Following on from their popular Hawk T1/A Advanced Trainer and PA-28 family of aircraft for MSFS, Just Flight's in-house team has developed this highly detailed simulation of the 146 regional jet following comprehensive, hands-on research with a real-world aircraft, G-JEAO, which retired from service with British European Airways in 2000 and is now preserved at the de Havilland Aircraft Museum, and the CC.Mk2 and C.Mk3 aircraft of Royal Air Force, 32 (The Royal) Squadron.
Just Flight are excited to bring you the 146 ‘Whisper Jet’ – featuring the 100, 200 and 300 series of this classic British airliner. The design process of what was to become the 146-100 began under Hawker Siddeley in 1973, when the iconic high T-tail, short undercarriage, four engines and distinctive airbrake were chosen to produce a regional airliner with short-field performance and quiet operation. The 146-100 first flew in 1981, followed by the stretched 200 series in 1982 and the 300 series in 1988.
The Royal Air Force purchased three 146-100s in 1986 and these were operated by The Queen's Flight, designated the CC.Mk2 ‘Statesman’ and equipped with VIP cabins. The aircraft were used to transport the British royal family and senior members of the UK military and government.
The 146 was also popular with cargo operators due to its excellent capacity and low engine noise, allowing for night flights into city airports. Two cargo variants were developed: the convertible passenger and freight variant (QC) and the freight-only Quiet Trader (QT). The Royal Air Force also operated two 200QC aircraft, designated the C.Mk3.
Eight variants of the 146 are included in this product – the 100 to 300 passenger variants, the 200QC and QT, 300 QT, RAF CC.Mk2 ‘Statesman’ and C.Mk3 – offering a wide variety of configurations, ranges and flight operations across the globe.
The exterior models are stunningly detailed, featuring 8K and 4K textures for incredible clarity and the latest Physical Based Rendering (PBR) material technology to produce realistic metallic, plastic and glass surfaces. Realistic animations include trailing-edge flap mechanisms, spoilers, large tail-mounted airbrake and all passenger and cargo doors.
The Captain and First Officer positions in the cockpit are modelled with hundreds of functional switches, knobs and controls. The aircraft features complex custom-coded systems based on real-world FCOMs, including hydraulic, electrical, fuel and pressurisation, and the cockpit is also fitted with a functional Thrust Management System (TMS) and comprehensive navigation equipment which includes traditional navigation equipment for tracking VORs, NDBs and ILSs, as well as two types of FMS for RNAV navigation.
The aircraft are brought to life with immersive dynamic lighting and 3D Wwise sounds, with unique flight dynamics for each variant and custom effects from condensation and contrails to realistic exterior lighting.
The 146 was flown all around the world and over 40 airline liveries from the UK, USA, Europe and Australia are included, bringing you many iconic airlines and paint schemes.
New features - the 146 Professional has received many significant updates/upgrades since the original release, with a plethora of changes being made to the aircraft systems and visuals, as well as extra features and quality-of-life additions based on community feedback. This all ensures that the 146 Professional is one of the most complete products available for MSFS! The free 'Version 2' update (4 April 2024) adds even more features, including fully interactable passenger cabins, a UNS-1 Flight Management System and boarding simulation. A video covering these latest additions can be viewed here.
Video playlist - a video playlist of the 146 Professional tutorial and feature overview videos can be found on the Just Flight YouTube channel.
VARIANTS
Eight variants of the 146 are included:
146-100
146-200
146-300
146-200 QC & QT (cargo)
146-300 QT (cargo)
CC.Mk2 (RAF VIP configuration with countermeasure pods)
C.Mk3 (RAF cargo configuration with countermeasure pods)
MODEL
Accurately modelled using real-world aircraft plans and comprehensive photography of the real aircraft (G-JEAO, ZE701 and ZE708)
Numerous animations, including:
- Trailing edge flap surfaces
- Wing-mounted spoilers and tail-mounted airbrake
- All passenger, service and cargo doors, and integral airstairs
- Windscreen wipers
- Distinctive retractable tricycle landing gear
- Countermeasure pods, HF aerial and more
Physically Based Rendering (PBR) materials produce realistic metallic, plastic and glass surfaces
4K and 8K textures are used to produce the highest possible texture clarity
Authentic labelling and placards based on those found in the real aircraft, with decals used for high-resolution text
Ground services support (marshaller, fuel truck etc.)
Full support for MSFS visual icing effects
Highly detailed and fully simulated passenger and cargo cabins
COCKPIT
Captain and First Officer positions are modelled with hundreds of functional switches, knobs and controls. Even the pilot and observer seats, cup holders and sun visors are functional!
A truly 3D cockpit environment right down to accurately modelled seat belts and screw heads - every instrument is constructed fully in 3D with smooth animations
Cockpit textures feature wear and tear based on reference photos taken in the real aircraft to produce an authentic environment
Aircraft state system which will automatically save the aircraft state whenever a flight is saved and reload it whenever that flight is loaded
Aircraft configuration system which allows you to choose between 'Cold & Dark', ‘Turnaround’ or 'Ready for Take-off'
Many features have been added to help with usability such as the ability to hide the control yokes for a better view of the instruments and pre-set camera views for the overhead panel, centre pedestal and jump seat, hidden clickspot for setting all altimeters to standard and controlling all four N1 and TGT bugs, and automatic ground idle selection
Developed using the latest MSFS standards, including intuitive and easy-to-use controls for rotary knobs, multi-position switches and levers
Fully compatible with MSFS VR mode
EFB tablet with a plethora of features including boarding simulation, failures menu and interactive checklists, as well as SimBrief and Navigraph supportFully interactable and customisable paper charts and checklists
LIVERIES
The 146 comes with a variety of airline liveries from the UK, USA, Australia, Europe and more.
146-100
Air France Express (G-JEAT)
AirUK (G-UKPC)
British Aerospace demonstrator (G-SSSH)
Dan-Air London (G-BKMN)
Formula One Flight Operations White (G-OFOM)
Formula One Flight Operations Silver (G-OFOA)
Jersey European (G-JEAO)
Pacific Southwest Airlines (N246SS)
United Express (N463AP)
146-200
AirCal (N146AC)
Air Canada Jazz (C-GRNZ)
American Airlines (N699AA)
Cello Aviation (G-RAJJ)
Cobham Aviation (VH-NJG)
Continental Express (N406XV)
Jota Aviation (G-SMLA)
QantasLink (VH-NJJ)
SN Brussels Airlines (OO-DJJ)
USAir (N165US)
Crossair (HB-IXD)
Discovery Air (N882DV)
146-200QC
TNT Airways (OO-TAZ)
Titan Airways (G-ZAPK)
146-200QT
TNT Airways 1990s (G-TNTA)
Ansett Australia Airlines Cargo (VH-JJZ)
Titan Airways (G-ZAPR)
146-300
Aer Lingus (EI-CTO)
Air New Zealand (ZK-NZN)
Ansett Australia (VH-EWM)
Astra Airlines (SX-DIZ)
British Airways (G-OINV)
Eurowings (D-AQUA)
Cobham Aviation Services (VH-NJN)
Flybe (G-JEBC)
KLM UK (G-UKAC)
Buzz (G-UKID)United Express (N615AW)
146-300 QT
ASL Airlines (EC-MID)
Australian Air Express (VH-NJM)
Jota Aviation (G-JOTE)
TNT Airways (OO-TAD)
CC.Mk2
RAF Statesman modern (ZE701 – Queen’s Flight)
RAF Statesman 1980s (ZE701 – Queen’s Flight)
C.Mk 3
RAF (ZE708)
A PSD Paint Kit (2.1GB) is also available to download.
SYSTEMS
146 Professional features custom-coded aircraft systems with a high degree of complexity and depth, including:
Air-conditioning and pressurisation system
Automatic and manual pressurisation modes with control of outflow valves, barometric and cabin rate settings, indications and cabin altitude warnings
Cabin altitude and differential values based on real-world data
Automatic and manual flight deck and cabin temperature control – takes account of ambient temperature, air supply from the engines and/or APU, fresh or recirculated air and even whether the doors are open!
Auto-flight system
Autopilot and flight director system with multiple modes:
- Pitch - altitude arm and hold, vertical speed, IAS, Mach, glideslope and go-around
- Roll – VLOC, BLOC, LNAV (FMC) and HDG
- Turbulence mode
- Pitch and bank selection and hold
- Sync mode for quick changes to aircraft attitude
Fully-functional mode annunciations, engagement and disengagement criteria (including roll and pitch rate cut-out and stall cut-out) and integration with ADI and HSI
Simulated CAT 2 approach monitoring system
Electronic Flight Bag (EFB)
The aircraft is equipped with a tablet EFB for controlling various aircraft options and payloads, including:
Set fuel quantity in individual tanks (including total fuel weight, automatically split between tanks)
Set payloads in passenger cabin and cargo holds (including Zero Fuel Weight)
Control the pilot and cabin announcements
Quickly select aircraft states (Ready for Take-off, Turnaround and Cold-and-Dark)
Toggle ground power unit (GPU) and chocks
Monitor CG position and automatically set take-off trim based on CG
Aircraft configuration menu with many options, including altimeter sync, traditional/TCAS VSI, state saving, cabin lighting, model options and much more
The EFB can also be used for flight planning and monitoring:
Import your SimBrief flight and view a summary or scrollable full OFP
Monitor your position in real time using a map view with tracking, zoom and pan options
Explore and view your Navigraph charts
Use a notepad for making notes during the flight, particularly useful for noting down clearances and taxi instructions
Flight Management System
Two fully functional FMSs for lateral navigation (LNAV): a 'Modern' option based on the popular Working Title Pro Line 21 FMS and a 'Classic option simulating the Universal UNS-1 FMS
Up-to-date AIRAC cycles (Working Title FMS updated via the Navigraph MSFS database; Universal UNS-1 updatable via the Navigraph Hub app with a subscription)
Lateral navigation integration with LNAV autopilot mode and HSI
Ability to manually input full flight plans
SimBrief flight plan import function
Import flight plan from MSFS main menu (Working Title FMS only)
SID and STAR support
Holding pattern support
Navigation and performance monitoring
Communication system
Dual VHF COMM, NAV and ADF radios, with 8.33kHz spacing support
Cockpit voice recorder test and indication systems
Functioning audio selector and PA chime
Electrical system
Independent engine, APU and external power (AC and DC) sources
Generator and TRU loading, and automatic load switching
Standby generator and inverter power sources for non-normal procedures
Independent AC channels, including normal, essential and emergency busbars, and bus-ties facilities
Fire protection system
Engine, APU and fuselage fire detection and warning systems
Engine fire extinguishing system
Fully simulated test functionality
Flight controls
Servo-tab simulation – the position of elevator and aileron surfaces is dependent on servo-tab control inputs and airflow over the surface
Iconic tail-mounted airbrakes, roll and lift spoilers with independent hydraulic sources, realistic deployment times and custom AC and PTU pump sounds
Flight control disconnect and yoke control lock functionality
Accurately simulated flap system with hydraulic and electrical power sources, baulk override, fault testing and iconic howl when deployed in the air
Stall identification and warning systems, including stick shaker and pusher, and inhibit mode
Simulated configuration warning system
Flap Trim Compensation (FTC) system on the 146-300
Fuel system
Realistic fuel load and burn based on real-world data
Simulated electrical normal and hydraulic standby fuel pumps, centre and wing tanks with feed tanks for each engine, and LP and HP fuel cocks
Fully functional centre-to-wing fuel transfer, cross-feed and common-feed valves
Auxiliary fuel tanks fitted (can be toggled via the EFB) to provide additional range - great for bizjet operations
Hydraulic system
Independent yellow and green hydraulic systems with realistic pressure, quantity and supply to other systems
Simulated AC- and DC-driven back-up pumps and power transfer unit (PTU)
Functional standby generator for supplying AC and DC electrical power in non-normal situations
Simulated depleting brake pressure over time when hydraulic supply is removed
Simulated airbrake deployment over time when hydraulic supply is removed
Ice and rain protection system
Ice detection and accumulation simulation, anti-icing and de-icing functionality for exterior surfaces, warning systems for in-flight monitoring
Simulation of separate inner and outer wing anti-icing, and windscreen overheating
Indicating and recording systems
A vast array of annunciators, including accurately simulated Master Warning System (MWS) with amber and red cautions, audible warnings and ground testing for all systems
Flight Data Entry Panel (FDEP) for entering flight details (date, flight leg and number)
Landing gear
Normal and emergency gear extension, including gear down-lock override
Gear configuration indication and warning systems
Simulated brake accumulators supplied via the hydraulic power sources (yellow or green), anti-skid and brake temperature indicator with cooling down periods that are affected by ambient temperature, brake usage and brake fans
Captain and First Officer tillers for realistic nose-wheel steering
Navigation systems
Transponder with TCAS (integrated with VSI TCAS display) and flight ID input functionality
Dual RMI/DBI and HSI navigation instruments, fed by two NAV and ADF radios, including DME hold function
Instrument source selector for NAV 1, NAV 2 or dual navigation via the ADI, HSI and auto-flight system
Choice of traditional or TCAS VSI
Fully functioning test modes on navigation instruments (e.g. HSI, radio altimeter and ADI)
Custom-coded GPWS with modes 1-6, steep approach mode, flap warning override and test functionality
Oxygen system
Flight crew and passenger oxygen systems with valve and mask deployment controls
Pneumatic system
Realistic bleed air demand from engines and APU, and pneumatic supply to air-conditioning and ice protection systems
APU
Realistic APU start and shutdown procedures, and bleed air and electrical power supply
RPM, TGT and fuel burn values based on real-world data
Doors and stairs
Animations panel for controlling passenger and service doors, lower cargo doors and fuselage cargo door
Deployable airstairs, powered by the Yellow hydraulic system
Doors and airstairs can be controlled manually via their respective handles and levers in the cabin
Power plant
N1, N2, TGT, oil pressures and temperatures will all differ subtly between engines
Accurately simulated Thrust Modulation System (TMS) with take-off (full or flexible), maximum continuous thrust, TGT and descent modes. Takes account of engine bleed air requirements, e.g. for air conditioning and ice protection systems.
Realistic engine start procedures with external, APU or cross-start sources
Simulation of ground and flight idle baulks
Take-off and landing speed card which automatically displays reference speeds depending on current aircraft weight, and settable airspeed indicator and engine instrument bugs
Lighting
Independent lighting controls for Captain and First Officer
Dimmable integral lighting for each panel
Dimmable dynamic flood and storm lighting for a highly immersive and customisable night environment (more than 10 individual light sources, including entry, lap, sill and flight kit)
Freely moveable lap and sill lighting
Accurately simulated exterior lighting, including wing, logo and runway exit lights, and taxi/landing and navigation lights with different intensities
Realistic passenger cabin and cargo area lighting
Sounds
MSFS-native (Wwise) sound package taking full advantage of the new MSFS capabilities
Studio quality Lycoming ALF-502 engine noise recorded from RAF C.Mk3 ZE708
Over 450 flight deck sound effects recorded from RAF CC.Mk2 ZE701
Detailed equipment audio such as the APU, brake fans, electrical circuits, hydraulic equipment and many more
Distinctive flap retraction/extension airflow ‘howling’ sound
Detailed physics-based effects on engine and wind noise
Accurately positioned 3D sound sources (best enjoyed in VR!)
Custom crash and scraping effects
Cabin audio for chimes, airstairs and doors, and even a functional coffee maker!
Fully functional music player with seven music tracks as standard and the ability to import custom music tracks
FDE and effects
Realistic and accurate performance in the air and on the ground, using unique flight models for all variants based on real-world performance and handling data, and input from real-world 146 pilots
Custom effects for enhanced immersion, including engine, GPU and APU exhaust haze
Complete exterior lights package as seen on the real 146, including landing, wing, runway, logo and taxi lights that illuminate objects and the ground, for ease of operation during the hours of darkness
Passenger cabins
Highly detailed and fully interactable passenger cabins for each of the 146 variants
Unique 146 cabin features include a curved aft cabin where seat layout reduces from a 3+3 to a 2+2 configuration for the last few rows, window blanks and smaller overhead bins
Extensive simulation of the cabin environment, including fully animated and interactable cabin doors and airstairs, lighting controls, cabin call panels and even a functional coffee maker and circuit breakers
Ground service electrical bus simulation
Independent lighting controls for galleys, ceiling, side wall, toilet and worktop.
AUTO CABIN CREW option on the EFB that, when enabled, simulates the cabin crew performing their duties during the flight, including responding to cabin call chime, playing cabin music during passenger boarding and after landing, and performing passenger announcements
Fully simulated music player with play, pause, skip, shuffle, repeat and volume functions
Potable water that depletes throughout the flight and varies depending on coffee maker usage
Freighter cabins included for 200QC, 200QT and 300QC
Other features
260+ page PDF Operations Manual with flight tutorial, systems guide, procedures, limitations and handling notes
20+ page PDF EFB manual with detailed information on all EFB features
50+ page UNS-1 Operations Manual
Multiple interior and exterior camera presets, including wing views
PSD Paint Kit (2.1GB) available so you can create your own paint schemes
Full support for MSFS checklists (manual and Automatic/Co-pilot modes)
Support for numerous control assignments for compatibility with controllers and hardware
GSX compatible; aircraft profiles included for each 146 variant
A beautiful Aircraft with nice addition like callouts from the Copilot in Takeoff and flap speeds. The Behavior in flight feels very nice. For me it is the best addon plane for Msfs cause also most of the buttons can assign to hardware inside MSFS.
Super fun airplane, and despite the old-style cockpit, not very difficult to fly at all. Highly recommend for anyone wanting something different from the usual airliner, and don't be afraid to use the FMS if you need it!
It's cool to land Boeings and Airbuses on CATIII autoland, but this plane is much more fun and challenge to fly it! Get yourself a VOR/NDB only flight plan, disable FMC and you won't get bored during the flight. The manual itself is not as big and detailed like on those study level airplanes, but I still needed to study it and get some takeoff/landing training before I could fly this airplane. So it is kind of a study level machine. This is not my first Just Flight plane, I am getting more happy with each new one, so can't wait for them to release Fokker!
My conclusion is, that everyone who is passionate about retro aviation, should get this plane, to feel what it was like, to fly a classic jet, as it feels great!
An incredible well done aircraft with plenty of fun to be had at the controls. Its a great change from the flying calculators like the A320 that are out there. It is my current go to plane for cargo runs as we don't have a whole lot of choices right now MSFS2020. It sounds great! Flies great! Grab it now if you want a fun challenging plane!
An excellent product, lot's of YouTube video reviews out there if you want to research deeper.
In short it gives good value for your money, multiple types 100,200,300 pax and cargo variants.
Good graphics, convincing sound set, and a nice flight model. An interesting jet with advanced capabilities prior to pure glass MFD cockpits. The built in checklist's are easy to follow and work well to be successful operating as a single pilot. Simbrief and Navigraph integration is well executed. Not much else to say other than I think it's safe to say if this is an aircraft type you like buy with confidence.
I got this plane from Just Flight website and this bird did not dissapoint! The sounds and handling are spot on, it is fairly easy to learn to fly it and i have not yet noticed any bugs. I got it on release and have flown it around the world in any weather conditions. Just Flight is by far one of my favorite 3rd party devs in MSFS and this just prooves how far they are able to go. Also i use Aerosoft traffic and is was in a collition course and the plane also noticed this and told me to pull up. Never experienced that before in any plane.