Brand new cockpit textures optimized for X-plane 12
Choice of 2 engine types: PW1127G-JM and CFM LEAP1A26
Custom EFB with Avitab integration, weight and balance computer, take off and landing performance as well as interactive check list
ACARS functionality: SimBrief flight plan import directly into the FMGS, TO Performance computations and wind upload.
Hoppie CPDLC and PDC functionality including weather download from the Hoppie network
Implementation of over 130 circuit breakers to cut power to certain systems.
More than 210 failure modes that can be injected, including “resettable” failures.
Can still run in X-plane 11 with most of these features, except for the XP12 specific rain effects
Reversable back up speed scale (BUSS)
Detailed list of features:
Highly complex FMGS:
SID/STAR and airways support in a fully custom FMGS backbone supporting all A424 leg types (Arc, course or heading to intercept, Radius to Fix, Holdings, etc.)
Active, alternate, 2 temporary as well as secondary flight plans
2 completely independent MCDUs and autopilots
Pilot item database for custom fixes, navaids, flight plans and runways
Full VNAV guidance with TOC, TOD, Deceleration point, speed limits, fuel prediction, and consideration of speed and altitude constraints etc.
Support for go-arounds and diversions
Step altitudes
Offset function
Direct To function including abeam points, radial in and radial out
Hold function including computed and database holds as well as pilot defined holds
Satellite availability model, including prediction for specific places and times
Nav Aid autotuning
Flight plan saving via the Pilot routes page
Equitime point computation
Nearest airports page
Airways function including automatic computation of intersection point between two airways
Fix info functionality to create reference circles or bearings
ACARS function to simulate flight plan, TO Data and Wind upload from ground station using SimBrief data.
SLS/GLS and FLS type approaches
RNP-AR capability
Accurate systems:
ToLiss Fly-by-wire and autopilot module, with support for Alternate and Direct Law
Unique feature: Control Surface hinge moment modelling allows the surfaces to float to the appropriate position after loss of all actuators on a surface or to not reach full deflection if running on a single actuator.
Fault injection interface allowing to inject custom selected failures, or randomly selected failure based on fault probabilities with over 210 failure modes available.
Custom TCAS with resolution advisory function.
Terrain on ND and Weather radar available (WX radar works with default X-plane weather engine)
Brake temperature model based on the detailed physics of heat transfer between the individual brake components
Hydraulics model with proper hydraulic flow computation as function of surface motion, flap/slat motion, gear extension etc. You will see this by the pressure dropping when flying on RAT
Custom engine model for accurate thrust and fuel flow modelling including oil pressure and temperature model as well as many engine failure modes. Thrust and fuel flow modelled for each engine type. Special engine logics, such as dual cooling on the PW1127G engine are also modelled.
Detailed model of each ADIRU including alignment, small pressure sensor differences between the units, switching of sources for PFDs and Aps
Quantitative bleed system modelling affecting engine fuel flow
Electrical system simulation with correct bus reconfiguration and load distribution, simulated electrical transients as well as emergency generation from the blue hydraulic system.
Fire detection simulation for engines and APU
Custom radio navigation computations including ability to perform backup RADNAV tuning through the RMPs
Custom air conditioning model supporting high altitude operations at airports like Cusco in Peru or La Paz in Bolivia without spurious warnings
Flight warning system with ECAM actions supporting numerous system failure scenarios, e.g. engine failures, generator failures, hydraulic failures.
Custom indicating system including DMC and SDAC simulation.
Choice between Multifunctional runway lights or the classic landing light configuration.
Eye- and ear-candy:
Detailled 3D cockpit
Opening side windows
Animated tray tables
Moving cockpit seats
Animated ground services for refuelling, pushback and deicing as well as cargo baggage loaders
3d exterior model with PWG and LEAP engine
Custom sounds from Turbine Sound Studios (TSS) included for all engines
Integration of X-plane 12 native rain effects.
Useability features:
Situation loading and saving. It is possible to save the flight at any point in time and resume it another day. This can also be used, e.g., to save the position just before approach and practice just the approach many times. This feature reinstates the complete aircraft state (except communications with ATC, such as AOC and CPDLC messages or ground service states.)
Autosaving allows recovering where you left off, should the X-Plane session end unexpectedly.
Jumping waypoint-to-waypoint through the cruise phase: Shorten your flight to focus on the more interesting parts as you like.
Integrated takeoff performance calculator supporting the use of flex temperature.
4 different start-up configurations from Cold and Dark to engines running and ready to go
In-screen popup displays or use of x-plane windows for popups
Interactive audio control panel to change ground services, fuel, loading, passengers etc. without breaking immersion
Electronic flight bag on both sides with Avitab integration, weight and balance computation, take-off and landing performance calculator as well as a user customizable interactive checklist.
Print function for AOC messages, CPDLC messages and selected FMGS functions
Requirements
Works in X-plane 11 and X-plane 12
Windows, Linux or Mac
4GB VRAM or more required
Not for commercial use. For any commercial use enquiries, please contact support@toliss.com