Reviews (by Shanard)

Well done scenery. It captures the essence of the real airport. The surrounding area is a sight to see.

This is a great representation of Ushuaia. The terminal is well modeled, except for the interior (which I would have liked to see). The great markings look like the real life counterpart, with the right amount of consistency of dirt, oils, stains etc. One thing I did notice is some of the modeling is a bit flat on the rocks near the entrance of the terminal, which should have had a bit of a 3d look. Overall the surrounding scenery is very well done!

Well done airport! The approaches and departures are very challenging. If you want to test your skills, check out Cusco's Topia!

First off, thanks for the update to MSFS. The airport gives a good feel as you're really there. The surrounding area is detailed well, except for the middle of the airport and ramps. There is a issue with the taxiway between A5 and A. The ground is uneven and you can actually see it in the sim and the 2nd picture for the preview of KBHM. Overall, not bad but it needs some work.

Last time I flew in to Bermuda it was in P3D v5. LVFR did a great job with the fsx/p3d platform. This is a much, more detailed step up from fsx/p3d legacy scenery. Perfect blend with the surrounding scenery. I did notice a flicker on the glass of the new terminals but I'm sure they will correct that. Challenging approaches, beautiful scenery and well-placed static objects. A few hours from Boston, Miami and Charlotte. A must buy!

Good price. An accurate rendition of the new terminal structures at SLC. The terminals match the the charts and maps which helps when identifying the right gates. The terminals are lacking details and quality. Some clutter and other object would have been nice to see. Overall not bad. 4 stars.

Going from default, this is a huge improvement. The whole scenery is modeled accurately with fine details like the inside of the terminal. Great work, top Tier.

A good rendition of KSAV airport. New terminal, tower and buildings look like the real airport. The textures are lacking however. At gates you can notice it right away. The windows to the terminal are dated and not up to par with MSFS 2020 default textures. Some jetways are missing from gates as well. The customs building and the parking next to it is missing. The car parks are good but the vehicles are sunken in the building partially. Overall, a decent update but it has room for improvement. 3 stars.

Much better! The overall sounds are better especially from T/O to CLB and CRZ. Could have had better sounds for the fuel pumps and levers, etc.

TSS always brings high-level sound quality. A step up from the RR sounds. The spool up sounds are more consistent and the overall sounds are clearer. They could have been more louder but still a great improvement from default.

Well done. Got both ATL and CLT. Two of my favorite locations to fly in P3D. Much better than default (obviously)! Looking forward to seeing more work from Alpine Simulations!

A very detailed version of Atlanta City. Default was lacking a lot of buildings and this has accurate buildings and more autogen. I look forward to seeing more cities, updates and improvements to current sceneries.

It makes a difference! For the CS 767 GE this adds some more immersion and better sounds. After having a few TSS products, I am impressed.

I had the E175 Max sounds and I was really impressed with TSS sounds. So I got this one for the E-Jets v3 and it's much better. No issues here. A must have.

I have to admit I was a bit skeptical. However, the new update to KMCO is clearly seen. There are some texture anomalies/flickering on the ground but I'm sure it will be fixed with the next update. I did a comparison from the older FSX to P3D v5 and it's very different, better and a must have. Thanks T2G!

A huge improvement from the default scenery. Some ground textures are not as detailed however, that can be overlooked. Well done.

The overall scenery is great. However, the buildings are lacking. PANC is good airport to have.

Really makes a difference. Lighting looks more natural and more accurate.

Thank you for the update. It's better, it's free, what more can you ask for?!

Very nice airport; detailed objects, textures and overall scenery. However, there are some textures bleeding through the ground. In addition, the photoreal should have had more autogen placed. The SODE jetways are a plus which makes this scenery a 4.

Montego Bay is a lovely place to visit. This airport gives life to this region. Very good details building, static objects and photo scenery. However, I dislike the lack of instructions for the SODE jetways. GSX jetways would look much better in this instance. No issues, good frame rates and overall decent scenery to have.

I was a bit hesitant getting this since I had another KSEA, but I love that DD has updated their airports and continue to maintain accuracy of current and past airports they release. I love the new sky bridge that is 85 ft in height which is something previous versions didn't implement. The scenery absolutely works with ORBX, Pilot's Ultimate Terrain and Seattle City X.

Well done airport and surrounding scenery. I love the autogen, and custom buildings along the streets. Night lighting is not so great but that's not a major concern. Very frame rate friendly even with AI. A new vacation destination.

Not sure if previous rating was correct but this scenery is truly amazing.

Two thumbs up! A little hit on my FPS but it's manageable!

Absolutely stunning scenery. DD keeps getting better and better! I love the blend with ORBX; a seamless transition.

The P3D v3+ update has outstanding dept and detail. I had the vol. 1 and 3 for FSX and I'm pleased with the new updated version.

Outstanding photorealistic scenery that blends well with ORBX. It adds more detail than ORBX (obviously). The city is very beautiful with custom building but would have like to see more custom buildings in the surrounding area instead of default P3D buildings. No other issues!

Thank you DD! Very detailed airport; moving vehicles, objects and static aircraft that blend very well with airport and AI aircraft. I noticed some trees in the on the taxi way but other than than no issues. Great FPS and performance.

EBBR is a highly detailed airport, very smooth on frame rates and crisp textures. No issues; it's a must have!

This is my first Justsim scenery and I'm very impressed. Not one of the big name devs but they are in the top ten. Great details and textures in the buildings, taxiways and objects. No regrets!

New Orleans is a beautiful city. The highways and bridges are well placed and the overall textures look really good. Another note are some of the surrounding airports don't match the scenery. If you are using ORBX you have to turn off the LC to LC_xxx.bgl.off. There were some issue with the ground textures around the river and the coastline. Otherwise flying in and out of KMSY have some nice approaches and departures.

LatinVFR has done it again! Besides having KRDU, KMIA and KSAN this is another great product. Just make sure you change the season in the config so you have the accurate textures for each season. I'm very pleased. Definitely looking forward to KMSY as well.

Really good aircraft to fly. It is challenging from startup to landing. A few issues are the lack of detail in the cockpit, the cockpit glass looks like it's cracking (it has long lines on either side) and it pulls to the left on takeoff (still testing that theory, but it does). I like the FMC/MCDU and the physics of the aircraft. Overall a good buy. Also the TSS sound wasn't include in this package so I bought it and it adds some realism to the aircraft, especially in the cabin.

Looks like the real thing. I haven't tried RWS before but I'm impressed with their work. HD textures and season changes is a huge plus!

Two thumbs up!! First time flying into this airport and I have no complaints. RWY 17L approach was beautiful; great textures, vehicles and building structures. It's a must buy! One of the best devs in my opinion.

This scenery will greatly improve the Boston surrounding area. There accurately placed buildings, bridges and vegetation. The only improvement would be to have night lighting however, I don't fly much at night so no issues there. This is compatible with FlyTampa's KBOS. Follow instructions on FlyTampa's site and ensure the AF2_KBOS is labeled off.

This is just an amazing airport. The night lighting is the best I've seen in P3D. Outstanding detail and very good performance.

Another very good update to KSAN for P3D v4. The new version looks much better during the day and night. There have been some issues with ORBX/SoCal on RWY 27. There is some elevation issues which creates a bleed from underlying textures. Without ORBX SoCal there is no issue but this has not be resolved but has been discussed in several support forums. Overall, it's one of the best sceneries to fly in and out.

Much better improvement from stock sounds. Engine and ambient sounds would have been a great addition to this package.

I flew in this plane (Dash 8) years ago; LIAT, which flew all over the Caribbean. The new sounds add more depth of realism. One thing I did was change some of the dynamic sounds from my backups (which was stated in previous reviews) back to the original. IMO a few of the sounds from the original Q400 sound better or what I liked. The new APU, generator, engines and cabin sounds have better clarity from stock. I hope they do more products for add-ons.

I had the FSX version and it greatly aided the ai traffic. Without it the default ATC can't handle numerous aircraft. However, there are no go arounds for ai aircraft, better approach seperation between aircraft. In P3D v4 it added STB view so hou can view the airports from a new vantange point. Great product!

It was definitely worth the wait. Good sounds, visuals, and textures. I know there are some issues at the present moment but the AS CRJ works great. There are a few differences from JR CRJ 200, ei, the NW switch that actually moves in the AS CRJ 700/900, startup and shutdown procedures are different to each aircraft. One thing I noticed is the fuel in the CRJ manager does not produce the accurate amount of fuel at times so some additional fuel is require via taxi or holding fuel section. This aircraft is very immersive and fun to fly.

No issues here. This scenery is obviously much better than the default scenery. It is very good on VAS and frame rates unlike its big brother JFK. Another great addition to Florida scenery. It took me a long time to get this one since I didn't do much flights here. Now it will be worth the flight.

This has been a long awaited scenery in my book. I'm glad LATINVFR did this one. They get scenery addons right. I've been to this airport and it doesn't fall short from the real thing.

This airport is on point. I didn't think I would fly here like other airports in FSX. However, now that I have it, I certainly will. LatinVFR doesn't disappoint. Now the terminals have moving jetways (that's a new added feature). Surrounding areas look great especially on approach to RWY 6. Another great product from LatinVFR.

Totally satisfied with JS design. You take a chance whenever you buy a new scenery for the first time. However, this was a great choice. Very detailed airport; good textures, buildings and a few static ga.

This is my second LatinVFR product since Miami and I love it. I've been to Puerto Rico many times and this scenery is perfectly done. It meshes very well with FTX Orbx Global. Five stars!

If you have LatinVFR KMIA it merges beautiful with the scenery. I had LatinVFR KMIA beforehand so I can't tell you what it looked like before. However, take note it does not work well with DX 10, aircraft shadows and high 2x water settings. I made it to KMIA landed and then FSX froze. I had to reduce water to low 2x and remove aircaft shadows on ground. But the scenery is well worth it. I changed my settings and it worked. Still 5 stars.

Another great looking airport and surrounding sceneries. I have a few other Flytampa sceneries and this doesn't fall short of the others. Added with Orbx vector the scenery blends beautifully. There needs to be an update on the jetways labels. Some had Northwest and old Delta signs. Either way still 5 stars!

I originally bought this scenery years ago and just updated to the v1.5 and it looks great. However, the update had some issues. I had to use the jetway.bgls from the original scenery to see the jetways. Overall, Flytampa has done an amazing job building the scenery to the exact detail. I'm actually from SXM and it's very close or identical to the real thing. I love that they removed the old terminal, even though they originally had it a monument. But it gives a true feel to the accuracy of TNCM. Check Flytampa's forum for any updates. Another note, runway 28 is used only for takeoffs for large aircraft and landing for GA. So naturally runway 10 is used for both landing and takeoffs in FSX. Get it!

I love this add-on to FSX. So far I've used it on my Airbus X and the Feelthere/Wilco ERJ (demo version) and I love the features. Every time I land at a different airport the GSX vehicles and personnel change to the actual airport services. You hear all the sounds of the vehicles as they approach and dock with the airplane. The air stairs, baggage carts and catering vehicles are very accurate. Only thing I wish they had was passengers coming off the buses and going into the airplane. However, you do hear them as the board. This brought FSX to it's true potential and is one of the most exceptional add-ons to FSX!