• SIGNALSOFT - POST T HENGELO
  • SIGNALSOFT - POST T HENGELO
  • SIGNALSOFT - POST T HENGELO
  • SIGNALSOFT - POST T HENGELO
  • SIGNALSOFT - POST T HENGELO
  • SIGNALSOFT - POST T HENGELO
  • SIGNALSOFT - POST T HENGELO
  • SIGNALSOFT - POST T HENGELO

Post T Hengelo

After the great success of Post T Arnhem 1965, Signalsoft now brings out a brand new simulation in the Post T Series of GRS-NX simulations. This time you don’t have to sit all alone on the job! You have the ability to open up a Dispatcher Office with other fellows online via the servers of Signalsoft Rail Consultancy Ltd. or via a direct link to your colleagues!

The GRS-NX Simulation of Post T Hengelo jumps a huge leap forward from the last version. The Power Signal Box in Hengelo was the longest of its type in the Netherlands and had quite a load of train traffic. The timetable is from the year 1999/2000, just before the panel was decommissioned. The timetable offers next to a fixed hourly pattern a great variation of through freight trains over the border to Germany, local freight and of course all the things that will cause delays. It’s your task to dispatch all things properly and lead your traffic safely through the area.

What’s included in the GRS-NX Simulation Post T Hengelo:

• Exact copy of the GRS-NX panel CTC functions
• VCVL (Vereenvoudigde Centrale Verkeersleiding=simplified CTC) (Mariënberg-Vroomshoop)
• 5 Stations
• 6 stopping places on the lines
• 32 platform tracks
• 225 km track length
• 153 signals
• 162 switches/points/turnouts
• 381 track sections
• 67 Level Crossings (Aki’s, Ahob’s, Aob’s)
• 500+ trains in the timetable
• 1000+ movement orders
• 610 routes
• Stop/Through operations for level crossings
• Issue Written Orders to drivers for level crossings
• Delegate issuing of written orders to despatch operators on the platforms
• Level Crossing defects
• Overhead Line Equipment operations (substations, distribution stations, connectors)
• Telerail (trainradio)
• CPZ-box (telephone)
• Platform Information Devices (PID’s)
• PID operation equipment with “Krone” punch card reading system
• Train Descriptor system (TNV)
• Dispatcher Screens (VKL)
• Modern Dispatching Time-Way Diagram with dynamic functions and conflict management
• Post 21 Track Occupation Diagram with conflict management
• Local Operations Areas
• Switch Lock local operation
• Dispatcher Office (“Multiplayer”) with up to 5 participants on one panel!

Now we can tell you a lot here, but the best thing is to try out the demo version! The demoversion does all what the full version can do, except:

  • You cannot load and save the simulation session
  • You cannot work more than 20 minutes
  • You cannot start a multiplayer session

Very important: in the demo version you can follow the in-simulation learning session about how to operate the basics for route setting and the simplified CTC operations (VCVL)

You also are able to review all timetable data and print it out if you wish.

Here’s a map of the Hengelo Area:

http://www.signalsimulation.com/manuals/Post_T_Hengelo_Overview.pdf

The complete overview over tracks, signals and catenary groups:

http://www.signalsimulation.com/manuals/Post_T_Hengelo_High_Res.pdf

The hourly pattern of the timetable is here:

http://www.signalsimulation.com/manuals/PostTHengeloPattern.pdf

Here you have the full manual:

http://www.signalsimulation.com/manuals/Post_T_Hengelo_Manual.pdf

Here is a little task list, about what to do when and why:

http://www.signalsimulation.com/manuals/Post_T_Hengelo_TaskList.pdf

Here is the link where you can download the demoversion of Hengelo:

http://www.signalsimulation.com/downloads/Post_T_Hengelo_DEMO_Setup.zip

System Requirements:

  • Windows XP, Windows Vista or Windows 7 (32 or 64 Bit versions)
  • 32 MB Graphic Card
  • Sound Card
  • 512 MB Memory
  • Pentium 1.7 GHz
  • 200 MB free on hard disk

Advisable to have:

  • Wide screen monitor (1680 x 1050)
  • Printer

Extras

If you register this product with the registration key at www.signalsimulation.com/registration , you will receive within 48 hours a license key that allows you to use extra features. (user access to the timetable database and free updates) Registration is not required for this product to work, but we do encourage you to register.

lire plus
POSSIBILITES DE LIVRAISON
TÉLÉCHARGEMENT DIRECT
FICHIER
27MB
CLÉ D'ENREGISTREMENT
Clé d'enregistrement après achat, regardez la page détails de commande dans votre compte client.
TÉLÉCHARGER DEMO
NECESSITE
  • Windows XP, Windows Vista or Windows 7 (32 or 64 Bit versions)
  • 32 MB Graphic Card
  • Sound Card
  • 512 MB Memory
  • Pentium 1.7 GHz
  • 200 MB free on hard disk
Les clients qui ont acheté cet article ont également acheté
Commentaires client
FSXCENERY - KSYR SYRACUSE HANCOCK INTERNATIONAL AIRPORT FSX P3D
Andrew
First of all, I would like to thank the developer for the Syracuse Hancock Airport. I feel deeply connected to Syracuse and finger lakes area, so I'm glad I can make few flights to and from this airport. Howev-
er. Just like one of the pilots before me, I think, the price for the quality if too much. I know, the airport has been released some years back, but I had to spend another 5-6 hours working on afcad file (adjusting gates, adding missing airbridges, hazard lights and also apron lights, as these do not show in my sim for some reason). I visited Hancock airport in late Autumn of 2019 during snow blizzards so I was hoping, come winter, I will be able to do some nice winter flights only to discover, that the ground textures are for summer time only! So in order to do winter flights, I had to remove some of the original files and work on landclass from scratch. Not something I was expecting to do after paying for the airport. So, all in all, I took one star for afcad I had to adjust, one for land class I had to do myself and one for lack of winter textures.
PREALSOFT - HD CITIES VIENNA FSX P3D
Douglas
This is a follow up on Vienna and how the developer responded. Although a fix was attempted to make this airport right the developer ran into some issues that were beyond their control, so they did the best they could. The developer was very apologetic and made me the customer a generous gesture, they are not bad guys they just ran into an issue beyond their control. I have almost every one of their sceneries and I can tell you they are not bad. As far as Vienna goes what they offer is still much better than default, so give these guys support, they all work hard. The rating given is for the great response from Prealsoft
RICHER SIMULATIONS - CARIBSKY: TBPB 2020 FSX P3D
Bernhard
This is a very nice scenery and necessary for the Caribean to fly. Even if this is published as "P3Dv4" there is a possibility to get this into P3Dv5 with the help of the developer - update for the config-tool needed and a patch. This all is handled in less than 10 hours. Thumbs up !
HUEYTUNING - PAF890SAR FSX P3D
Simon
This is a very short review of the excellent PAF890SAR repaint. I tried the paint kit by myself, but I wasted 2 weeks of time and at least 60 hours searching for any parts and could not find them. Finally, I gave it up. Designing a white repaint is anyway the hardest task. This pay ware repaint is worlds better than all the default and freeware repaints ever made for the Milviz Huey Uh-1h. I’ve made the effort and was comparing it with MILVIZ default USAF Rescue repaint. Here are just a few details that shows the skills of the artist. 1. The yellow stripe with the registration 66890 and the two blue stripes are designed very exactly around the tail fin. On the default USAF Rescue repaint, the black stripe at the tail fin was only mirrored and looks very loveless. 2.Th-
e PAF890SAR repaint is the only repaint where the landing skids are colored in another separate black tone. 3. It is also very striking that the antenna on the roof is painted in white. 4. The yellow ribbon and every single letter from the vertical lettering has been perfectly adapted to the shape of the body, (that’s a masterpiece) 5-
. Additional maintenance levels have been incorporated with lovely details. 6.The Rescue Angel and the Huey 2 stickers are razor sharp even in highest zoom level. I’m definitely thrilled with the great implementation of this Philippine Air Force rescue helicopter. I will definitely buy the other two repaints. The price may seem a bit expensive at first glance, but hey, try the paint kit yourself and you will quickly realize this PAF890SAR repaint is a masterpiece No doubt, five stars!
PREALSOFT - HD CITIES VIENNA FSX P3D
Douglas
Buyer Beware this scenery has problems and the developer states there is "No Fix" on their end for this. The color of the land class is very washed out and the ground, (land class) loads as you fly directly in front of your plane; it is very annoying and looks and performs bad. How he is allowed to continue to sale this is beyond me!
RDS - RUSSIAN DIGITAL SIMULATIONS - UUEL KONAKOVO AIRFIELD IAHS P3D
David
Very nice airport and surroundings.I think it will need a little more lighting.
RICHER SIMULATIONS - CARIBSKY: TBPB 2020 FSX P3D
Ramon
Being a Concorde fan, Barbados is a MUST HAVE scenery. I had been using a freeware version for years, and I have to admit I was quite happy with it so, the obvious question is, is it worth paying for the update? The developer really deserves the price charged. Barbados is a small airport, but this version is incredibly rich in details. Its quality is second to none, so if you like to invest in high quality sceneries there is no doubt your money will be well invested. As I mentioned, I am Concorde fan and currently I only fly Concorde-X by FSLabs, which requires P3Dv3. At fist, the only surface shown was the runway and there was grass were taxiways and the terminal platform where supposed to be. I contacted the developer, exchanged a couple of emails and in less than 24 hours we solved the problem. In my case what solved the problem was leaving the default directory for the installation (the counter-intuiti-
ve "Prepar3D v4 Add-ons") for the Config tool to work correctly. Otherwise, the "patch" to convert the default P3Dv4 scenery into a P3Dv3 compatible did not work and the problem described before showed. Now that my problem is solved I am a super-happy pilot flying my Concorde in and out Barbados :-)
AFLOSIM - CLUJ-NAPOCA AIRPORT FSX P3D
Jan
Since i flew to Romania last year in real life i really love the country! And i really enjoy the Addons from Aflosim such as Cluj and Bucharest. Very great detail and athmosphere and a very good pricing!!!! I would love to see Timisoara soon!!
LATINVFR - SAN DIEGO KSAN V2 FSX FSXSE
Leo
This is my second LatinVFR scenery and is completely awsome. I love how accurate is the depiction of this airport and it come with downtown San Diego too, the textures used are incredible with a good attention to details. It comes with a scenery configurator to change some elememts of the scenery like add/remove static objects, add/remove downtown San Diego and more. The FPS dont drop a all or maybe just a little bit and it runs smooth with no problem at all. Im surprise by the great performance it has on my simple HP laptop. The night textures inside the airport are really good but the night textures of the city are interesting because it doesnt look as illuminated as the default FSX/P3D textures but looks more realistic and I like it. Overall this scenery is a great scenery for KSAN and worth every penny. 100% recommended.
FSXCENERY - HKMO MOI INTERNATIONAL AIRPORT MOMBASA FSX P3D
MR ANSELM J
This definitely is a great place to fly to the airport is very nicely designed and well equipped with ground stuff I'm very pleased with this product definitely 5stars for this very well done to the scenery team on yet another great scenery package;) :)
Votre pays/région de résidence