FSX 至 PREPAR3D 迁移工具
FSX 至 PREPAR3D 迁移工具
EUR 10.04 
$
£
¥
  • FSX 至 PREPAR3D 迁移工具
  • FSX 至 PREPAR3D 迁移工具
上架日期: .
05/06/20126365
出版商
销售人

Migrating to a new flight simulator has never been so easy!

From the early days of flight simulation, each new simulator has meant the need to replace almost all addons with new ones, often at a high cost, and in many cases no upgrades have been available at all.

FSX to Prepar3D Migration Tool is a revolutionary tool that allows you to install Flight Simulator X (FSX) addons to Prepar3D. Since there are very few differences between the two simulators, almost everything that functioned properly in FSX will function so in Prepar3D.

No manual editing is necessary, nor it is necessary to have FSX present on the computer. Just install the tool, follow its manual and install addons like you would install them to FSX. Everything from freeware Pipers to the most complex addons will appear in Prepar3D.

With Migration Tool, you will be able to enjoy the best of both worlds – excellent FSX addons in new and evolving Prepar3D flight simulator.

How does it work?

Migration Tool creates a virtual FSX installation, meaning that it will turn an empty folder of your choice into looking like FSX root folder, with all necessary configuration files present. Everything installed there - no matter if by hand or using installers - will appear in Prepar3D.

Virtual FSX installation has numerous work-arounds helping installers and utilities find necessary files. For example: using Migration Tool, owners of EZdok Camera Addon can even get their TrackIR running with Prepar3D.

To avoid conflicts with FSX, should you have it installed, there is a simple user interface to enable and disable virtual FSX with a single click. While it is disabled, FSX addon installers will place files into real FSX. While enabled, FSX addon installers will place files into Prepar3D.

Migration Tool has been tested with many popular sceneries, aircraft and utilities. As long as they don’t rely on dirty hacks and follow practices suggested by Microsoft and Lockheed Martin instead, they will work properly in Prepar3D.

Requirements

  • Lockheed Martin Prepar3D simulator must be installed. Flight Simulator X is not required, but may be installed.
  • Supported operating systems:
  • Windows XP (32 bit only, and at least SP2),
  • Windows Vista (32 and 64 bit),
  • Windows 7 (32 and 64 bit).
  • Administrator privileges are required to install and use the tool.
  • One-time activation is required. Both online and offline activation are available.
  • Once installed, the tool uses about 10 megabytes of disk space.
浏览详情
产品支持联系方式
论坛/常见问题
文件大小
2MB
注册密钥交付方式
购买后获得注册密钥,请登录顾客账户,进入订单详情页面查看密钥。
免费试用
请先下载、安装并试用DEMO版程序,检查软件功能!
DEMO版程序即是本产品的正式安装程序,除DEMO外没有其他安装程序可供下载!
DEMO下载地址
PRODUCT DOWNLOAD: http://www.flightsim.ee/products/migration-tool#download

First download and install the demo version and check functionality!
The demo version is the product installation file; there is no other download!

MANUAL DOWNLOAD: FSX support for Prepar3D manual
注意事项
产品激活时需有可用的网络连接
使用需求
  • 模拟平台:必须安装有 洛克希德马丁 Prepar3D, FSX 并非必须,但系统必须支持FSX的安装
  • 支持的操作系统有:
  • Windows XP (仅支持 32位, 至少升级至 SP2)
  • Windows Vista (32 及 64 位)
  • Windows 7 (32 及 64 位)
  • 安装和运行本产品时必须使用管理员身份/权限
  • 安装后需要激活本产品,同时支持在线和离线安装
  • 安装后本产品约占用 10 MB 硬盘空间
购买了该商品的顾客还买了
购物车
0件商品
余额: EUR 0.00
作者&出版商
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
0...9
客户评价
WF SCENERY STUDIO - 中国-昆明长水国际机场 ZPPP P3D4
chen quan
发布后第一时间下载安装,整体品-
质不错!由于我用的是老版本4.-
3,所以无法使用。后来制作组耐-
心指导升级到4.5后就正常了。
WF SCENERY STUDIO - 中国-昆明长水国际机场 ZPPP P3D4
Jiekeng Luo
地景确实很精细,帧数也很友好,-
wf制作越来越好了,希望更多好-
的国内地景,为什么评论也要50-
字,不够50字,够了够了够了
A_A SCENERIES - 中国-北京首都国际机场 ZBAA FS2004
zepei zhu
虽然有很多不足,但是能支持FS-
9就已经是最好的了。。。。。。-
另外有一个BUG在西雅图3-
4R会出现一根北京的灯柱
BRIDGE - 中国-成都双流国际机场 ZUUU P3D
禹 陆
my first time to buy a BRIDGE procution, good as real!
A_A SCENERIES - 中国-北京首都国际机场 ZBAA FSX P3D
Chen Ziwei
1.AA-ZBAA停机位确实很-
准, 各个航司的AI机停的都挺准! -
2.AA-ZBAA帧数确实比-
WF-ZBAA的高不少(AI机-
100%),达到了友好的级别(-
i5-9600K @4.4G + 32G-3600 + 2080)。WF-ZBAA在某-
些角度地面贴图确实会变回默认贴-
图或者某些位置会crashes-
3.动态灯光AA-ZBAA-
有些机位也存在过亮的问题 ,需要自己根据手册调整。
FLYFREESTD - 苏霍伊 SU-33 侧卫-D P3DV4
先生 任
机模还是相当不错,还有中国歼--
15,就是没有驾驶舱电门说明,-
使用不方便。另外还可以着陆辽宁-
舰。The machine model is quite good, and there is China fighters15, but there is no cockpit switch, it is not convenient to use.It can also land on the liaoning.
DAZZLE COLOUR GAME CO.,LTD. - 中国-乌鲁木齐-地窝堡国际机场 ZWWW FSX P3D
Rustam Mmdely
上线太着急。问题比较多,廊桥位-
置接的不对,跑道道肩尺寸不对,-
灯具位置太离谱,07跑道头多了-
个一个VOR台,问题还有很多,-
如果发布前作者有好好看看自己的-
作品,他肯定能发现问题,但是就-
这样草草发布了。期待以后作者能-
耐心解决。
A_A SCENERIES - 中国-北京首都国际机场 ZBAA FSX P3D
Qiang ZHANG
超级好的地景,几乎完全体现了现-
实的感觉,期待更多中国机场的地-
景!运行起来基本不卡顿很流畅!-
感谢制作组!
WF SCENERY STUDIO - 中国-郑州新郑国际机场 ZHCC P3D4
Zou YiFan
整体来看,插件质量总体较高,随-
季节变化的地面效果好评,不过部-
分细节还是有点怪,感觉还能进一-
步优化,比如地面的贴图细看感觉-
很奇怪,30L跑道中段有隐形的-
碰撞(已经试过删除0902里面-
相关所有文件),可能还需要WF-
进一步优化。帧数应该比WF原来-
的几个插件进一步优化了,帧数总-
体应该和桥哥的成都在一个层面了-
,值得鼓励,希望能有更多国内机-
场的优秀插件
BRIDGE - 中国-成都双流国际机场 ZUUU P3D
Jason Zhong
BRIDGE is always best,don't think any more,buy it!!!
您居住的国家或地区