Upon reviewing your product in P3DV5 all i can say is there should be no price tag for this airport.
Firstly the installation of this product is clunky with files going in different folders and the user needing to use manual user input to move files, extract files and add the scenery to P3D.
Secondly the quality of this product is plain with the ground textures looking blurry and low res quality. This airport recreation is also very outdated compared to the current airport with new building needing to be added and new taxi signs.
The most annoying aspect of this version of Adelaide P3DV5 is it could actually be such a great product. What you have done for MSFS for this airport is outstanding and for the price tag I will be absolutely picking it up for MSFS.
In closing for a user who has been flying in P3D for over 6 years this airport for P3D should be heavily marked down or FREE as its not worth buying for P3DV5.
I would also appreciate if you could not delete this review comment as stated right here
(We reserve the right to delete or not publish your review without further notice.)
I have copied this comment in which I will post again if necessary.
Kind regards
Firstly the installation of this product is clunky with files going in different folders and the user needing to use manual user input to move files, extract files and add the scenery to P3D.
Secondly the quality of this product is plain with the ground textures looking blurry and low res quality. This airport recreation is also very outdated compared to the current airport with new building needing to be added and new taxi signs.
The most annoying aspect of this version of Adelaide P3DV5 is it could actually be such a great product. What you have done for MSFS for this airport is outstanding and for the price tag I will be absolutely picking it up for MSFS.
In closing for a user who has been flying in P3D for over 6 years this airport for P3D should be heavily marked down or FREE as its not worth buying for P3DV5.
I would also appreciate if you could not delete this review comment as stated right here
(We reserve the right to delete or not publish your review without further notice.)
I have copied this comment in which I will post again if necessary.
Kind regards
Damian
*Владеет продуктом*
02/19/2022
Well I was in contact with the developer before i bought this regarding the reduced detail of the apron. I though and was told it was reduced, however when i bought and installed it i didn't think it was that reduced in detail. That the default apron textures when editing the AFCAD file in ADE were 100% better.
What also alarmed me that the detailed was reduced big time. Was when i installed both P3D3 and P3D4. I noticed their was a 30kb difference in the AFCAD.bgl file sizes. While I require my sceneries to be functional more that looking real life like. This scenery was even below what i would expect visually.
I also had to edit the AFCAD file and select the DME tick box so the ILS works properly. This is something a good 3rd party developer should not miss. Also when a scenery like this is developed the below should always be functional.
1) Jetways (SODE)
2) VDGS - (SODE)
3) Apron/airport detail.
The above would not take much effort from a 3rd party developer who is experienced like AUscene. It should not fall down to the end user to make them work or function correctly, and or appear more life like rather than a photo.
NOTE: I purchased and download YPAD when it was v2.2. I have noticed prior to writing this that YPAD is now at v2.3.
However I don't think YPAD was ready when it was released, and if v2.3 has not fixed the apron issue at least. Then i will be asking for my money back as it was not worth 22.99 AUD, which is what i paid for it.
Regards
Damian
What also alarmed me that the detailed was reduced big time. Was when i installed both P3D3 and P3D4. I noticed their was a 30kb difference in the AFCAD.bgl file sizes. While I require my sceneries to be functional more that looking real life like. This scenery was even below what i would expect visually.
I also had to edit the AFCAD file and select the DME tick box so the ILS works properly. This is something a good 3rd party developer should not miss. Also when a scenery like this is developed the below should always be functional.
1) Jetways (SODE)
2) VDGS - (SODE)
3) Apron/airport detail.
The above would not take much effort from a 3rd party developer who is experienced like AUscene. It should not fall down to the end user to make them work or function correctly, and or appear more life like rather than a photo.
NOTE: I purchased and download YPAD when it was v2.2. I have noticed prior to writing this that YPAD is now at v2.3.
However I don't think YPAD was ready when it was released, and if v2.3 has not fixed the apron issue at least. Then i will be asking for my money back as it was not worth 22.99 AUD, which is what i paid for it.
Regards
Damian
Dominik
11/28/2021
From the distance it looks good, as it blends well into ORBX AU, and the ground colors are OK. There's nothing "wrong" with the scenery such as bugs... but it's simply not really good. Textures look pretty artificial, there are no SODE gates, not even standard moving gates, and the jetways themselves really look very very outdated. And so do terminals. What's more: The AFCAD needed some editing, so that the airliners really appeared at the gates, and not at the GA parking spots.
Yes, there is no other YPAD scenery out there for P3d, so it's OK. It's simple and flyable without a problem. But it's definitely one of the weaker AU sceneries, and certainly not the one I would choose in the first place, if it doesn't have to be exactly YPAD.
Yes, there is no other YPAD scenery out there for P3d, so it's OK. It's simple and flyable without a problem. But it's definitely one of the weaker AU sceneries, and certainly not the one I would choose in the first place, if it doesn't have to be exactly YPAD.
Ajit
*Владеет продуктом*
04/13/2021
I bought it being the only Adelaide scenery out there, the buildings aren’t bad but its not really the quality one is used to in p3dv5 but it’s acceptable. The biggest issue is the ground poly which is basically not there if you have Australia V2 its horrific. I’ve been told when I emailed that an update is coming... hasn’t come yet. Will update stars when or if it comes out.
Peter
*Владеет продуктом*
04/08/2021
Bought this in Sep 2020. The developer sent me an email which said the ground poly for Adelaide was made for FSX and was currently just ported over for P3D V4&5 compatibility. The email suggested that they were going to rebuild the ground polys specifically for V4&5, but that's not happened in the last 6 months. Happy to add more stars when they follow up on this.
Alex
*Владеет продуктом*
01/09/2021
I’m grateful for any Australian scenery - there’s not enough of it. This scenery is ok and I do I enjoy using it (thank you :-), but IMHO it’s not of a comparable standard to sceneries from a lot of other P3Dv5 developers in this price range. I would encourage the developer to continue enhancing/developing this scenery with higher res textures (current textures around the airport are very low res) and I look fwd to seeing a V2.3 or v3.0.
BEN
*Владеет продуктом*
12/08/2020
The quality looks really poor and defently not P3d v5 standards. This looks more like FS2004 standars i am really disapointed to pay so much money for this airport.
Georg
*Владеет продуктом*
10/09/2020
What a nice scenery, worth the money (especially as "nice price")! I'm not really familiar with the airport scenery in reality - isn't there any airport inscription showing the traveller you have arrived at "ADELAIDE"?
Four stars .... mightbe there are always some whishes left!
Four stars .... mightbe there are always some whishes left!
Paul
*Владеет продуктом*
08/09/2020
Its great that the guys from AUscene acted on my email about replacing the static jetways hats of to them for listening. Its a great product
Lee
*Владеет продуктом*
08/05/2020
This is an UPDATE to my earlier review of 1st August 2020 - I have been contacted by the Developer to say that they have now added SODE Jetways for GSX users which is excellent! They also appear to have been having complaints about the scenery due to my review. I will state and reiterate again - YOUR RESULTS MAY VARY! But most if not ALL airport sceneries are layered ABOVE everything default (Layer 1 descending). So Adelaide could easily be layered at the top (1) and all should be well. But in doing this, on my system, much of the scenery disappeared! My advice is to install the product and allow it to add to the library and then test the scenery. If you do not see the treeline surrounding the airport or do not see the patchy, grassy airport environs and are greeted by a bland light brown tarmac, then this has happened to you! Just change the scenery layer and it should all be fine. Lee James - 05 AUG 2020
далее...
ВЕБ-САЙТ
ТЕХПОДДЕРЖКА
РАЗМЕР ФАЙЛА
743MB
ТРЕБОВАНИЯ
FSX, Prepar3D V1, V2, V3, V4, V5
GSX Level 2 is required for SODE Jetways
ЯЗЫК
English
РАЗРАБОТЧИК
AUscene
Клиенты купившие этот продукт также покупали
![S-DESIGN - SOCHI INTERNATIONAL AIRPORT [URSS] (RUSSIA) MSFS](images/products/6/6c/15278/_-1.jpg)
