TURBINE SOUND STUDIOS - 波音 747-200 GE-CF6-50C 高清音效包 飞行员版本 FSX
TURBINE SOUND STUDIOS - 波音 747-200 GE-CF6-50C 高清音效包 飞行员版本 FSX
EUR 12.85 含增值税
EUR 11.08 不含增值税 
$
£
¥
  • TURBINE SOUND STUDIOS - 波音 747-200 GE-CF6-50C 高清音效包 飞行员版本 FSX
  • TURBINE SOUND STUDIOS - 波音 747-200 GE-CF6-50C 高清音效包 飞行员版本 FSX
  • TURBINE SOUND STUDIOS - 波音 747-200 GE-CF6-50C 高清音效包 飞行员版本 FSX
  • TURBINE SOUND STUDIOS - 波音 747-200 GE-CF6-50C 高清音效包 飞行员版本 FSX
  • TURBINE SOUND STUDIOS - 波音 747-200 GE-CF6-50C 高清音效包 飞行员版本 FSX
上架日期: .
08/31/20159597

Turbine Sound Studios proudly presents the Boeing 747-200 GE-CF6-50C Pilot Edition soundpackage for FSX recorded in HD High definition.

飞行员版本代表如同从驾驶舱听到的声音。

本产品专门为“CLS 747-200 FSX 模型”开发( 其他模型也可使用本音效包 )。

本音效包包含:

  • 外部发动机声音
  • 内部发动机声音
  • 风声
  • 驾驶舱环境声
  • 起落架声音
  • 喊话和警告声音
  • 起落架收上警告声
  • 超速
  • 失速
  • 自动驾驶断开
  • 坠毁

All recorded in HD and compiled to meet Microsoft Flightsimulator specifications.

CF6-50

The CF6-50 series are high-bypass turbofan engines rated between 51,000 and 54,000 lb (227.41 to 240.79 kN, or '25 tons') of thrust. The CF6-50 was developed into the LM5000 industrial turboshaft engines. It was launched in 1969 to power the long range McDonnell Douglas DC-10-30, and was derived from the earlier CF6-6.

Not long after the -6 entered service, an increase in thrust and therefore core power was required. Unable to increase (HP) turbine rotor inlet temperature, General Electric chose the expensive path of reconfiguring the CF6 core to increase its basic size. They removed two stages from the rear of the HP compressor, leaving an empty air passage where the blades and vanes had once been. Two booster stages were added to the LP (low pressure) compressor, which increased the overall pressure ratio to 29.3. Although the 86.4 in (2.19 m) diameter fan was retained, the airflow was raised to 1,450 lb/s (660 kg/s), yielding a static thrust of 51,000 lbf (227 kN). The increase in core size and overall pressure ratio raised the core flow, decreasing the bypass ratio to 4.26.

In late 1969, the CF6-50 was selected to power the then new Airbus A300. Air France became the launch customer for the A300 by ordering six aircraft in 1971. In 1975, KLM became the first airline to order the Boeing 747 powered by the CF6-50. This led further developments to the CF6 family such as the CF6-80. The CF6-50 also powered the Boeing YC-14 USAF AMST transport prototype.

The basic CF6-50 engine was also offered with a 10% thrust derate for the 747SR, a short-range high-cycle version used by All Nippon Airways for domestic Japanese operations. This engine is termed the CF6-45.

PLEASE NOTE : Sound quality can be reduced in the promotion video ( Video converting )

浏览详情
产品支持联系方式
交付方式
直接下载
文件大小
179MB
注册密钥交付方式
本产品不提供注册密钥,只需运行下载文件即可安装产品。
使用需求
FSX
购买了该商品的顾客还买了
RAZBAM - EA-6B PROWLER
EUR 25.51 含增值税
EUR 21.99 不含增值税
热销商品
每周 |  历史销量 |  开发商
客户评价
FSX3D - 法国-卡尔维-圣凯瑟琳机场 LFKC FSX P3D
Evgeny
good scenary, but for a newest soda update is needed, hope the author add this for everyone;)
FLYSIMWARE - FALCON 50 “猎鹰50” 三发公务机 FSX P3D
Stefan
A great addon! Nice model with some animations and a detailed interior, excellent hand flying, an brief yet complete documentation, an interactive load manager and the choice between a rather analogue cockpit and the possibility to retrofit it with a more advanced GPS device like the GTN 750 and the REX weather radar (both to be purchased separately-not included!)! -
I love this bird!
JUSTFLIGHT - A318 JETLINER
Lewis
I have owned this for a year or two now, it sits in the LITE area of complexity. Wh-
ich means since you are alone in the cockpit work load is reduced by half, which in a way makes it feel even more realist (more time to focus on the flying). It has a basic FMC which operates alone quite well, you can load saved flight plans into, also it will plan major routes automatically and also has a direct to function. Overall it is a slimmed down FMC which works well without the need for external plugins (FSUIPC). Th-
e 3D model is up there with the best, the cockpit is a custom made on, it is a little basic and similar to the Default A321. Flight model is pretty good, it is a little underpowered, and has a tendency to want to "nose down" during decent but over all its really good. (I have actually made a few tweaks to the config to get it to make real world performance and its a dream to fly now). There is NO FLY BY WIRE though, but for this price you cant complain, and performance and framerates are so high that you can forgive this. These days it's the only airliner I fly! And, set up correctly she will fly from Shannon to New York just like the real aircraft can. I found using the sound from the Aerosoft A319 suits this aircraft the best but the default sound is also very good. Overal-
l a lovely aircraft and great fun to fly.
STINN PACIFIC - 印度-孟买-贾特拉帕蒂·希瓦吉国际机场 VABB FSX-SE
Aadi
Hands down one of the best scenery for VABB!I will surely recommend it to everyone!
STINN PACIFIC - 印度-孟买-贾特拉帕蒂·希瓦吉国际机场 VABB FSX-SE
Aadi
One of the Best VABB scenery! I really loved it! Only if you add some buildings and the fire depot of the airport it will be a great airport!
FLIGHT SIMULATOR INNOVATIVE ADDONS - 模拟飞行副驾驶插件 TFDI 717版本 FSX P3D
Joe
Outstanding! Great addition and also great value per dollar. This first officer is well conceived and just as well executed. It isn't frequent to encounter a skilled programmer who also has a good sense of human interfaces and gui. After my experiences with other add-on copilots, I hesitated on this for several weeks. I shouldn't have. It is just what I wanted in this type of add-on. With this I'm learning a lot of the little things I haven't been doing. I can to a sense learn by example, beginning with letting the first officer do almost everything, then taking more onto myself. I've been an amateur flight simmer for 30 years and can complete a flight with any aircraft. But, I've always known I was taking advantage of the limitations of the sim and cutting many corners. This first officer is teaching me new things and adding a lot to my enjoyment of the flights with him. Thank you, Matthew King! Great Job!
THRUSTMASTER - TCA 侧杆 空客版本
Ian
Very good stick for a reasonable price. The only negative I can give is that it sometimes slides around my desk when I’m using it. The rubber feet could be better. But again, I cannot fault it’s operation. My landings have actually got better since using it.
FLYSIMWARE - FALCON 50 “猎鹰50” 三发公务机 FSX P3D
Per Emil
Love this aircraft! Th-
is is a high fidelity simulation of the Dassault Falcon 50 of which I am really in love with. Flies great, handles great, truly a joy to fly. This is by far the best business jet for P3D. Really reccommend it!
DIGITAL DESIGN - 法国-里昂-圣埃克絮佩里机场 LFLL P3D
Peter
Just a beautiful airport. Digital Design's best to date imo. The modelling, detail, textures, and use of PBR are very good. Now one of my favourite airports to fly to in Europe.
JUSTSIM - 比利时-布鲁塞尔国际机场 EBBR V2.1 P3D5
Bernd
Very nice work. Whilst Andrei is already on a very high level, he is getting even better from update to update. The overall impression of this scenery is very realistic. Especially the ground texturing of the taxiways and the aprons are outstanding and have a crisp and natural look. Also the reflections of the markings on the concrete look very natural. Andrei is using PBR where it makes sence and give this additional portion of realism. The night ilumination is also very realistic. I´am really looking forward to the V5 updates of LFMN and his other artworks, because the visual quality he delivers combined with the grade of high details and the performance is his trademark and worth every single penny.
您居住的国家或地区