0

BELL X-1 SECOND GENERATION

€ 17.25
BELL X-1 SECOND GENERATION

BELL X-1 SECOND GENERATION

XTREME PROTOTYPES

Details

  • 出版商

    XTREME PROTOTYPES

  • 销售人

    XTREME PROTOTYPES

  • 文件大小
    383.47MB
  • 上架日期
    2009-07-11
  • PID
    3841
  • 试用版本

    下載

  • 产品描述

    Bell X-1 Second Generation FSX Package

    The Xtreme Prototypes X-1 Second Generation add-on package for Microsoft® Flight Simulator X contains six variations of the four Bell X-1 Second Generation research rocket planes and one light variation of a modified B-29 "Superfortress" carrier aircraft to simulate high-altitude launch.

    The Bell X-1 "Second Generation" was an advanced version of the original X-1, the first aircraft in history to have broken the sound barrier with Army Air Corps captain Charles E. "Chuck" Yeager.

    The second generation of X-1s, built in the late 1940s and early 1950s, were designed to double the speed of sound and set new altitude records in excess of 90,000 feet. The new X-1s were similar to the original (orange) aircraft, with the same XLR-11 rocket engine (equipped with a turbopump), but were about five feet longer, 2500 pounds heavier and had a conventional glass canopy.

    For the serious flight simulation enthusiast and X-1 fan, the Xtreme Prototypes X-1 Second Generation is a chance to relive important moments of the history of flight and experience the performance of a series of aircraft whose new rocket systems, cockpit ergonomics and flight controls were quite a challenge for the test pilots who flew them more than fifty years ago.

    The Xtreme Prototypes X-1 SG addon package will allow you to fly at very high altitudes at more than twice the speed of sound in four different versions of the aircraft, simulate virtually all the procedures required during an actual research mission (including emergency procedures such as extinguishing an engine fire or jettisoning the canopy to bail out), and even test the never-built X-1C that was to be equipped with the Sperry A-12 Propilot system and a .50 caliber Browning machine gun.

    Xtreme Prototypes X-1 SG for Flight Simulator Key Features

    • Custom X-1 flight model to simulate rocket-powered high-speed and high-altitude flight in FSX:
    • One Reaction Motors XLR-11-RM-5, 5900-pound four-chambered liquid-fuel turbo-rocket engine
    • High-altitude flight up to 90,000 feet
    • Supersonic flight up to Mach 2.5
    • Ground takeoff or high-altitude launch
    • Excellent gliding capabilities
    • Good maneuvrability at supersonic speeds
    • Compatible with FSX SP2, FSX Acceleration Expansion Pack and FSX Gold
    • Highly detailed 3D exterior models with more than 500 parts, 40 animations, high resolution textures and unique markings, based on archive material
    • Three fully functional and highly detailed 3D virtual cockpits with over 800 parts and 200 3D animated gauges, switches, levers, light indicators and flight instruments with "tooltips"
    • X-1-specific animated special visual effects including rocket engine ignition, combustion, shockwaves and smoke effects, propellant jettison effects
    • Automatic ignition sequence button
    • One light variation of a B-29 "Superfortress" carrier aircraft on specially-equipped X-1A and X-1D models (exterior model only, visible when the X-1 is airborne)
    • X-1 SG custom sound set
    • Camera views (external)
    • Saved flights based on X-1 SG test flights
    • A comprehensive 85-page user manual inspired from original X-1 SG flight manuals, in a printable PDF format

    Xtreme Prototypes X-1 Second Generation Add-on Aircraft Description

    The Xtreme Prototypes X-1 Second Generation add-on package for Flight Simulator X contains six variations of the four Bell X-1 Second Generation research rocket planes and one light variation of a modified B-29 "Superfortress" carrier aircraft (exterior model only) for simulating high altitude launch with specially-equipped X-1A and X-1B models:

    • Three variations of the Bell X-1A (USAF serial number 48-1384):
      • "Bell-USAF" orange version
      • "Bell-USAF" aluminum version
      • "Bell-USAF-NACA" white version
    • One variation of the Bell X-1B (USAF serial number 48-1385):
    • "Bell-USAF-NACA" aluminum version
    • One fictitious variation of the (never built) Bell X-1C (USAF serial number 48-1386):
      • "USAF" aluminum version with front machine gun, yaw-damping surfaces on wing and retractable ventral fin
    • One variation of the Bell X-1D (USAF serial number 48-1386):
      • One "light" variation of a modified Boeing B-29 "Superfortress" carrier aircraft (USAF serial number 52-1800, exterior model only, visible when the specially-equipped X-1A/D model is
    • airborne).
    • Une variante simplifiée d'un avion porteur B-29 "Superfortress" modifié (modèle extérieur seulement, visible lorsque les X-1A et X-1D spécialement équipés sont en vol, numéro de série USAF 52-1800)
       

    Each add-on aircraft is fully detailed with over 500 parts and 40 animations, and has been carefully modeled based on available drawings, flight manuals, government photographs, movies and other archive material in order to conform as closely as possible to the real-world second generation Bell X-1s.

    The airplanes feature different high resolution reflective textures with bump maps, unique markings, movable control surfaces (horizontal stabilizer with an all-moving tail and elevator, vertical stabilizer/rudder, ailerons and flaps), extendable landing gear, front machine gun, yaw-damping surfaces and a retractable ventral fin (X-1C), movable canopy with cockpit details, pilot and animated stick and levers.

    All aircraft feature more than a dozen of animated visual effects with sound, such as XLR-11 rocket engine igniter and flame effects, rocket engine contrail effects, engine smoke and fire, machine gun effect (X-1C), wing vortices, liquid oxygen bleed effect, propellant jettison effects and cold vapor around the LOX tank when filled.

    The X-1 Second Generation for Flight Simulator X is equipped with one Reaction Motors XLR-11-RM-5 four-chambered liquid-fuel turborocket engine, capable of delivering more than 5,900 pounds of thrust.

    Fully Functional 3D Virtual Cockpits

    Each aircraft comes with a fully functional virtual cockpit which contains over 800 parts and more than 200 animated gauges, switches, levers, light indicators and flight instruments. Each virtual cockpit has been meticulously created to conform as closely as possible to the cabin of the real second generation Bell X-1.

    The full 3D gauges have been carefully designed and programmed based on the original analog instruments found in the real X-1 SG during the 1950s. Virtually all gauges, switches, lights and instruments found on each panel are functional and behave like the original ones found in the real aircraft. All custom rocket aircraft systems present in the real X-1 SG are also simulated.

    Three different VC configurations are available for the X-1 SG for Flight Simulator X.

    The virtual cockpits allow total 3D immersion into the X-1 SG flying environment and have been created for the desktop pilot to simulate almost every step and procedure required during a typical X-1 research flight.

    The VC has (fictitious) cockpit spotlights that are lit when the cockpit lighting switch is turned on (the real X-1 did not have cockpit lighting). This will allow you to fly the X-1 SG even at night.

    The four Xtreme Prototypes X-1 SG virtual aircraft are equipped with a modified (fictitious) ARC-5 radio for use with civilian frequencies in Flight Simulator X. The set has two VHF communication transceivers (COM1 and COM2), an automatic direction finder (ADF) and a radio-navigation receiver (VOR) to allow for a fictitious journey around the world in your X-1 at speeds beyond Mach 2.

    X-1 SG Pilot's Operating Instructions (Manual)

    The Xtreme Prototypes X-1 Second Generation aircraft package comes with a comprehensive 85-page user manual inspired from the original Bell X-1 SG manual (PDF format, Adobe® Reader® 8.0 or later required).

    The manual contains the necessary information for the installation and operation of the X-1 SG virtual aircraft, 3D cockpits and associated instrument panels.

    The end-user is authorized to print copies of the manual for his/her own use, in conjunction with the add-on simulation software.

    Product Specifications (Xtreme Prototypes X-1 Second Generation for FSX)

    GENERAL FEATURES

    Contains six variations of the four Bell X-1 Second Generation research rocket planes and one light variation of a modified B-29 "Superfortress" carrier aircraft for simulating high-altitude launch:

    • Three variations of the Bell X-1A (USAF serial number 48-1384) - ("Bell-USAF" orange, "Bell-USAF" aluminum, and "Bell-USAF-NACA" white
    • One variation of the Bell X-1B (USAF serial number 48-1385 - "Bell-USAF-NACA" aluminum version)
    • One variation of the (never built) Bell X-1C ("USAF" aluminum version with front machine gun - serial number 48-1386)
    • One variation of the Bell X-1D ("Bell-USAF" aluminum rollout version - USAF serial number 48-1386)
    • One "light" variation of a modified Boeing B-29 "Superfortress" carrier aircraft (USAF serial number 52-1800, exterior model only, optional, visible only when the X-1 SG is airborne).

    FLIGHT MODEL FEATURES

    Custom X-1 flight model to simulate rocket powered high-speed and high-altitude flight in FSX:

    • One Reaction Motors XLR-11-RM-5, 5900-pound four-chambered liquid-fuel turbo-rocket engine
    • High-altitude flight above 90,000 feet
    • Supersonic flight up to Mach 2.5
    • Ground takeoff or high-altitude launch
    • Good maneuverability at supersonic speeds
    • Excellent gliding capabilities
    • Compatible with FSX SP2 and FSX Acceleration Expansion Pack (or FSX Gold)

    CUSTOM X-1 ROCKET AIRCRAFT SYSTEMS

    The following rocket aircraft systems are simulated to conform as closely as possible to the operation of the real second generation X-1 rocket aircraft, within the present limitations and capabilities of the simulator:

    • XLR-11 power plant system and control
    • Turbine-driven propellant pump and control
    • Fuel system
    • LOX system
    • Hydrogen peroxide system
    • Nitrogen system
    • Electrical system (with DC-AC conversion)
    • Fire detection/extinguisher system
    • Custom rocket aircraft instruments, controls and gauges, including dome loading pressure regulators and spill valves
    • Emergency jettison system
    • Pilot's oxygen system
    • Droplight system (countdown and launch from a B-29 carrier aircraft on selected models)
    • Cabin pressurization system

    AIRCRAFT 3D MODEL FEATURES
     

    • Genuine FSX models, compatible with Windows Vista and DirectX® 10
    • Highly detailed (X-1 SG) exterior models based on archive material, with more than 500 parts and 40 animations
    • Light B-29 "Superfortress" carrier aircraft with animated propellers and control surfaces (see description above)
    • Reflective high-resolution textures with bump maps
    • Emissive (night) textures
    • Unique (historical) markings and liveries on each aircraft
    • Movable aerodynamic control surfaces:
    • X-1 all-moving tail (elevator trim)
    • Elevator
    • Ailerons with trim tab
    • Flaps
    • Vertical stabilizer/rudder with trim tab
    • Retractable ventral fin (X-1C)
    • Yaw-damping surfaces on wings (X-1C)
    • Highly detailed steerable front gear
    • Highly detailed main landing gear
    • Movable glass canopy (with jettison animation)
    • Cockpit details including seat, pilot and animated sticks, levers and parts
    • Functioning nose-mount .50 cal. machine gun (X-1C)
    • Antennas, pitot tube and research probes
    • Rear propellant jettison tubes and engine turbopump exhaust pipe
    • XLR-11 rocket engine combustion chambers (4)

    3D VIRTUAL COCKPITS
     

    • Three (3) highly detailed 3D virtual cockpits (X-1A/D, X-1B and X-1C) with over 800 parts and 200 3D animated gauges, switches, levers, light indicators and flight instruments with "tooltips"
    • Advanced fully functional instrument panels with custom X-1 rocket aircraft systems
    • Center pedestal (switch) panel
    • Highly detailed seat, side controls, levers, pedals, oxygen regulator, hoses and pipes, and other cockpit items (many animated and functional)
    • Modified ARC-5 VHF radio for use in Flight Simulator (COM1, COM2, ADF, VOR)
    • Navigation instruments (fictitious, optional)
    • Cockpit lighting (fictitious, optional)
    • Sperry A-12 Propilot (X-1C)
    • Gunsight (X-1C)

    SPECIAL VISUAL EFFECTS
     

    X-1-specific animated special visual effects, some with sound, including:

    • Rocket engine ignition, combustion flames and shockwave effects
    • Rocket engine smoke and contrail effects
    • Igniter test effects
    • Propellant jettison effects (fuel, LOX and H2O2)
    • Engine turbopump exhaust effect
    • N2/LOX bleed effect
    • Condensation and vapor effect around the cold LOX tank when filled
    • VC lights
    • Wing vortices and vapor trails
    • Machine gun effect (X-1C)
    • B-29 contrail effect

    MISCELANEOUS

    • Automatic ignition sequence (optional)
    • X-1 custom sound set for FSX
    • Camera definitions (external and internal)
    • Fictitious saved flights inspired from real X-1 SG test flights
    • X-1 SG aircraft kneeboard reference tab and check list (from within Flight Simulator)
    • A comprehensive 85-page user manual inspired from the original "Bell X-1A, B & D Pilot's Handbook of Flight Operating Instructions", in a printable PDF format

    NOTE: Specifications are subject to change without notice. Check our web site for fixes and upgrades.

    使用需求

    • Flight Simulator: Microsoft® Flight Simulator X with Service Pack 2 (Service Pack 2 required, FSX Acceleration Expansion Pack or FSX Gold optional)
    • Operating System: Windows® XP SP2 (256 MB RAM), Windows® Vista™ (512 MB RAM)
    • Processor: 1.0 GHz
    • Hard Drive: 15 GB (space required to install Flight Simulator)
    • Available Disk Space: 650 MB (space required to install the X-1 SG add-on software and documentation)
    • Video Card: 64 MB (128 MB or more recommended), DirectX® 9.0 or later
    • Other: Sound card and speakers, joystick, wheelmouse, Adobe® Reader® 8.0 or later

    NOTE: Xtreme Prototypes addons are complex and require more processing power and RAM than other more conventional add-on aircraft packages. Increased performance will be noticed on more powerful systems. FSX SP2 minimum system requirements recommended.

    购买了该商品的顾客还买了

    安装我们的桌面应用程序

    直接在应用程序中安装

    现在下载

    € 17.25

    与朋友们分享

    复制链接或直接分享到社交网络